| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | WSP-Q40GLR4L | |
| 2 | Arista Networks | QSFP-40G-LRL4 | |
| 3 | Brocade | 40G-QSFP-LR4L | |
| 4 | EdgeCore | ET6401-IR4 | |
| 5 | H3C | QSFP-40G-LR4L-WDM1300 | |
| 6 | HPE H3C | JL286A | |
| 7 | Huawei | QSFP-40G-LR4-Lite | |
| 8 | Juniper | JNP-QSFP-40GE-IR4 | |
| 9 | NVIDIA(Mellanox) | MC2210511-IR4 | |
| 10 | Palo Alto Networks | PAN-QSFP-40GBASE-LM4 |
| Arista Compatible | QSFP-40G-LRL4 | Vendor Name | HYTOPTODEVICE |
| Form Factor | QSFP+ | Max Data Rate | 41.2Gbps (4x 10.3Gbps) |
| Wavelength | 1310nm | Max Distance | 2km |
| Connector | Duplex LC | Transmitter Type | DFB CWDM |
| Cable Type | SMF | Receiver Type | PIN |
| TX Power | -7.0~2.3dBm | Receiver Sensitivity | < -11.5dBm |
| Power Consumption | ≤3.5W | Modulation | NRZ |
| Protocols | 40G Ethernet, Fibre Channel, SATA/SAS3, MSA Compliant | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber Choice: Works only with OS2 single-mode fiber. Multimode fiber is not compatible with this 1310nm CWDM4 module.
Distance Specification:Max 2km (OS2 SMF). Dirty end faces, excessive splicing and sharp bending reduce actual transmission distance.
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Installation Specification: Hot-swap supported. Follow ESD anti-static procedures and keep LC connectors clean for stable links.
Operating Environment: 0°C–70°C commercial temperature range. Ensure cabinet ventilation to avoid optical power attenuation from overheating.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
Pre-calibrated Arista dedicated EEPROM ensures plug-and-play recognition and avoids port rejection and link instability. All stocked modules pass real machine burn-in and temperature cycling tests for mainstream Arista data center switches.
Validated Platforms:
Primary Application Scenarios




1. 40G QSFP+ Connectivity for High-Density Data Centers
Speed without the overhead. The QSFP+ 40G transceiver delivers full 40G throughput into dense data center racks — while drawing less power and occupying less space than you'd expect.



FAQ
Q1: Will this Arista compatible QSFP+ 40G LRL4 transceiver fit my multi-brand switch hardware for data center projects?
A: Yes, if the module is programmed with the correct EEPROM coding for your switch brand. Provide your exact model and firmware version so HYTOPTODEVICE can confirm compatibility before shipping.
Q2: Can network distributors install this 40G LRL4 optic inside a QSFP28 100G port for existing infrastructure upgrades?
A: Often yes, when the port supports 40G speed mode. Verify the port's capability with your switch vendor first, as port flexibility varies by hardware platform.
Q3: Does this 40G LRL4 replacement optic require a firmware upgrade for Arista switch deployments by enterprise buyers?
A: Many switches recognize standards-compliant modules out of the box. Some OEM platforms need a minor firmware update or license to accept third-party optics from our manufacturer.
Q4: Can wholesalers pair our HYTOPTODEVICE 40G LRL4 transceiver with an LR4 module on the opposite fiber end for campus links?
A: Yes, LRL4 and LR4 use identical wavelengths and modulation formats for direct interoperability. The maximum link distance will be capped at the shorter 2km reach defined by the LRL4 standard.
Q5: What maximum fiber reach can project purchasers expect from this Arista QSFP-40G-LRL4 compatible transceiver?
A: This module supports 2 km transmission over single-mode fiber following the 40GBASE-LRL4 standard. Users requiring 10km connectivity will need to select a dedicated 40G LR4 optical transceiver.
Q6: What CWDM wavelength set does this custom 40G LRL4 optic use for inter-building network connections?
A: It uses four independent CWDM lanes at 1271 nm, 1291 nm, 1311 nm, and 1331 nm. Each lane carries 10 Gbps data to combine for a total aggregate bandwidth of 40 Gbps.
Q7: What temperature range does this bulk 40G LRL4 transceiver support for network integrator field deployments?
A: The standard commercial grade works from 0 °C to 70 °C. HYTOPTODEVICE also supplies industrial grade variants rated −40 °C to +85 °C for outdoor and harsh site environments.
Q8: Can custom buyers use passive cables to break out this 40G LRL4 transceiver into four separate 10G data streams?
A: Breakout with passive cables is not feasible for this module. Each 10G lane uses unique wavelengths on the same fiber pair, requiring CWDM mux/demux hardware; unlike SR4, LRL4 cannot fan out directly.
Q9: Does the HYTOPTODEVICE 40G LRL4 transceiver support lane-by-lane optical power monitoring for network troubleshooting?
A: Yes, DDM/DOM function comes standard on our module. Network administrators can read TX and RX power values for each of the four wavelengths through the switch CLI to validate end-to-end link health.
Q10: What fiber polarity considerations should resellers know when deploying duplex LC cables with this 40G LRL4 transceiver?
A: Duplex LC connectors use straightforward A-to-B keying so polarity errors are uncommon. The main risk is swapping transmit and receive at one fiber end, so always double-check fiber orientation during installation.
Q11: Why should enterprise network buyers select 40G LRL4 transceivers instead of DAC or AOC cabling for 2km campus links?
A: DAC cables only cover short distances of a few meters while AOC relies on multimode fiber with fixed length. The HYTOPTODEVICE LRL4 module is the proper choice for 2km single-mode campus and inter-building fiber links.
Q12: UPC or APC fiber endface polish — which specification do custom clients need for pairing with this 40G LRL4 transceiver?
A: LRL4 modules use UPC polish by industry standard. Your patch cords and patch panels must also use UPC; mixing UPC and APC creates high optical reflection and excess signal loss.
Q13: Is this 40G LRL4 optic an original OEM transceiver or a cost-saving compatible replacement for wholesaler stock?
A: OEM branded transceivers carry higher price tags with switch vendor branding. Our HYTOPTODEVICE compatible LRL4 modules follow MSA standards with identical functionality and cost 60–80% less, backed by our own manufacturer warranty.
Q14: What quality control testing will HYTOPTODEVICE perform on each 40G LRL4 transceiver before shipment to wholesale distributors?
A: Every transceiver undergoes full 100% factory testing. We validate TX power and RX sensitivity across all four CWDM lanes plus multi-brand switch compatibility testing; test reports are available upon request.
Q15: What warranty terms apply to bulk orders, and how do wholesalers submit an RMA request for defective HYTOPTODEVICE 40G LRL4 modules?
A: We provide a 5-year warranty paired with a streamlined RMA process. Simply report the fault, return the faulty unit, and receive a replacement or credit; all warranty terms should be confirmed in written order documentation.
Packaging & Custom OEM Solutions
Every 40G QSFP+ SR4 module ships in sealed ESD-safe packaging, ready for same-day dispatch. Bulk orders offer OEM customization—logo printing and private labeling—tailored for network distributors, integrators, and enterprise deployments.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.



