Arista CAB-SFP-SFP-5M Compatible 10GB SFP+ DAC Cable 5m | 10GBASE-CU Passive Twinax Bulk Wholesale | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE Arista CAB-SFP-SFP-5M compatible 10GB SFP+ DAC cable serves as a seamless drop-in replacement for original Arista 5m 10G passive twinax DAC. It complies with SFF-8431 and 10GBASE-CU MSA standards. As a reliable manufacturer with stable inventory supporting wholesalers, distributors and resellers, we enable buyers to purchase and procure dependable 10gb sfp+ dac cable with ultra-low latency 10Gbps transmission. This twinax cable fits Arista rack trunk, server uplink and intra-rack leaf-spine fabric links.
It comes pre-programmed with Arista EEPROM signature for plug-and-play deployment and helps avoid transceiver warning alerts on Arista EOS switching platforms. HYTOPTODEVICE supports bulk buying, sample testing, OEM private label and fast shipment for distributors, resellers and system integrators
Key Technical Specifications
| Arista Compatible |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
5m (16.4ft) |
Wire AWG |
AWG 24 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
30mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target Cisco hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated Arista Hardware & Firmware
This 10gb sfp+ dac cable is preloaded with Arista EEPROM data, supports alarm-free plug-and-play on Arista network hardware. Every cable passes target device testing before leaving our factory:
• Arista 7050SX3,7050QX leaf-spine switches
• Arista 7060CX,7060SX series aggregation switches
• Arista 7280SR,7280CR core data center switches
• Arista EOS-based server SFP+ NIC and converged network adapters
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this 10gb SFP+ DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• Arista switch to server 10G rack trunk uplink
• Intra-rack Arista switch interconnection for leaf-spine fabric
• Leaf-spine fabric short-range interconnection
• Virtualization cluster and storage fabric interconnection
• Stock sourcing and bulk purchase for distributors, wholesalers and network resellers
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the 10gb SFP+ DAC replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive 10gb SFP+ DAC draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP+ passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: Are generic MSA-compliant 10G DAC cables guaranteed to work on all open switches?
A: No, MSA compliance does not guarantee compatibility with every open switch. MSA defines electrical specs, but some open switches validate transceiver EEPROM signatures. HYTOPTODEVICE pre-programs EEPROM to match target platforms and conducts target switch testing to deliver stable links for most mainstream open switch hardware.
Q2: Will using third-party 10G DAC cables void my network equipment’s OEM warranty?
A: No, reputable third-party 10G DACs will not automatically void your OEM hardware warranty in most regions. Warranty exclusion only applies when cable defects directly cause physical damage to the host port. HYTOPTODEVICE provides quality-tested DACs with full test records to help protect your original equipment coverage.
Q3: Can DAC cables degrade or fail over time due to thermal stress?
A: Yes, long-term repeated thermal cycling can gradually degrade twinax insulation and internal conductors. Our HYTOPTODEVICE 10G DAC cables use temperature-rated jacket materials and pass thermal aging screening, reducing the risk of intermittent faults in hot data center rack environments.
Q4: Are DAC cable connectors hot-swappable?
A: Yes, SFP+ DAC ends support hot swapping under normal 10GBASE-CU operation. You may insert or remove the cable without powering down the switch or server. HYTOPTODEVICE designs each cable with compliant gold-plated contacts to withstand repeated hot-plug cycles.
Q5: How can I prevent strain on the SFP+ port when using heavy 24AWG DAC cables?
A: Use cable strain relief clips, cable management brackets and secure rack routing to suspend cable weight away from the transceiver. HYTOPTODEVICE recommends 30AWG for dense deployments; we also offer support accessories to reduce port stress for bulk 24AWG DAC orders.
Q6: Can I connect a 10G DAC cable directly to a 10G PCIe Network Interface Card (NIC)?
A: Yes, it works if the NIC has a standard SFP+ port and supports 10GBASE-CU. Verify the NIC firmware accepts third-party optics before deployment. HYTOPTODEVICE DACs are widely validated with mainstream Intel and Mellanox 10G SFP+ NICs.
Q7: Do supplier factories perform TDR and Eye Diagram signal testing on every cable batch?
A: Not all suppliers test every batch with TDR and eye diagram. HYTOPTODEVICE runs TDR and eye diagram sampling per production batch alongside end-to-end host testing, confirming impedance, signal integrity and reducing link flutter for wholesale buyers.
Q8: Are 10G DAC cables RoHS and REACH compliant?
A: Yes, HYTOPTODEVICE 10G SFP+ DAC cables meet RoHS and REACH requirements. We can supply compliance certificates upon request for distributors, system integrators and enterprise procurement teams.
Q9: What is the typical return/defective rate (RMA) for low-cost 10G DAC cables?
A: Budget untested DACs often carry an RMA rate above 2–3%. HYTOPTODEVICE maintains a controlled defective rate far below 0.5% via strict QC and target switch testing, which lowers after-sales workload for resellers and bulk purchasers.
Q10: What warranty length should I expect when purchasing enterprise 10G DAC cables?
A: Standard enterprise-grade 10G DAC warranties commonly range from 1 to 3 years. HYTOPTODEVICE provides multi-year warranty coverage and dedicated technical support for wholesale and distributor orders of our SFP+ twinax cables.
Q11: Are custom length DAC cables (e.g., 1.5m, 2.5m, 4m) returnable if ordered incorrectly?
A: Custom non-standard length DACs are generally non-returnable unless they arrive with factory defects. HYTOPTODEVICE confirms length specifications with buyers before production and offers sample pre-testing for custom-length bulk orders.
Q12: How are DAC cables packaged to prevent pin or wire damage during transport?
A: Individual DACs are packed with dust caps on both SFP+ connectors, coiled loosely inside anti-static bags and outer cartons with cushioning. HYTOPTODEVICE uses this packaging method to guard pins and internal twinax wiring during international wholesale shipping.
Q13: How do I troubleshoot a 10G DAC cable that shows "No Link / Port Down"?
A: First reseat both ends and check port configuration for 10GBASE-CU. If it still fails, swap with a known good HYTOPTODEVICE DAC to isolate the fault between cable, port or firmware restriction. We supply troubleshooting guides to our bulk buyers.
Q14: How can I clean SFP+ DAC connectors if dust enters the module head?
A: Use approved SFP+ connector cleaning sticks for copper contact surfaces; avoid alcohol overspray or rough cloths. HYTOPTODEVICE ships DACs with protective dust caps and recommends regular cleaning cycles for high-dust server room environments.
Q15: Why does my switch log show high Bit Error Rates (BER) only after several hours of operation?
A: This is usually caused by thermal expansion shifting contact pressure or marginal signal integrity. HYTOPTODEVICE thermal screening catches these marginal units before shipment, helping you avoid delayed BER issues in continuous 24/7 data center operation.
Q16: What is the most effective way to store spare 10G DAC cables without degrading performance?
A: Store indoors at room temperature, keep dust caps installed, avoid tight over-coiling and heavy stacking. HYTOPTODEVICE advises distributors to stock spare DACs in anti-static bins, away from direct heat sources to preserve electrical performance long-term.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

