HYTOPTODEVICE Ciena XCVR-S40U33 Compatible SFP+ 10G BiDi 40KM Transceiver – Simplex LC Single-Fiber BiDi 10G 40KM Single-Mode Optic, Ciena OS Certified Drop-In Replacement, Bulk Wholesale
Product Overview
Our HYTOPTODEVICE Ciena XCVR-S40U33 Compatible SFP+ 10G BiDi 40km transceiver is single strand 10G SFP+ transceiver, built for 40km point-to-point transmission over single strand OS2 single mode fiber.
• Wavelength: Tx1330nm/Rx1270nm (Match Ciena XCVR-S40U27 standard BiDi pairing)
• Interface: Standard LC simplex connector
• Transmission Distance: Stable 40km @10Gbps SMF OS2
Compliant with Hot-Pluggable SFP+ MSA, SFF-8472,SFP-8431, IEEE 802.3ae and RoHS standards and fully DDM/DOM support, Delivering high-speed performance with optimized power efficiency, this single-strand SFP+ 10G BiDi 40km transceiver is the ideal solution for cross-campus backbones, metropolitan area network (MAN) rings, and long-range data center interconnects (DCI). We support samples, bulk wholesale and OEM private labeling, submit bulk inquiry or RFQ for competitive pricing and long-term supply contracts.
Key Technical Specifications
The SFP+ 10G BiDi 40KM Transceiver is manufactured and calibrated per Ciena XCVR-S40U33, SFP+ MSA and IEEE 802.3ae standards. Strict optical, electrical and compatibility tests ensure consistent low-BER 40km simplex transmission for indoor commercial Ciena transport devices. All critical parameters are listed in the specification table for carrier deployment reference.
| Ciena Compatible |
XCVR-S40U33 |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ |
Max Data Rate |
10.7Gbps |
| Wavelength |
TX1330nm/RX1270nm |
Max Distance |
40km |
| Connector |
Simplex LC |
Transmitter Type |
1330nm DFB |
| Cable Type |
SMF |
Receiver Type |
PIN |
| TX Power |
-1.0~+5dBm |
Receiver Sensitivity |
< -15dBm |
| Max. Power Consumption |
≤1W |
DOM/DDM |
Fully Supported |
| Protocols |
SFP+ MSA, SFF-8472, IEEE 802.3ae, RoHS Compliant |
Operation Temperature |
0 to 70°C (32 to 158°F) |
Pairing Guidance
This SFP+ 10G BiDi 40KM transceiver must pair with complementary XCVR-S40U27 (1270nm-TX / 1330nm-RX) modules to build full-duplex single-fiber links. We offer exclusive bundled discounts for paired bulk orders; customized 10km/20km/60km BiDi variants are available via OEM bulk order quote request.
The Required Matched Pairs here: 10G SFP+ BiDi Tx 1270nm / Rx 1330nm 40km module
Full Compatibility List & Supported Network Hardware
1.Native Ciena OS Compatibility
Each factory-calibrated SFP+ 10G BiDi 40KM Transceiver passes real-machine testing on official Ciena OS. Preloaded Ciena-adapted firmware delivers zero recognition failures, no transceiver alarms and complete DDM data display. Direct swap for Ciena XCVR-S40U33 without extra configuration for metro and enterprise transport projects.
Compatible Ciena Device Series:
- Ciena 3900 Series Metro Packet Transport Platforms
- Ciena 5100 Series Edge Aggregation Switches
- Ciena Cross-Campus Core-to-Access 40km Single-Fiber Interconnection Equipment
- Ciena Enterprise Access Long-Reach Trunk Hardware
2.Multi-Brand Cross Compatibility
Built to universal SFP+ MSA standards, HYTOPTODEVICE’s Ciena-compatible SFP+ 10G BiDi 40KM Transceiver unlocks OEM vendor lock-in for hybrid multi-vendor metro networks.
