| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-25G-iER-S | |
| 2 | Cisco | SFP-25G-iER-S-I | |
| 3 | Arista Networks | SFP-25G-ER-Lite | |
| 4 | Arista Networks | SFP-25G-ER-Lite-I | |
| 5 | Brocade | 25G-SFP28-ER-Lite | |
| 6 | Brocade | 25G-SFP28-ER-Lite-I | |
| 7 | NVIDIA(Mellanox) | SFP28-25GER-31 |
| Arista Compatible | SFP-25G-ER-Lite | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP28 | Max Data Rate | 25Gbps |
| Wavelength | 1310nm | Max Distance | 30km |
| Connector | Duplex LC | Transmitter Type | DML 1310nm |
| Cable Type | SMF | Receiver Type | APD |
| TX Power | 0~+6dBm | Receiver Sensitivity | < -19dBm |
| Max. Power Consumption | ≤2.2W | Receiver Overload | -4dBm |
| Protocols | MSA Compliant, CPRI, eCPRI | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber Compatibility: Designed exclusively for G.652 OS2 single-mode fiber. Multimode fibers (OM3/OM4) or incompatible connector polish types (e.g., APC if the module requires UPC) will cause high attenuation and reduce transmission range.
Maintenance & Polarity: Clean LC optical connectors regularly before insertion. Dust and debris on the end face can lead to signal loss and degrade 25GBASE-ER 30KM module performance.
Distance & Link Budget: Supports up to a 30 km transmission distance within the standard optical power budget. Excessive fiber splices, patch panels, or sharp bends will shorten the usable range.
Port Compatibility Check: This optic only works on native 25G SFP28 ports. It can physically insert into SFP+ slots but will not negotiate 25G speed. Confirm your hardware or multi-vendor switch supports 25GBASE-LR standard before plugging in
Optical Attenuator Required for Short Links: For testing or short‑distance connections (<20km), connect a 10dB–15dB optical attenuator to the RX port to prevent damaging the receiver.(20KM<Distance<30km,connect 5‑10dB optical attenuator)
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1.Validated Arista Networks Hardware & Firmware
This high-performance 25G SFP28 ER Lite 30km optical transceiver features exclusive Arista-matched EEPROM coding, ensuring flawless plug-and-play recognition without unsupported transceiver warnings under Arista EOS firmware systems. Every finished module undergoes strict burn-in aging and multi-temperature stability testing before factory delivery to guarantee 100% compatibility with Arista devices:
2.Multi‑Brand Cross Interoperability
Features pre-programmed universal multi-vendor EEPROM compatibility based on MSA international standards. Rigorously tested and verified to deliver error-free signal transmission, stable long-distance link integrity and complete CLI identification across Cisco, Juniper, Dell, Brocade and other mainstream brand network devices.
3.Free Value-Added Services
Custom EEPROM programming for multi-platform compatibility
Pre-bulk sample testing for project validation
Private label customization and deployment guides
Strict batch quality control
EEPROM configuration for legacy network environments
Free EEPROM recoding plus 24/7 technical support
Primary Application Scenarios
• Metro & Long-Distance Backbone Transmission: Optimized for 30km long-span single-mode fiber links for cross-building, campus and metropolitan backbone networks.
• 5G Wireless Fronthaul & Backhaul: Delivers high-density, low-latency 25G optical links for 5G base station CPRI/eCPRI infrastructure.
• Data Center Interconnection: Suitable for long-distance rack uplinks, cross-building interconnection and leaf-spine network architecture.
• Enterprise & Smart City Infrastructure: Long-haul fiber trunk upgrades for smart grid, municipal surveillance and campus private networks.
• Wholesale & OEM Procurement: Reliable bulk supply for distributors, VARs and system integration projects.



The Core Features
1. Low Power & High Port Density

2. Host Validated for Reliable Interoperability
Pre-flashed EEPROM matching target SFP28 25G ER specs, plug and play without unsupported transceiver warnings and saves site debugging time.Specific Compatibility Video available upon request.


