Arista QSFP‑100G‑ZR4‑S Compatible 100G QSFP28 ZR4 Transceiver | 100GBASE‑ZR4 1310nm LAN WDM 80km Duplex LC SMF Optical Module HYTOPTODEVICE
Product Overview
HYTOPTODEVICE 100G QSFP28 ZR4 transceiver is a drop‑in replacement for Arista QSFP-100G-ZR4-S. Built to 100GBASE-ZR4 and QSFP28 MSA standards, this high-performance optic delivers stable 100Gbps transmission up to 80km over OS2 single‑mode fiber, with 1310nm LAN WDM wavelength via duplex LC/UPC connector; host RS‑FEC must be enabled for proper operation.
Pre‑programmed with Arista-specific EEPROM data, it supports plug‑and‑play deployment and reduces unsupported transceiver alarms on Arista EOS switches and routers. HYTOPTODEVICE provides factory bulk stock, sample trial orders,private label and OEM customization for wholesalers, distributors and system integrators deploying long‑distance metro, DCI and indoor fiber links.
Key Technical Specifications
| Arista Compatible |
QSFP-100G-ZR4-S |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
QSFP28 |
Max Data Rate |
103.125Gbps (4x 25.78Gbps) |
| Wavelength |
1295.56nm, 1300.05nm 1304.58nm, 1309.14nm
|
Max Distance |
80km |
| Connector |
Duplex LC/UPC |
Transmitter Type |
EML LWDM |
| Cable Type |
SMF |
Receiver Type |
SOA + PIN |
| Modulation (Electrical) |
4x 25G-NRZ |
TX Power |
1~6.5dBm |
| Power Consumption |
< 4.5W |
Receiver Sensitivity |
< -28dBm |
| Protocols |
QSFP28 MSA, SFF-8636, IEEE 802.3bm, CAUI-4 |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the
Datasheet
Usage Guidelines & Best Practices
-
Fiber Choice: Works only with OS2 single-mode fiber. Multimode fiber is not compatible with this 1310nm LAN WDM module.
-
Optical Attenuator Required for Short Links: For testing or short‑distance connections (<15km), connect a 15dB–20dB optical attenuator to the RX port to prevent damaging the receiver.(15KM<Distance<35km,connect 10‑15dB optical attenuator),ensuring the received power between -28~-7dBm.
-
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
-
Installation Specification: Hot-swap supported. Follow ESD anti-static procedures and keep LC connectors clean for stable links.
- Mode Setting: Configure 100G port speed via switch CLI. This ZR4 module does not support breakout to 4×25G.
For detailed operation instructions, please refer to the
User Guide.
Full Compatibility List & Supported Network Hardware
1. Supported Hardware & Firmware
This module features Arista-tailored EEPROM programming, minimizing transceiver warnings for Arista EOS platforms. All products undergo full temperature burn‑in testing before shipment, compatible with the below Arista hardware:
• Arista 7050X,7060X,7250X,7260X Series Data Center Switches
• Arista 7500 Series Chassis Switches
• Arista 7800 Series High Density Switches
• Universal Compatibility: All Arista network devices with standard QSFP28 ports supporting 100GBASE-ZR4 protocol
2. Multi-Brand Cross Compatibility
Built on universal MSA open standards, this QSFP28 transceiver works seamlessly with mainstream brands including Cisco, HPE, Juniper, Huawei, and Fortinet. It supports mixed‑vendor network upgrades for indoor data center environments.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• Indoor long-distance campus & branch 80km point-to-point fiber links
• Carrier metro aggregation and long-haul backbone transmission
• Remote data center interconnection (DCI)
• 100G to 100G link for Switch‑Adapter Card inter‑connections
• 100G structured cabling deployment for data‑center and enterprise backbone infrastructure
• Network hardware upgrade for Arista data center infrastructure
• Inventory supply for global distributors and system integrators working on metro network tender projects
Connectivity Solutions(Applications)
1.Leaf-Spine Architecture

2. 100G to 100G for Switch-Switch Interconnection

3.100G to 100G for Switch-NIC Connection

4.100G Structured Cabling

The Core Feature
1.Low Power Consumption for High-Density Deployment for Data Center
Low power draw supports high-density port layout in data center racks, saving system power budget for leaf-spine and metro switch deployments.

2.Verified Host Interoperability
All modules pass real target device interoperability tests. Matched EEPROM ensures zero-alarm hot-swap and stable long-term operation on mainstream platforms.

