• source third-party compatible QSFP-40G-LR4 replacement module from hytoptodevice
  • 40GBASE-LR4 10km duplex LC SMF transceiver from hytoptodevice
  • hytoptodevice compatible 40GBASE-LR4 10km duplex LC SMF transceiver module
  • Custom CWDM4 QSFP+ 40G LR4 optical module manufacturer for data center project procurement
  • source third-party compatible QSFP-40G-LR4 replacement module from hytoptodevice
  • 40GBASE-LR4 10km duplex LC SMF transceiver from hytoptodevice
  • hytoptodevice compatible 40GBASE-LR4 10km duplex LC SMF transceiver module
  • Custom CWDM4 QSFP+ 40G LR4 optical module manufacturer for data center project procurement

Brocade 40G-QSFP-LR4  Compatible QSFP+ 40G LR4 Transceiver Module | 40GBASE-LR4 1310nm(CWDM4)10km Duplex LC SMF Bulk Wholesale

Shop Brocade 40G-QSFP-LR4 compatible QSFP+ 40G LR4 transceiver from HYTOPTODEVICE manufacturer. This 40GBASE-LR4 CWDM4 optic reaches 10km over OS2 single mode fiber with duplex LC interface. Bulk orders available, custom EEPROM coding, ideal replacement for Brocade Fabric OS switches.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QSFP-40G-LR4
2 APRESIA  H-LR4-QSFP+
3 Alcatel-Lucent  QSFP-40G-LR 
4 Arista Networks  QSFP-40G-LR4
5 Brocade  40G-QSFP-LR4 
6 Cisco Meraki  MA-QSFP-40G-LR4
7 D-Link  DEM-QX10Q-LR4 
8 DELL  QSFP-40G-LR4
9 Extreme  10320
10 Gigamon  QSF-503 





Description

Brocade 40G-QSFP-LR4 Compatible QSFP+ 40G LR4 Transceiver Module | 40GBASE-LR4 1310nm(CWDM4)10km Duplex LC SMF Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE is a professional optical transceiver manufacturer and supplier offering Brocade 40G-QSFP-LR4 compatible QSFP+ 40G LR4 transceivers. Designed to comply with 40GBASE-LR4 CWDM4 standards at 1310nm wavelength band, this duplex LC optical module delivers stable 10km transmission over OS2 single-mode fiber. It serves system integrators, resellers and bulk purchasers for inter-building and inter-data-center 40G fiber links. Pre-programmed EEPROM profiles eliminate vendor lock transceiver alerts on Brocade hardware. It supports DDM real-time monitoring and hot swapping. We accept bulk purchases with flexible MOQ and custom EEPROM programming service.

Key Technical Specifications 

Brocade Compatible  40G-QSFP-LR4  Vendor Name HYTOPTODEVICE
Form Factor QSFP+ Max Data Rate 44.6Gbps (4x 11.2Gbps)
Wavelength 1310nm Max Distance 10km
Connector Duplex LC Transmitter Type DFB CWDM
Cable Type SMF Receiver Type PIN
TX Power -7.0~2.3dBm Receiver Sensitivity < -13.7dBm
Power Consumption ≤3.5W Modulation NRZ
Protocols OTN OTU3, 40G Ethernet, Fiber Channel, SATA/SAS3, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)


For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Choice: Works only with OS2 single-mode fiber. Multimode fiber is not compatible with this 1310nm CWDM4 module.

  • Distance Specification:Max 10km (OS2 SMF). Dirty end faces, excessive splicing and sharp bending reduce actual transmission distance.

  • Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Installation Specification: Hot-swap supported. Follow ESD anti-static procedures and keep LC connectors clean for stable links.

  • Mode Setting: Configure 40G port speed via switch CLI. This LR4 module does not support breakout to 4×10G.
  • Operating Environment: 0°C–70°C commercial temperature range. Ensure cabinet ventilation to avoid optical power attenuation from overheating.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices 

1. Supported Hardware & Firmware

Preloaded Brocade-specific EEPROM profiles enable seamless plug-and-play recognition, avoiding vendor lock alarms and unstable link issues. All modules undergo real-machine burn-in and temperature cycle validation for Brocade Fabric OS platforms.