Q1: Does the transceiver use a genuine DML laser optimized for 1310nm optical transmission? A: YES. This HYTOPTODEVICE Arista compatible 25G SFP28 ER Lite transceiver uses genuine industry-grade DML laser tuned for 1310nm transmission, paired with high-performance APD receiver to hit our specs of 0~+6dBm Tx power, -19dBm sensitivity and -4dBm overload for reliable 30km fiber links.
Q2: Is RS-FEC required on the host device to achieve the full 30km distance? A: YES. RS-FEC must be enabled on your Arista host switch to reach full 30km reach. FEC corrects bit errors introduced by fiber attenuation and dispersion, letting our HYTOPTODEVICE 25G ER Lite module maintain stable error-free transmission over the complete G.652 single-mode fiber span.
Q3: What is the exact optical power budget margin for a full 30km link? A: YES. The total optical budget of this HYTOPTODEVICE 25G SFP28 ER Lite module is 19dB, calculated from Tx 0~+6dBm and Rx sensitivity -19dBm, leaving adequate margin to cover fiber loss, splice loss and connector loss for 30km G.652 single-mode fiber deployment.
Q4: What is the maximum power consumption under full thermal stress? A: YES. The power consumption of this Arista compatible 25G ER Lite optic stays below 2.2W even under full thermal stress at 70℃. HYTOPTODEVICE low-power design reduces thermal buildup for high-density Arista switch port deployments.
Q5: How well does the optical engine handle dispersion over standard G.652 single-mode fiber? A: YES. Our top-tier DML+APD optical engine is optimized for G.652 SMF chromatic dispersion. The HYTOPTODEVICE 25G ER Lite transceiver suppresses dispersion-induced signal distortion to preserve clean 25.78Gbps NRZ signals across 30km fiber links.
Q6: Are protective optical dust caps supplied, and do they meet industrial handling standards? A: YES. Every HYTOPTODEVICE Arista compatible 25G SFP28 ER Lite transceiver ships with LC dust caps that meet industrial handling standards, shielding optical ports from dust and contamination during bulk shipment and field installation for system integrators.
Q7: Does the metal housing provide adequate EMI suppression in high-noise industrial settings? A: YES. The die-cast metal housing of this 25G ER Lite module delivers strong EMI shielding. It protects the high-speed signal path from electromagnetic interference in noisy industrial, metro and 5G fronthaul deployments for HYTOPTODEVICE bulk buyers.
Q8: What level of ESD protection is built into the electrical edge connector? A: YES. This HYTOPTODEVICE 25G SFP28 ER Lite module is built with 8kV contact ESD protection on the electrical edge connector. It prevents static damage during hot swap and field handling, a key requirement for wholesale network hardware integrators.
Q9: Is the EEPROM coded to bypass third-party optic blocking on Cisco, Juniper, Arista, or Nokia equipment? A: YES. HYTOPTODEVICE pre-programs customized EEPROM for this Arista SFP-25G-ER-Lite compatible transceiver. It bypasses third-party transceiver lock warnings on Arista, Cisco, Juniper and Nokia hardware for plug-and-play recognition without manual configuration.
Q10: Are real-time DOM parameters (Tx/Rx power, temperature, voltage, laser bias) accurately reported via SFF-8472? A: YES. Full DOM/DDM monitoring compliant with SFF-8472 is supported. This HYTOPTODEVICE 25G ER Lite module accurately streams Tx power, Rx power, temperature, supply voltage and laser bias data for real-time network monitoring on Arista EOS.
Q11: Can field technicians re-code or update firmware using standard programming devices? A: YES. Field technicians can re-program the EEPROM of this HYTOPTODEVICE 25G SFP28 ER Lite optic with standard SFP28 programming tools. This flexible feature supports custom branding and private label requests for distributors and bulk purchasers.
Q12: Is the module fully compliant with SFF-8402 and SFF-8432 mechanical and electrical standards? A: YES. This Arista compatible 25G ER Lite transceiver fully meets SFF-8402 and SFF-8432 mechanical and electrical MSA standards. It guarantees proper physical fit and stable electrical handshake inside Arista and multi-brand SFP28 switch ports.
Q13: Are internal warning and alarm thresholds calibrated to prevent false network management alerts? A: YES. HYTOPTODEVICE calibrates internal alarm thresholds during factory testing. This 25G ER Lite module avoids false alarms on Arista network management systems, reducing unnecessary trouble tickets for enterprise and carrier network operators.
Q14: Does the optic support pass-through for CPRI/eCPRI protocols used in 5G front haul alongside standard Ethernet? A: YES. This HYTOPTODEVICE 25G SFP28 ER Lite transceiver supports CPRI and eCPRI pass-through for 5G fronthaul applications together with standard 25G Ethernet. It is a versatile choice for mobile network system integrators and telecom wholesalers.
Q15: Is each module individually serialized and linked to factory optical test reports? A: YES. Every HYTOPTODEVICE 25G ER Lite transceiver gets a unique serial number tied to factory optical test records. Buyers can request full test reports and verification videos for quality audits during bulk procurement.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






