• hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Cisco C36 DWDM‑SFP‑4851‑80 Compatible 1.25G DWDM SFP Transceiver Module | 1000BASE-DWDM 1548.51nm 80km 100GHz | HYTOPTODEVICE

Cost-effective Cisco DWDM‑SFP‑4851‑80 replacement SFP, 100GHz ITU-T 1548.51nm single-mode fiber, TEC DFB laser, full DDM DOM diagnostics, zero-alarm plug-and-play for Cisco Catalyst switches, ideal for telecom metro DWDM and cell tower backhaul fiber links.
CH P/N CH P/N
C17 DWDM‑SFP‑6386‑80 C27 DWDM‑SFP‑5575‑80
C18 DWDM‑SFP‑6305‑80 C28 DWDM‑SFP‑5494‑80
C19 DWDM‑SFP‑6223‑80 C29 DWDM‑SFP‑5413‑80
C20 DWDM‑SFP‑6142‑80 C30 DWDM‑SFP‑5333‑80
C21 DWDM‑SFP‑6061‑80 C31 DWDM‑SFP‑5252‑80
C22 DWDM‑SFP‑5979‑80 C32 DWDM‑SFP‑5172‑80
C23 DWDM‑SFP‑5898‑80 C33 DWDM‑SFP‑5092‑80
C24 DWDM‑SFP‑5817‑80 C34 DWDM‑SFP‑5012‑80
C25 DWDM‑SFP‑5736‑80  C35 DWDM‑SFP‑4932‑80
C26 DWDM‑SFP‑5655‑80  C36 DWDM‑SFP‑4851‑80
Description

Cisco C36 DWDM‑SFP‑4851‑80 Compatible 1.25G DWDM SFP Transceiver Module | 1000BASE‑DWDM 1548.51nm 80km Bulk Wholesale

Product Overview

HYTOPTODEVICE C36 DWDM SFP is full pin-to-pin drop-in replacement for Cisco DWDM‑SFP‑4851‑80, built on standard 100GHz ITU-T C-band grid at 1548.51nm, delivering stable error-free 80km transmission over G.652.D single-mode fiber. Integrated TEC cooled DFB laser cuts inter-channel crosstalk, power consumption under 2W. Preloaded Cisco EEPROM eliminates unsupported transceiver alerts, with hot-swap design and SFF-8472 compliant DDM diagnostics for metro rings and remote cell backhaul.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-4851-80 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1548.51nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type PIN
TX Power 0~+5dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤2W Receiver Overload -3.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 10–15 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -3 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a PIN receiver (sensitivity ~ -24 dBm, 24 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Custom Cisco‑specific EEPROM signature eliminates alarms and port lockdown. No extra configuration or firmware upgrade is required for plug‑and‑play deployment across supported Cisco enterprise and carrier‑grade hardware.

Fully Compatible Cisco Platforms:
  • Cisco Catalyst 3850, 9200, 9300 Series enterprise switches
  • Cisco ISR 4000‑series multi‑service branch routers
  • Cisco ASR 1000‑series carrier backbone routers
  • Cisco ONS optical transport platforms supporting 100GHz DWDM SFP
  • All Cisco devices accepting original DWDM‑SFP‑4851‑80 transceivers

2. Multi-Brand Cross Compatibility

Compliant with universal SFP MSA specifications, this C36 DWDM SFP runs error‑free on Huawei, H3C, Juniper, MikroTik and other mainstream network hardware. Custom firmware adaptation is available for complex multi‑vendor DWDM environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

• Metro DWDM Ring: Dedicated C35 wavelength realizes single-fiber multiplexing to reduce carrier fiber investment
• Wireless Cell Backhaul: Passive 80km gigabit connectivity lowers remote site operation expenses
• Enterprise Cross-Branch: Low-cost private fiber for inter-office data & real-time video transmission
• MAN Service Aggregation: Isolated wavelengths avoid service cross-interference and boost network stability
• Industrial IoT Monitoring: Anti-interference optical design for long-distance smart city & factory data links
• Legacy Network Upgrade: Add C-band wavelengths without full infrastructure overhaul

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Pair C36 module with standard DWDM multiplexers & demultiplexers to carry multi-service signals on single fiber, simplify field wiring for medium-short gigabit spans.



2. 80km Long-Haul DWDM Solution

Match EDFA optical amplifiers to offset natural fiber attenuation, stabilizing DWDM signal for intercity carrier core backhaul networks.


