| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-4X10G-AOC1M | |
| 2 | Arista Networks | QSFP-4X10G-AOC1M | |
| 3 | Dell | CBL-QSFP-4X10G-AOC1M | |
| 4 | Juniper Networks | JNP-QSFP-AOCBO-1M | |
| 5 | Fortinet | FG-TRAN-QSFP-4XSFP | |
| 6 | H3C | QSFP-4X10G-D-AOC-1M | |
| 7 | Brocade | 40G-QSFP-4SFP-AOC-0101 |
| Arista Compatible |
QSFP-4X10G-AOC1M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP+ to 4 SFP+ | Max Data Rate | 40Gbps |
| Operating Wavelength | 850nm | Fiber Cable | OM3 MMF |
| Cable Length | 1m (3ft) | Power Consumption | ≤1.4W |
| Jacket Material | OFNP | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Minimum Bend Radius | 30mm | Protocols | 10G/40Gigabit Ethernet or Fibre Channel |
| Application |
InfinibandQDR/DDR/SDR,40G Ethernet,Data Center,Fibre
Channel
|
Warranty | 5 Years |
Usage Guidelines & Best Practices
Mandatory Port Breakout Configuration: Ensure the host QSFP+ port supports channelization. Enable breakout mode (4x10G) via the switch CLI before connecting the cable.
Cabling Requirements: Do not exceed the minimum 30mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Do not mix this breakout AOC with straight QSFP+ to QSFP+ AOC configuration.
Hot‑swap rule:Never pull or tug directly on the individual breakout legs. Always use the integrated pull-tab or bale latch when inserting or removing connectors.
Operating Environment: 0‑70℃, indoor cabinet deployment only.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on MSA open standards, this Arista qsfp to four sfp+ active optical breakout cables supports mixed-vendor networking devices. can interoperate with mainstream network brands including Cisco, Brocade, Juniper, Dell, H3C and Fortinet, for mixed-vendor rack stacking and server fabric expansion.




Q1: What transmission reach can you achieve with a 40G to 4x10G fanout AOC assembly? A: Breakout AOC solutions can run from 1m up to 100m using OM3 or OM4 multimode fiber, which makes this arista qsfp to four sfp+ active optical breakout cables ideal for inter-rack links where copper DACs suffer from signal attenuation.
Q2: Are fanout AOC pigtails easy to route inside crowded cable trays? A: Yes, each breakout leg has a slim outer diameter around 2mm to 3mm. The flexible fiber construction simplifies cable routing compared to bulky copper breakout cables for dense data center cable pathways.
Q3: Can I deploy this Arista compatible breakout AOC for outdoor cross-building fiber links? A: No, standard data center grade AOCs are designed only for indoor climate-controlled environments between 0°C and 70°C. They lack armor and weatherproof layers required for outdoor cabling.
Q4: Is this 40G breakout AOC suitable for connecting hardware across different data center floors? A: It works if your required span falls within the available AOC length options (max 100m). For multi-floor permanent links, structured fiber cabling with patch panels is a more reliable long-term solution.
Q5: How to avoid unsupported transceiver alerts when using third-party breakout AOC on Arista switches? A: You need to order the correct Arista-tuned EEPROM version at the time of purchase. Improper coding will trigger system alert messages or prevent the breakout ports from establishing stable Ethernet links.
Q6: Will Arista EOS firmware upgrades block my compatible breakout AOC unexpectedly? A: Quality MSA-based AOC EEPROM chips normally survive routine firmware updates. Still, major security-focused firmware releases from network vendors may occasionally restrict third-party optics and cables.
Q7: Can I reflash the cable EEPROM myself if I later migrate these breakout links to different brand switches? A: Field reprogramming is not possible without professional EEPROM writing hardware. It is critical to specify your target switch brand and coding requirements when placing your bulk breakout AOC order.
Q8: What switch configuration work is required to activate 4x10G breakout from a 40G QSFP+ port? A: Yes, manual CLI commands are mandatory. You need to enable channelization or breakout mode on the Arista QSFP+ port before the four 10G SFP+ breakout channels can come online.
Q9: Can I plug each of the four SFP+ breakout tails into separate independent switches? A: No. All four fanout branches share one main QSFP+ host connector. They must connect to the same parent Arista switch that hosts the breakout-enabled 40G port.
Q10: Does hot insertion of this 40G fanout AOC bring risk of switch reboot or downtime? A: No. QSFP+ and SFP+ specifications support hot-plug operation. You can insert or remove the arista qsfp to four sfp+ active optical breakout cables while the switch remains powered without crashing the system.
Q11: What is the power difference between active optical breakout cables and passive copper breakout DACs? A: AOC units contain optical conversion chips and lasers, so they draw power, typically 1.5W to 3.5W per unit. Passive copper breakout DACs have no active components and consume zero power at all.
Q12: What risk exists for breakout AOC deployed in racks with poor airflow? A: It stays stable within rated 0°C–70°C operating temperature range. If the rack is fully sealed with no ventilation, heat buildup can push component temperature higher and degrade link performance.
Q13: How many times can the latch pull tab of this breakout AOC withstand plugging and unplugging? A: The built-in pull tabs are engineered for routine maintenance cycles, supporting roughly 50–100 insertion cycles. Pulling force directly on the cable jacket instead of the latch will damage the connector structure.
Q14: Under what conditions is passive copper breakout DAC a better choice over 40G fanout AOC? A: Select copper breakout DAC for runs shorter than 5 meters. DACs carry lower cost, draw no power and offer stronger physical robustness for short intra-cabinet wiring jobs.
Q15: What warranty coverage can buyers expect for industrial-grade breakout AOC bulk orders? A: Trusted networking suppliers commonly provide 3-year to lifetime replacement warranty for professional active optical breakout cables, and HYTOPTODEVICE supports warranty service for our arista qsfp to four sfp+ active optical breakout cables.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