3.Strict Full-Round Quality Testing
Every module undergoes comprehensive test. Strict quality control (IQC/PQC/OQC/FQC) guarantees stable 24/7 commercial operation.

FAQ
1: Can this 100G ZR4 transceiver run smoothly on standard QSFP28 switch ports?
A: Yes, this HYTOPTODEVICE Arista compatible 100G ZR4 optic fits native QSFP28 100G slots. No extra adapters required for modern Arista EOS routers and switches, simplifying hardware rollout for system integrators building metro DCI fiber links.
Q2: Will third-party 100G ZR4 optics trigger alert messages on Arista network gear?
A: OEM switch operating systems may generate transceiver alarms for non-vendor optics. Arista EOS has related configuration commands to suppress these alerts, and our custom programmed EEPROM reduces warning occurrences for bulk wholesale buyers.
Q3: Is it feasible to pair transceivers from different manufacturers on two ends of one fiber link?
A: Link-up can be achieved only when optical parameters and RS-FEC configuration match exactly. Cross-vendor transceiver pairs have no official interoperability guarantee, so HYTOPTODEVICE recommends matched transceiver pairs for stable long-distance fiber transmission.
Q4: What industry specification governs the 100G ZR4 optical module?
A: There is no dedicated IEEE standard defined for 100G ZR4. This HYTOPTODEVICE QSFP28 ZR4 transceiver follows industry MSA multi-source agreements and vendor implementation specifications to maintain hardware interoperability.
Q5: What maximum transmission distance can this 100G ZR4 optic reliably support?
A: The guaranteed transmission distance reaches 80 km over OS2 G.652 single mode fiber. Our Arista compatible ZR4 transceiver maintains error-free 100Gbps performance over this full span for metro and campus backbone deployments.
Q6: Is longer-distance transmission achievable by adding optical amplifiers?
A: Longer fiber spans over 80km are achievable with external EDFA optical amplifiers. Project designers must complete a full link budget analysis and evaluate chromatic dispersion limits before deploying extended long-haul fiber routes.
Q7: Does this 100G ZR4 module support real-time optical parameter monitoring?
A: Yes, DOM/DDM real-time telemetry is fully supported. Network operators can remotely track module temperature, laser bias, transmit optical power and received signal power for continuous remote monitoring of metro 100G fiber links.
Q8: How much power does this Arista compatible 100G ZR4 transceiver consume?
A: This 100G ZR4 transceiver consumes under 4.5W. Its power rating is optimized for indoor data center environments.
Q9: Are there thermal risks when populating all QSFP28 ports in a dense switch chassis?
A: Yes, fully populated high-density port panels create accumulated thermal load. Filling all QSFP28 ports with 100G ZR4 modules may push local temperature out of safe operating limits, requiring thermal planning for data center cabinet design.
Q10: What negative impacts will high rack temperature bring to 100G ZR4 optical links?
A: Elevated ambient temperature shifts laser bias settings and degrades transmit optical power. Network operation teams can capture these changes early using DOM alerts to prevent unexpected link drops inside data center racks.
Q11: Where should users deploy this QSFP28 ZR4 transceiver for best performance?
A: This module is designed for controlled indoor environments like data centers. Stable ambient temperature ensures consistent transmission performance for metro and DCI fiber connections.
Q12: What hidden risks come with low-cost untested generic optical transceivers?
A: Unverified low-cost transceivers carry high DOA risk, poor laser calibration, unstable BER performance and limited after-sales warranty. Distributors for carrier-grade projects should select fully factory-tested HYTOPTODEVICE 100G ZR4 optics.
Q13: How do production lead times affect large-scale data center rollout schedules?
A: Long-reach specialized 100G ZR4 optics are not mass-produced like short-reach SR4 data center modules, which can lead to longer procurement lead times. Buyers should place orders in advance to avoid delays for metro DCI construction projects.
Q14: How frequently do brand-new optical modules arrive dead on delivery?
A: Trusted manufacturers keep DOA rates below 0.1% through strict quality control. Each HYTOPTODEVICE ZR4 transceiver undergoes optical loopback and temperature stress aging before shipment, delivering reliable quality for bulk wholesale customers.
Q15: What certifications should qualified 100G optical transceivers possess?
A: Qualified optical transceivers need CE, FCC, RoHS and Class 1 Laser safety certifications. HYTOPTODEVICE provides complete certification documentation with shipments to satisfy customs clearance and project audit requirements for system integrators.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