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Ultra-low power design reduces power consumption and heat generation. The optimized single-fiber structure simplifies data center cabling, enabling cost-effective and stable gigabit Ethernet transmission.

1G Data Center Connectivity low power single-fiber Gigabit Ethernet DWDM SFP solution


2.
Verified Host Interoperability for Cisco Devices

Calibrated firmware supports zero-alarm plug-and-play for Huawei, Cisco and other mainstream devices. It solves multi-brand compatibility problems and adapts to hybrid network deployment.
Verified multi-vendor interoperability for  Cisco  DWDM SFP transceiver

3.Rigorous Testing, Uncompromising Reliability

Integrating precise wavelength locking, stable 80km long-haul transmission and multi-scenario adaptability, this module forms a complete gigabit DWDM solution. It fully meets diversified networking demands for carrier metro backhaul and enterprise long-distance interconnection.

Comprehensive 1.25G 80km C17 DWDM networking solution for carrier and enterprise deployment


FAQ

Q1: Will third-party compatible transceivers invalidate my network hardware’s original warranty?
A: In most commercial regions, MSA-compliant compatible optics do not void host equipment warranty under standard trade regulations. If your hardware enforces strict OEM identification locks, our free EEPROM customization can eliminate warning prompts to avoid maintenance disputes. Reach out to us for region-specific advice.

Q2: Can you customize transceiver coding to fit rare industrial or specialized networking equipment?
A: Our engineering team offers bespoke EEPROM re-coding for uncommon switches, legacy transport hardware and custom industrial gear. Submit your device model information, and we will craft a tailored technical plan within one working day with full support available 24/7.

Q3: Are all C36 DWDM optics fully compliant with industry Multi-Source Agreements?
A: Every C36 SFP adheres strictly to SFP MSA mechanical, electrical and optical specifications, alongside full SFF-8472 DDM diagnostic support. Form factor dimensions, pin assignments and signal characteristics match universal industry standards for seamless interchangeability.

Q4: What total optical loss budget can this 1548.51nm DWDM transceiver support?
A: This model provides a 24dB overall link budget, calculated based on its 0~+5dBm transmit power and -24dBm receiver sensitivity, supporting up to 80km of standard single-mode fiber under typical attenuation values.

Q5: How does the transceiver hold precise ITU wavelength performance over years of continuous operation?
A: A built-in thermoelectric cooler actively stabilizes the laser chip temperature, paired with factory wavelength calibration procedures. This mechanism restricts wavelength drift and maintains consistent 100GHz channel spacing during long-term non-stop operation.

Q6: Does signal loss from DWDM multiplexers lead to complete link outages?
A: The module’s 24dB loss margin absorbs standard insertion loss from MUX/DEMUX components without failure. When combined fiber, splice and multiplexer loss exceeds the total budget, EDFA optical amplifiers can be deployed to recover signal strength.

Q7: What’s the shortest fiber span I can use without installing an optical attenuator?
A: A minimum 15km fiber run is required to avoid receiver overload on this 80km DWDM transceiver. Any shorter cabling needs a 10–15dBm fixed attenuator to prevent signal saturation and permanent port damage during testing.

Q8: Is overvoltage and overcurrent protection built into this C36 optical module?
A: Integrated protective circuitry shields the laser and receiver chips against voltage spikes, excessive current and ESD surges during hot-swap insertion, extending the module’s service life in dynamic rack environments.

Q9: How does built-in thermal regulation impact DWDM wavelength stability?
A: Laser wavelengths shift noticeably with temperature swings. The integrated TEC dynamically adjusts operating temperature to lock the module to the 1548.51nm ITU channel and eliminate cross-channel interference in dense WDM systems.

Q10: What negative effects occur if the transceiver runs above its rated temperature ceiling?
A: Sustained overheating triggers wavelength deviation, increased bit error rates and unstable DDM readouts. Long-term high-temperature operation accelerates laser aging; deploy rack cooling or select our industrial wide-temperature transceivers for hot deployment spaces.

Q11: How can I view real-time DDM diagnostic data on my managed network switch?
A: Live DDM metrics including transmit power, receive power, module temperature and supply voltage are accessible via standard switch CLI transceiver commands or built-in web management dashboards, with no extra software installation needed.

Q12: What packaging measures prevent fiber end-face dirt and scratches during transit?
A: Each C36 transceiver is fitted protective LC dust caps after optical quality testing, then individually sealed in anti-static, moisture-resistant bags with shock-absorbing foam padding to guard connector surfaces from contamination and physical damage in shipping.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download