• hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Cisco C26 DWDM‑SFP‑5655‑80 Compatible 1.25G DWDM SFP Optical Transceiver | 1000BASE-DWDM 1556.55nm 80km 100GHz | HYTOPTODEVICE

HYTOPTODEVICE factory supply Cisco C26 DWDM‑SFP‑5655‑80 compatible 1.25G DWDM SFP optical transceiver. 100GHz ITU-T grid 1556.55nm wavelength, 80km single-mode long-haul transmission. Adopts Cooled DFB TEC laser and PIN receiver, low power below 2W. Zero-alarm plug-and-play for Cisco devices, suitable for carrier metro DWDM ring and wireless base station backhaul networking. 
CH P/N CH P/N
C17 DWDM‑SFP‑6386‑80 C27 DWDM‑SFP‑5575‑80
C18 DWDM‑SFP‑6305‑80 C28 DWDM‑SFP‑5494‑80
C19 DWDM‑SFP‑6223‑80 C29 DWDM‑SFP‑5413‑80
C20 DWDM‑SFP‑6142‑80 C30 DWDM‑SFP‑5333‑80
C21 DWDM‑SFP‑6061‑80 C31 DWDM‑SFP‑5252‑80
C22 DWDM‑SFP‑5979‑80 C32 DWDM‑SFP‑5172‑80
C23 DWDM‑SFP‑5898‑80 C33 DWDM‑SFP‑5092‑80
C24 DWDM‑SFP‑5817‑80 C34 DWDM‑SFP‑5012‑80
C25 DWDM‑SFP‑5736‑80  C35 DWDM‑SFP‑4932‑80
C26 DWDM‑SFP‑5655‑80  C36 DWDM‑SFP‑4851‑80
Description

Cisco C26 DWDM‑SFP‑5655‑80 Compatible 1.25G DWDM SFP Optical Transceiver | 1000BASE‑DWDM 1556.55nm 80km Bulk Wholesale

Product Overview

HYTOPTODEVICE 1.25G C26 DWDM SFP optical module is fully pin-to-pin compatible with Cisco DWDM‑SFP‑5655‑80. It adopts standard 100GHz ITU-T grid and 1556.55nm fixed wavelength, supporting stable 80km long-distance transmission over G.652.D/OS2 single-mode fiber for dense DWDM multiplexing systems.
Equipped with industrial-grade Cooled DFB (TEC) transmitter and PIN receiver, the module delivers high-precision wavelength locking. It effectively suppresses wavelength drift and adjacent channel crosstalk in compact 100GHz DWDM channels, with power consumption strictly controlled below 2W for reliable 24/7 full-load operation.
Custom pre-flashed EEPROM enables zero-alarm plug-and-play on Cisco switches and routers. Supporting hot-swap installation and complete SFF-8472 DDM real-time monitoring, this module is ideal for carrier metro ring construction, remote wireless base station backhaul and enterprise network bandwidth upgrade.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-5655-80 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1556.55nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type PIN
TX Power 0~+5dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤2W Receiver Overload -3.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 10–15 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -3 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a PIN receiver (sensitivity ~ -24 dBm, 24 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Custom Cisco‑specific EEPROM signature eliminates alarms and port lockdown. No extra configuration or firmware upgrade is required for plug‑and‑play deployment across supported Cisco enterprise and carrier‑grade hardware.

Fully Compatible Cisco Platforms:
  • Cisco Catalyst 3850, 9200, 9300 Series enterprise switches
  • Cisco ISR 4000‑series multi‑service branch routers
  • Cisco ASR 1000‑series carrier backbone routers
  • Cisco ONS optical transport platforms supporting 100GHz DWDM SFP
  • All Cisco devices accepting original DWDM‑SFP‑5655‑80 transceivers

2. Multi-Brand Cross Compatibility

Compliant with universal SFP MSA specifications, this C26 DWDM SFP runs error‑free on Huawei, H3C, Juniper, MikroTik and other mainstream network hardware. Custom firmware adaptation is available for complex multi‑vendor DWDM environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

  • Metro DWDM Ring Networking: Standard C26 100GHz wavelength supports single-fiber multiplexing. It saves fiber resources for carrier metro backbone deployment and network expansion.
  • ISP Base Station Backhaul: Supports 80km passive long-distance transmission. It eliminates extra amplification equipment and cuts ISP operation costs.
  • Enterprise Cross-Branch Connection: Builds stable low-cost private optical links. It supports cross-region data synchronization and video conference transmission.
  • MAN Access Aggregation: Provides independent wavelength service isolation. It effectively avoids network congestion and improves MAN operation stability.
  • Industrial & IoT Transmission: Features excellent anti-interference capability. It guarantees stable 80km signal transmission for industrial and smart city monitoring.
  • Legacy Network Upgrade: Supplements exclusive C-band DWDM channels. It enables low-cost multi-service multiplexing and bandwidth expansion for old fiber networks.

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Matches standard DWDM MUX/DEMUX devices, utilizing independent C26 1556.55nm wavelength for single-fiber multi-service multiplexing. It simplifies wiring and delivers stable gigabit transmission for medium and short-distance networking.



2. 80km Long-Haul DWDM Solution

Integrates EDFA amplification, DWDM multiplexing and managed chassis design. It compensates long-span fiber loss, stabilizes C26 wavelength signal, and adapts to carrier metro backhaul and ultra-long cross-regional transmission.


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Ultra-low power design reduces power consumption and heat generation. The optimized single-fiber structure simplifies data center cabling, enabling cost-effective and stable gigabit Ethernet transmission.

