• hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Cisco C20 DWDM‑SFP‑6142‑80 Compatible 1.25G DWDM SFP Transceiver | 1000BASE-DWDM 1561.42nm 80km 100GHz | HYTOPTODEVICE

Factory direct sale Cisco C20 DWDM‑SFP‑6142‑80 compatible transceiver. 1.25G 1561.42nm 100GHz grid, 80km long-haul transmission. Adopts Cooled DFB(TEC) and PIN receiver, low power consumption below 2W. Zero-alarm for Cisco devices, full DDM support for carrier and enterprise DWDM networking.
CH P/N CH P/N
C17 DWDM‑SFP‑6386‑80 C27 DWDM‑SFP‑5575‑80
C18 DWDM‑SFP‑6305‑80 C28 DWDM‑SFP‑5494‑80
C19 DWDM‑SFP‑6223‑80 C29 DWDM‑SFP‑5413‑80
C20 DWDM‑SFP‑6142‑80 C30 DWDM‑SFP‑5333‑80
C21 DWDM‑SFP‑6061‑80 C31 DWDM‑SFP‑5252‑80
C22 DWDM‑SFP‑5979‑80 C32 DWDM‑SFP‑5172‑80
C23 DWDM‑SFP‑5898‑80 C33 DWDM‑SFP‑5092‑80
C24 DWDM‑SFP‑5817‑80 C34 DWDM‑SFP‑5012‑80
C25 DWDM‑SFP‑5736‑80  C35 DWDM‑SFP‑4932‑80
C26 DWDM‑SFP‑5655‑80  C36 DWDM‑SFP‑4851‑80
Description

Cisco C20 DWDM‑SFP‑6142‑80 Compatible 1.25G DWDM SFP Transceiver | 1000BASE‑DWDM 1561.42nm 80km Bulk Wholesale

Product Overview

This 1.25G C20 DWDM SFP module is fully pin-to-pin compatible with Cisco original DWDM‑SFP‑6142‑80. It adopts standard ITU-T 100GHz grid, fixed 1561.42nm wavelength, supporting 80km stable transmission over G.652.D/OS2 single-mode fiber.
Equipped with industrial-grade Cooled DFB (TEC) transmitter and PIN receiver, the module achieves active temperature control and ultra-precise wavelength locking. It effectively avoids adjacent channel crosstalk, ensuring stable operation in dense 100GHz DWDM multiplexing systems. Overall power consumption is controlled below 2W.
Custom pre-flashed EEPROM enables zero-alarm plug-and-play on Cisco devices. It supports hot-swap and real-time DDM monitoring, ideal for large-scale DWDM network deployment.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-6142-80 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1561.42nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type PIN
TX Power 0~+5dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤2W Receiver Overload -3.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 10–15 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -3 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a PIN receiver (sensitivity ~ -24 dBm, 24 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Custom Cisco‑specific EEPROM signature eliminates alarms and port lockdown. No extra configuration or firmware upgrade is required for plug‑and‑play deployment across supported Cisco enterprise and carrier‑grade hardware.

Fully Compatible Cisco Platforms:
  • Cisco Catalyst 3850, 9200, 9300 Series enterprise switches
  • Cisco ISR 4000‑series multi‑service branch routers
  • Cisco ASR 1000‑series carrier backbone routers
  • Cisco ONS optical transport platforms supporting 100GHz DWDM SFP
  • All Cisco devices accepting original DWDM‑SFP‑6142‑80 transceivers

2. Multi-Brand Cross Compatibility

Compliant with universal SFP MSA specifications, this C20 DWDM SFP runs error‑free on Huawei, H3C, Juniper, MikroTik and other mainstream network hardware. Custom firmware adaptation is available for complex multi‑vendor DWDM environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

