| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-4X10G-AOC3M | |
| 2 | Arista Networks | QSFP-4X10G-AOC3M | |
| 3 | Dell | CBL-QSFP-4X10G-AOC3M | |
| 4 | Juniper Networks | JNP-QSFP-AOCBO-3M | |
| 5 | Extreme | 10GB-4-F03-QSFP | |
| 6 | H3C | QSFP-4X10G-D-AOC-3M | |
| 7 | Brocade | 40G-QSFP-4SFP-AOC-0301 |
| Arista Compatible |
QSFP-4X10G-AOC3M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP+ to 4 SFP+ | Max Data Rate | 40Gbps |
| Operating Wavelength | 850nm | Fiber Cable | OM3 MMF |
| Cable Length | 3m (10ft) | Power Consumption | ≤1.4W |
| Jacket Material | OFNP | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Minimum Bend Radius | 30mm | Protocols | 10G/40Gigabit Ethernet or Fibre Channel |
| Application |
InfinibandQDR/DDR/SDR,40G Ethernet,Data Center,Fibre
Channel
|
Warranty | 5 Years |
Usage Guidelines & Best Practices
Mandatory Port Breakout Configuration: Ensure the host QSFP+ port supports channelization. Enable breakout mode (4x10G) via the switch CLI before connecting the cable.
Cabling Requirements: Do not exceed the minimum 30mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Do not mix this breakout AOC with straight QSFP+ to QSFP+ AOC configuration.
Hot‑swap rule:Never pull or tug directly on the individual breakout legs. Always use the integrated pull-tab or bale latch when inserting or removing connectors.
Operating Environment: 0‑70℃, indoor cabinet deployment only.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on MSA open standards, this arista 40g qsfp to four sfp+ active optical breakout cables supports mixed-vendor networking devices. can interoperate with mainstream network brands including Arista, Brocade, Juniper, Dell, H3C and Fortinet, for mixed-vendor rack stacking and server fabric expansion.




Q1: What is the maximum transmission distance supported by a 40G fanout AOC for data center inter-rack links? A: Breakout AOCs can deliver stable links ranging from 1m up to 100m when paired with OM3 or OM4 multimode fiber, making these arista 40g qsfp+ to four sfp+ breakout active optical cables ideal for inter-rack connections where copper DACs hit signal distance limits.
Q2: Are the split tails of breakout AOC flexible enough for tight cable management channels? A: Yes, each breakout leg features a slim outer diameter of 2mm to 3mm. The soft fiber structure makes routing far simpler than bulky copper breakout cables inside packed cable trays.
Q3: Can this Arista compatible breakout AOC be deployed for outdoor connections between separate buildings? A: No. Standard data center AOCs are designed exclusively for indoor climate-controlled environments between 0°C and 70°C, without armored protection or waterproof coating for outdoor use.
Q4: Is this 3m breakout AOC suitable for linking network hardware across different floors inside a data center? A: It works if your required span is within the maximum 100m AOC reach. For permanent multi-floor cabling, structured fiber cabling with patch panels delivers better long-term reliability.
Q5: How to prevent unsupported transceiver error messages on Arista EOS switches with third-party breakout AOC? A: You need to select the Arista-coded EEPROM version at the time of purchase. Incorrect programming will trigger system warnings or stop breakout ports from forming valid Ethernet links.
Q6: Will Arista EOS firmware updates cause my compatible breakout AOC to stop working? A: High-quality MSA-compliant AOC chips normally withstand routine firmware upgrades. However, strict security-focused firmware releases may occasionally block third-party cables and optics.
Q7: Can I rewrite the cable EEPROM on-site if I later move these breakout links to non-Arista switches? A: On-site reprogramming is impossible without professional EEPROM writing hardware. You must confirm the target switch brand and coding requirement before placing bulk orders.
Q8: What configuration steps are required to split a 40G QSFP+ port into four independent 10G ports? A: Yes, dedicated CLI commands are required. You need to activate breakout or channelization mode on the Arista QSFP+ port before the four 10G SFP+ breakout channels can establish links.
Q9: Can each SFP+ breakout tail connect to different standalone switches separately? A: No. All four fanout branches share one main QSFP+ host connector and must connect to the same parent Arista switch with the breakout-enabled 40G port.
Q10: Does hot swapping this breakout AOC bring risks of switch crash or unexpected service outage? A: No. QSFP+ and SFP+ MSA standards support hot plug. You can insert or remove these arista 40g qsfp+ to four sfp+ breakout active optical cables while the switch remains powered on safely.
Q11: How does power consumption compare between active breakout AOC and passive copper breakout DAC? A: AOC integrates optical conversion circuits and lasers, consuming 1.5W to 3.5W per assembly. Passive copper breakout DAC has no active components and uses zero power.
Q12: What thermal risks exist when breakout AOC is installed in racks with poor airflow? A: It maintains stable performance within the rated 0°C–70°C range. Fully enclosed racks with no ventilation will trap heat and raise component temperature, hurting link stability.
Q13: How many insertion and removal cycles can the connector pull tab of this breakout AOC endure? A: The pull tabs are built for regular maintenance cycles, supporting roughly 50–100 plug-unplug operations. Pulling directly on the cable jacket instead of the latch will damage the connector.
Q14: In which scenario is passive copper breakout DAC a better choice than 40G fanout AOC? A: Pick copper breakout DAC for links under 5 meters. DACs cost less, consume no power and offer stronger physical toughness for short intra-cabinet wiring.
Q15: What warranty coverage can buyers get for bulk orders of professional breakout AOC? A: Trusted networking suppliers generally provide 3-year to lifetime replacement warranty for commercial active optical breakout cables, and HYTOPTODEVICE provides warranty service for our arista 40g qsfp+ to four sfp+ breakout active optical cables.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.