Validated Platforms:

  • Brocade ICX 6650/7450/7750/8200/8400 enterprise and data center switch series
  • Brocade VDX 6730/6740/6750/8770 leaf-spine data center switches
  • All Brocade network hardware equipped with native 40GBASE-LR4 QSFP+ ports

2. Multi-Brand Cross Compatibility

Designed to open MSA mechanical and electrical specifications, this 40GBASE-LR4 transceiver supports multi-vendor interoperability. It works stably with Arista, Cisco, Juniper, NVIDIA, Palo Alto, H3C and other mainstream brands for hybrid data center fabric and cross-site network upgrade projects.

3. Free Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility
  • Sample testing available before bulk orders for project validation
  • Private label customization and professional deployment guides
  • Rigorous batch quality consistency control
  • Custom EEPROM configuration for special and legacy network setups
  • Free EEPROM recoding with 24/7 technical support


Primary Application Scenarios

  • Long-distance data center inter-site 40G uplink: Stable 10km single-mode fiber connections between separate data center buildings.
  • Enterprise campus long-haul backbone links: Cross-city or multi-building campus single-mode fiber transmission up to 10km.
  • 40G core aggregation uplink: TOR switch uplink to core switch for large enterprise backbone networks.
  • Brocade network hardware upgrade: Direct drop-in replacement for aging 40G-QSFP-LR4 40G transceivers.
  • Multi-vendor hybrid network bulk deployment: Mass rollout for integrator and wholesale infrastructure projects.

Connectivity Solutions(Applications) 


1.40GbE Switch-to-Switch Connectivity
hytoptodevice 40g qsfp+ lr4 transceiver module for switch to switch

2.40GbE Structured Cabling Interconnect

HYTOPTODEVICE compatible QSFP-40G-LR4 QSFP+ 40G LR4 optical transceiver for bulk data center projects

3.40GbE Switch-to-NIC Interconnection

40GBASE-LR4 QSFP+ 40G LR4 transceiver 1310nm CWDM4 duplex LC single mode fiber for switch

4.Leaf-Spine Architecture

leaf-spine architecture for 40g qsfp+ LR4 10KM TRANSCEIVER MODULE



The Core Feature

1. 40G QSFP+ Connectivity for High-Density Data Centers

Speed without the overhead. The QSFP+ 40G 10KM transceiver delivers full 40G throughput into dense data center racks — drawing less power and occupying less space than you'd expect. High speed, high density, without the trade-offs.

HYTOPTODEVICE 40GBASE-LR4 replacement transceiver for enterprise buyer, reseller stock replenishment


2.
100% Compatibility Verified. Zero-Risk Deployment.

Deploy with total confidence — every 40G QSFP+ LR4 module is rigorously compatibility-tested in the target switch environment before it ships, so your link-up is clean on the first try. No surprises. No downtime. Not sure it fits your switch? Watch our Compatibility Video.

HYTOPTODEVICE 100% COMPATIBLE 40G LR4 single mode optic

3.No Sampling. No Shortcuts. Every Unit Tested

While others rely on batch sampling, we test every single unit. Each QSFP+ LR4 transceiver is individually verified for optical compliance and continuous operational stability before it ships — so performance isn't a gamble, it's a guarantee. See the process yourself: take a virtual tour of our Test Center.

HYTOPTODEVICE 40G LR4 QSFP+ module comprehensive factory testing stable performance for various platforms bulk wholesale orders


FAQ 

1: Can HYTOPTODEVICE QSFP+ 40G LR4 transceiver run on my existing network switches including Cisco, Arista, Juniper and Huawei?

A: Yes, if the module carries the correct EEPROM coding for your switch brand. Share your switch model and firmware so we can confirm compatibility before shipment.

Q2: Is it possible to install this Brocade-compatible QSFP+ 40G LR4 module into a QSFP28 100G switch port?

A: Often yes, when the port supports 40G mode. Capability varies by platform, so confirm with your switch vendor first.

Q3: Can I pair this QSFP+ 40G LR4 transceiver with IR4 or ER4 optical modules at the opposite end of the fiber link?