  • Metro DWDM Ring Networking: Standard C20 100GHz wavelength supports single-fiber multiplexing. It saves fiber resources for carrier metro backbone deployment and network expansion.
  • ISP Base Station Backhaul: Supports 80km passive long-distance transmission. It eliminates extra amplification equipment and cuts ISP operation costs.
  • Enterprise Cross-Branch Connection: Builds stable low-cost private optical links. It supports cross-region data synchronization and video conference transmission.
  • MAN Access Aggregation: Provides independent wavelength service isolation. It effectively avoids network congestion and improves MAN operation stability.
  • Industrial & IoT Transmission: Features excellent anti-interference capability. It guarantees stable 80km signal transmission for industrial and smart city monitoring.
  • Legacy Network Upgrade: Supplements exclusive C-band DWDM channels. It enables low-cost multi-service multiplexing and bandwidth expansion for old fiber networks.

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Matches standard DWDM MUX/DEMUX devices, utilizing independent C20 1561.42nm wavelength for single-fiber multi-service multiplexing. It simplifies wiring and delivers stable gigabit transmission for medium and short-distance networking.



2. 80km Long-Haul DWDM Solution

Integrates EDFA amplification, DWDM multiplexing and managed chassis design. It compensates long-span fiber loss, stabilizes C20 wavelength signal, and adapts to carrier metro backhaul and ultra-long cross-regional transmission.


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Ultra-low power design reduces power consumption and heat generation. The optimized single-fiber structure simplifies data center cabling, enabling cost-effective and stable gigabit Ethernet transmission.

1G Data Center Connectivity low power single-fiber Gigabit Ethernet DWDM SFP solution


2.
Verified Host Interoperability for Cisco Devices

Calibrated firmware supports zero-alarm plug-and-play for Huawei, Cisco and other mainstream devices. It solves multi-brand compatibility problems and adapts to hybrid network deployment.
Verified multi-vendor interoperability for  Cisco  DWDM SFP transceiver

3.Rigorous Testing, Uncompromising Reliability

Integrating precise wavelength locking, stable 80km long-haul transmission and multi-scenario adaptability, this module forms a complete gigabit DWDM solution. It fully meets diversified networking demands for carrier metro backhaul and enterprise long-distance interconnection.

Comprehensive 1.25G 80km C17 DWDM networking solution for carrier and enterprise deployment


FAQ
 
Q1: Why are attenuators required for short-distance deployment of 80km DWDM modules?
A: 80km-grade DWDM modules adopt high-power Cooled DFB-TEC lasers for long-distance loss compensation. Excessive optical power on links under 15km will saturate the receiver, causing bit errors and link instability.

Q2: What core optical components does this C20 module use?
A: It adopts high-precision Cooled DFB (TEC) transmitter and PIN receiver. Built-in active temperature control locks wavelength accurately, effectively preventing crosstalk in 100GHz dense DWDM systems.

Q3: What fiber is suitable for 80km transmission?
A: G.652.D/OS2 low-loss single-mode fiber is required. Ordinary fiber with high attenuation will consume link budget and cause unstable long-haul transmission.

Q4: Is multi-vendor device compatibility supported?
A: Yes. It complies with universal SFP MSA standards. Custom adaptive firmware ensures alarm-free operation on Cisco, Huawei, H3C and other mainstream network devices.

Q5: What is the power consumption of this module?
A: Adopting optimized hardware and circuit design with Cooled DFB and PIN chipset, the overall power consumption is less than 2W, supporting 24/7 full-load stable operation.

Q6: How does temperature affect 100GHz DWDM wavelength performance?
A: Laser wavelength drifts around 0.1nm/°C with temperature changes. Narrow 100GHz channel spacing is sensitive to drift. The built-in TEC system stabilizes wavelength effectively. Operating beyond 0°C–70°C will cause wavelength offset and increased bit error rate.

Q7: Can EDFA amplifiers extend the transmission distance?
A: Yes. The C20 1561.42nm wavelength falls in the standard C-band amplification range. Reasonable OSNR calculation is necessary when adding EDFA to avoid signal degradation.

Q8: Does the module support real-time monitoring?
A: It fully supports SFF-8472 DDM real-time monitoring. Users can remotely check transmit/receive power, temperature and voltage for real-time link diagnosis and early fault warning.
Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download