- Open-Brand (Plug-and-Play): Fortinet, Ubiquiti, MikroTik, D-Link, Zyxel and other open switches
- Locked-Brand (Custom Coding): Cisco, H3C, Huawei, Dell, Juniper and more
3.Free Custom EEPROM Re-Flash Service
Complimentary permanent EEPROM rewrite for all bulk orders of SFP+ 10G BiDi 40KM Transceiver. Upgrade Ciena OS or migrate modules to other brand racks; our team re-codes firmware free of charge to maintain stable 40km single-fiber bidirectional links for evolving multi-vendor metro architectures.
Primary Application Scenarios
Optimized for 40km simplex single-mode transmission and commercial indoor cabinet environments, the SFP+ 10G BiDi 40KM Transceiver matches Ciena XCVR-S40U33 optical and OS specs with low BER and stable WDM separation. Widely applied in:
- Bulk replacement of aging Ciena XCVR-S40U33 for metro 40km single-fiber aggregation links
- Ciena metro core network upgrade with fiber-saving commercial temperature SFP+ 10G BiDi 40KM Transceiver
- Enterprise cross-building point-to-point trunk with simplex single-fiber long-reach transmission
- Campus edge bandwidth expansion using low-jitter single-fiber BiDi optics
- Custom coded modules for multi-vendor hybrid Ciena core-to-access network integration
- Commercial carrier cabinet transformation with single-fiber long-haul BiDi transceivers
Connectivity Solutions(Applications)
1.Switch-to-Switch
Build stable 40km single-fiber 10G aggregation trunk links between Ciena core switches with SFP+ 10G BiDi 40KM Transceiver.
2.Switch-to-NIC
Enable long-distance single-fiber 10G uplinks from Ciena switches to server NICs for stable remote endpoint access.

3.Core to Access (With Structured Cabling)
Adapts standard structured cabling to realize reliable core-to-access long-haul interconnection, extending 10G coverage for layered Ciena network architecture.

Features | Maximized Fiber Utilization
Maximized Fiber Utilization Commercial Temperature SFP+ 10G BiDi 40KM Transceiver
This commercial temperature SFP+ 10G BiDi 40KM Transceiver achieves bidirectional 10G transmission via a single fiber strand. Replacing traditional dual-fiber cabling layouts, it significantly boosts existing fiber utilization, saves 50% physical fiber resources, and delivers cost-efficient stable 40km long-reach links for layered Ciena metro core-to-access network construction. Compact SFP+ form factor, low power consumption and hot-swappable design simplify field deployment and lower long-term cabinet OPEX.

FAQ
Q1: Can I build a temporary short-range link by installing two identical 1330nm BiDi transceivers on both fiber ends?
A: Deploying matching wavelength modules on two ends cannot establish valid bidirectional data transmission. Same-band signals interfere mutually and block all optical communication completely. HYTOPTODEVICE wavelength-paired SFP+ 10G BiDi 40KM Transceiver adopts matched TX/RX band design to avoid wrong-pairing failures for temporary site interconnection.
Q2: What makes field installers frequently misconfigure BiDi transceivers during on-site deployment?
A: Generic BiDi hardware comes with miniature pull tabs and faint printed labels without color differentiation, leading to frequent wavelength mix-ups during rapid cabinet wiring. HYTOPTODEVICE color-tagged SFP+ 10G BiDi 40KM Transceiver features obvious visual identifiers to reduce field installation errors for Ciena network rollouts.
Q3: Can 40km BiDi transceivers sustain stable operation after fiber rerouting extends the total span to 42km?
A: 40km-rated BiDi optics carry a fixed maximum optical power budget with no extra tolerance for over-distance fiber layout. Any span exceeding the rated limit will trigger intermittent disconnection and unstable traffic. HYTOPTODEVICE power-budget calibrated SFP+ 10G BiDi 40KM Transceiver supports precise distance planning for construction-adjusted fiber routes.
Q4: Why does inserting an extra intermediate patch panel instantly cut off the whole BiDi long-distance link?