A: LR4 interoperates with IR4 (link limited to 2 km, the shorter module) and with ER4 only if reach and loss fit the ER4 budget — check both ends' specs before mixing.

Q4: What is the maximum fiber distance achievable with HYTOPTODEVICE QSFP+ 40G LR4 optical transceiver?

A: 10 km over standard single-mode fiber per 40GBASE-LR4. For 2 km you could use the cheaper IR4; for 40 km you would need ER4.

Q5: What laser wavelength bands are implemented inside this Brocade compatible QSFP+ 40G LR4 transceiver?

A: Four CWDM lanes: 1271 nm, 1291 nm, 1311 nm, and 1331 nm, each carrying 10 Gbps for a total of 40 Gbps.

Q6: Can users split this HYTOPTODEVICE QSFP+ 40G LR4 transceiver into four independent 10G data connections?

A: Not passively. Each lane uses a different wavelength on the same fiber pair, so breakout requires CWDM mux/demux — an LR4 cannot fan out like an SR4.

Q7: Which physical fiber connector comes equipped on this QSFP+ 40G LR4 compatible transceiver?

A: A duplex LC connector on two single-mode fibers — no MPO, which simplifies cabling compared with SR4.

Q8: What do I need to know about fiber polarity when deploying duplex LC QSFP+ 40G LR4 modules?

A: Duplex LC uses simple A-to-B keying, so polarity errors are rare. The common mistake is swapping TX and RX on one end — always verify fiber orientation.

Q9: Should buyers select UPC or APC polished fiber patch cords to work with HYTOPTODEVICE 40G LR4 transceiver?

A: LR4 modules are UPC by standard. Keep patch cables and panels UPC; mixing UPC and APC causes reflection and loss.

Q10: Is this Brocade 40G-QSFP-LR4 replacement transceiver original OEM hardware or MSA-compliant compatible optic?

A: OEM modules carry the switch brand at a higher price. Compatible LR4 modules are built to the same MSA standard, functionally equivalent, and typically cost 60–80% less — with our own warranty.

Q11: What quality inspection and testing procedures does HYTOPTODEVICE run on every QSFP+ 40G LR4 before shipment?

A: Every module should be 100% tested: TX power and RX sensitivity on all four CWDM lanes, plus interoperability testing on major switch brands, with reports on request.

Q12: Will the optical performance of QSFP+ 40G LR4 transceiver degrade noticeably after long continuous runtime in data center racks?

A: Gradual per-lane aging is normal and monitorable. Sudden failures usually come from contamination, overheating, or ESD — not normal wear.

Q13: Why is HYTOPTODEVICE’s QSFP+ 40G LR4 transceiver priced lower than the official Brocade OEM optical modules?

A: We supply direct with no OEM brand premium or channel markup. Performance is equivalent for standard links — you pay for the brand, not the function.

Q14: What lead time can bulk buyers expect, and are these QSFP+ 40G LR4 modules kept in stock?

A: Popular standard QSFP+ 40G LR4 modules are in stock with fast 24–72h delivery; customized and industrial-grade versions take 5–8 days lead time for mass orders.

Q15: Does HYTOPTODEVICE offer sample testing support and discounted samples for pre-project compatibility validation?

A: HYTOPTODEVICE fully supports customer sample testing and strives to meet all pre-project verification requirements with favorable sample pricing. All sample fees can be deducted from the first bulk order, making it the ideal solution to confirm compatibility before large-scale deployment.

Packaging & Custom OEM Solutions

Every 40G QSFP+ LR4 module leaves our warehouse in sealed ESD-safe packaging, dispatched the same day your order is confirmed. For bulk orders, we tailor the full OEM package — logo printing and private labeling — built for network wholesaler,distributors, integrators, and enterprise deployments.
hytoptodevice cost‑effective 40G QSFP+ LR4 optical module with custom package


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • source third-party compatible QSFP-40G-LR4 replacement module from hytoptodevice
  • 40GBASE-LR4 10km duplex LC SMF transceiver from hytoptodevice
  • hytoptodevice compatible 40GBASE-LR4 10km duplex LC SMF transceiver module
  • Custom CWDM4 QSFP+ 40G LR4 optical module manufacturer for data center project procurement

Download