1G Data Center Connectivity low power single-fiber Gigabit Ethernet DWDM SFP solution


2.
Verified Host Interoperability for Cisco Devices

Calibrated firmware supports zero-alarm plug-and-play for Huawei, Cisco and other mainstream devices. It solves multi-brand compatibility problems and adapts to hybrid network deployment.
Verified multi-vendor interoperability for  Cisco  DWDM SFP transceiver

3.Rigorous Testing, Uncompromising Reliability

Integrating precise wavelength locking, stable 80km long-haul transmission and multi-scenario adaptability, this module forms a complete gigabit DWDM solution. It fully meets diversified networking demands for carrier metro backhaul and enterprise long-distance interconnection.

Comprehensive 1.25G 80km C17 DWDM networking solution for carrier and enterprise deployment


FAQ

Q1: How to confirm compatibility of HYTOPTODEVICE C26 1556.55nm 80km DWDM SFP with my network devices?
A: HYTOPTODEVICE C26 1.25G 100GHz DWDM SFP is pre-programmed for zero-alarm compatibility with Cisco switches and routers. It complies with universal SFP MSA standards, supporting seamless interoperability with Huawei, H3C, Juniper and other mainstream devices. Match the 1556.55nm wavelength, 80km reach and 1.25G rate with your device’s transceiver list for quick verification.

Q2: How to fix "Unsupported Transceiver" error for HYTOPTODEVICE Cisco compatible DWDM SFP module?
A: HYTOPTODEVICE Cisco-tailored firmware rarely causes recognition errors. If the unsupported transceiver alarm pops up, update your device firmware first, then enable the third-party transceiver allow mode on network devices. The adaptive EEPROM design eliminates port block and alarm issues for stable deployment.

Q3: Can HYTOPTODEVICE C26 80km DWDM transceiver be reprogrammed for new network hardware?
A: Yes. This HYTOPTODEVICE 1556.55nm 100GHz DWDM SFP supports EEPROM reprogramming. It can be re-flashed with vendor-specific firmware to adapt to different brand network equipment, realizing flexible reuse and lowering network upgrade costs.

Q4: Are HYTOPTODEVICE 1.25G 80km DWDM SFP transceivers MSA and SFF-8472 compliant?
A: All HYTOPTODEVICE Cisco compatible DWDM modules fully comply with SFP MSA and SFF-8472 industry standards. Uniform mechanical size, pin definition, optical parameters and DDM functions ensure universal compatibility with all standard network devices.

Q5: Can HYTOPTODEVICE C26 1556.55nm DWDM SFP reach 80km stable transmission in real scenarios?
A: Yes. This HYTOPTODEVICE 80km long-haul DWDM transceiver delivers stable error-free transmission up to 80km over standard G.652.D single-mode fiber. Extra fiber splices, connectors or aging fiber will slightly reduce transmission distance under actual working conditions.

Q6: How does HYTOPTODEVICE C26 DWDM module handle optical power loss caused by fiber aging?
A: This carrier-grade HYTOPTODEVICE 100GHz DWDM SFP features sufficient link power margin to resist normal signal attenuation from fiber aging, avoiding packet loss and link dropout. Severe power decay can be fixed by cleaning fiber end faces or adding EDFA signal amplifiers.

Q7: How to test signal quality of installed HYTOPTODEVICE 1.25G 80km DWDM SFP transceiver?
A: Verify signal quality via the module’s built-in DDM monitoring function. Check real-time TX/RX optical power, bit error rate and packet loss status. Stable power readings and zero packet loss confirm reliable long-term signal transmission of the HYTOPTODEVICE C26 DWDM module.

Q8: Why and how to install 10-15dBm attenuator for HYTOPTODEVICE 80km DWDM SFP short-distance testing?
A: HYTOPTODEVICE C26 1556.55nm 80km DWDM SFP features high TEC laser transmit power. For short-link testing within 15km, installing a 10-15dBm fixed optical attenuator is mandatory. It effectively reduces excessive optical power, avoids receiver saturation, bit errors and port burnout, ensuring safe and stable short-distance debugging and testing of the 1.25G 100GHz long-haul DWDM module.

Q9: How to resolve over-limit received power for HYTOPTODEVICE C26 1556.55nm DWDM transceiver?
A: Excessive received power causes link instability and bit errors for 100GHz DWDM modules. Match a standard DWDM fixed attenuator to adjust optical power to the normal range, then confirm DDM data to ensure stable operation of the HYTOPTODEVICE DWDM SFP module.

Q10: Can HYTOPTODEVICE C26 DWDM SFP work in outdoor and industrial harsh temperatures?
A: This HYTOPTODEVICE commercial-grade 1.25G DWDM transceiver supports 0°C–70°C operation, ideal for indoor data centers and computer rooms. For outdoor and harsh industrial high/low temperature scenarios, industrial-grade wide-temperature DWDM modules are recommended.

Q11: Does HYTOPTODEVICE Cisco compatible 80km DWDM SFP support DDM/DOM monitoring?
A: Yes. HYTOPTODEVICE C26 1556.55nm 100GHz DWDM SFP fully supports SFF-8472 DDM/DOM real-time monitoring. It tracks transmit/receive power, temperature and voltage remotely for efficient link maintenance and fault pre-warning.

Q12: How accurate is DDM optical power reading of HYTOPTODEVICE 1.25G long-haul DWDM module?
A: This HYTOPTODEVICE DWDM transceiver adopts high-precision monitoring chips, with DDM power reading accuracy within ±1dB. It meets international industry standards, providing reliable data for daily network monitoring, troubleshooting and routine maintenance.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download