A: Long-reach 40km BiDi links hold minimal loss tolerance. Additional connectors, patch panels or imperfect fusion splices accumulate insertion loss and exhaust the limited power margin in one go. HYTOPTODEVICE low-loss interface SFP+ 10G BiDi 40KM Transceiver reserves extra loss headroom for multi-section structured cabling layouts.
Q5: How does a single damaged fiber core disable the whole backhaul ring network built with BiDi modules?
A: BiDi single-fiber technology merges upload and download service streams onto one fiber strand, eliminating spare physical fiber paths for fast failover. Any single fiber fault will take the entire ring offline without backup channels. HYTOPTODEVICE ring-network adaptable SFP+ 10G BiDi 40KM Transceiver helps engineers design supplementary redundant fiber architectures for core backhaul systems.
Q6: Why do 40km BiDi transceivers fail to run smoothly on legacy G.652 fiber that works flawlessly with standard 10G LR modules?
A: Older G.652 fiber generates strong water peak attenuation near the BiDi 1270/1330nm spectrum bands, creating extra per-kilometer signal loss that ordinary dual-fiber LR optics do not encounter. HYTOPTODEVICE attenuation-resistant SFP+ 10G BiDi 40KM Transceiver improves signal stability for aged single-mode fiber infrastructure upgrades.
Q7: Why do receiver error alarms pop up when testing 40km BiDi modules over a short 2km fiber jumper?
A: High-output lasers built into 40km BiDi transceivers deliver excessive optical power for short spans. Without inline attenuators, the strong light will oversaturate the receiving chip and trigger persistent hardware fault alerts. HYTOPTODEVICE high-power laser SFP+ 10G BiDi 40KM Transceiver requires matched attenuator accessories for short-distance lab testing scenarios.
Q8: Which hardware flaw creates continuous crosstalk alarms inside Ciena switch chassis loaded with BiDi modules?
A: Low-cost generic BiDi transceivers utilize poorly isolated WDM diplexer chips. Internal laser transmit signals leak across channels and disrupt adjacent receiving ports, generating constant crosstalk errors. HYTOPTODEVICE high-isolation diplexer SFP+ 10G BiDi 40KM Transceiver eliminates cross-channel signal leakage for high-density switch port deployment.
Q9: What causes noticeable increases in data center cooling overhead after migrating long-haul links to 40km BiDi optics?
A: Long-reach BiDi transceivers operate high-power laser components that produce more thermal output than regular short-range pluggables. Mass port deployment raises overall cabinet temperature and forces HVAC systems to consume extra power. HYTOPTODEVICE low-heat dissipation SFP+ 10G BiDi 40KM Transceiver lowers total thermal load to cut facility cooling expenses.
Q10: Local DDM telemetry shows normal transmit power, yet the remote transceiver receives zero optical signals — what is the root cause?
A: Onboard DDM sensors only monitor local laser output status and cannot detect fiber breakage, severe mid-span loss or reverse optical reflections along the fiber route. Hidden line faults will create mismatched local/remote optical readings. HYTOPTODEVICE full-spectrum DDM-monitored SFP+ 10G BiDi 40KM Transceiver supplies comprehensive optical data to accelerate end-to-end fiber fault troubleshooting.
Q11: Why does the built-in DDM diagnostic function stop displaying valid data after updating Ciena switch firmware?
A: System OS upgrades rewrite the internal register reading logic for third-party pluggable transceivers. Most unoptimized BiDi modules carry non-standard register tables, resulting in incomplete or scrambled diagnostic telemetry post-upgrade. HYTOPTODEVICE register-matched SFP+ 10G BiDi 40KM Transceiver retains full DDM visibility through all official switch firmware iterations.
Q12: Why does the total capital expenditure for 10G network expansion double the original budget when adopting 40km BiDi transceivers?
A: Specialized WDM diplexer chips and high-output long-reach lasers add significant component costs to BiDi hardware compared with conventional dual-fiber 10G LR transceivers. Dual wavelength stocking requirements also inflate overall procurement spending. HYTOPTODEVICE cost-optimized SFP+ 10G BiDi 40KM Transceiver balances performance and budget for large-scale enterprise network expansion projects.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


