• HYTOPTODEVICE 40G QSFP+ PASSIVE COPPER CABLE FOR DATA CENTER
  • hytoptodevice supply 40g qsfp+ dac cable passive copper twinax
  • 40g dac cable passive copper twinax DAC from hytoptodevice
  • Passive copper twinax cable 40g qsfp+
  • HYTOPTODEVICE 40G QSFP+ PASSIVE COPPER CABLE FOR DATA CENTER
  • hytoptodevice supply 40g qsfp+ dac cable passive copper twinax
  • 40g dac cable passive copper twinax DAC from hytoptodevice
  • Passive copper twinax cable 40g qsfp+

Arista CAB-Q-Q-2M Compatible 40G QSFP+ Passive Copper Cable 2m(7ft) Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE is a professional factory supplier for bulk purchase of 40G QSFP+ passive copper cable. This 2m Arista compatible 40G QSFP+ passive copper cable is designed for use in 40GBASE Ethernet, supports 40GBASE-CR4, ideal for ultra-short intra-rack cabling on Arista EOS platforms. Buy 40G QSFP+ passive copper cable for Arista leaf-spine fabric and switch stacking.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco QSFP-H40G-CU2M 
2 Arista Networks  CAB-Q-Q-2M
3 Juniper JNP-QSFP-DAC-2M
4 Dell CBL-QSFP-40GE-PASS-2M
5 NVIDIA/Mellanox MC2210130-002
Description

Arista CAB-Q-Q-2M Compatible 40G QSFP+ Passive Copper Cable 2m(7ft) Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 2m(7ft) QSFP+ to QSFP+ 40G QSFP+ passive copper cable serves as direct drop-in replacement for Arista CAB-Q-Q-2M. It is designed for use in 40GBASE Ethernet, meets 40GBASE-CR4, SFF-8436 and IEEE 802.3bj standards to deliver stable 40Gbps ultra-short intra-rack connections. This twinax DAC has no active chips, consumes 0W power and supports hot swap. We preload Arista-matched EEPROM signatures to eliminate transceiver warning logs on Arista EOS switches. Available for bulk order, sample testing and OEM private label service for distributors and system integrators.

Key Technical Specifications

 Arista Compatible
 CAB-Q-Q-2M 
Vendor Name HYTOPTODEVICE
Connector QSFP+ to QSFP+ Max Data Rate 40Gbps
Cable Length 2m (7ft) Wire AWG AWG 30
Cable Type Passive Twinax Power Consumption ≤0.5W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols SFF-8436, QSFP+ MSA and IEEE 802.3ba
Minimum Bend Radius 35mm Application 40G InfiniBand 8x DDR, 4x QDR, 10/40 Gigabit Ethernet, Fibre Channel

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Setting: Host QSFP+ port must enable 40GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.

  • Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.

  • Port Installation Standard: Works only with standard QSFP+ 40G ports; cannot be inserted into SFP+ or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.

  • Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated Arista Hardware & Firmware

  • Arista 7050Q, 7060Q, 7280Q series 40G leaf-spine switches running EOS
  • Arista 7300X series modular data center switches with QSFP+ ports
  • Arista DCS-7050QX high-density 40G switching platforms

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 40G QSFP+ passive copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 
  • Ultra-short intra-rack leaf-to-server cabling for Arista EOS leaf-spine fabrics
  • Arista 40G switch stacking and fabric interconnect inside compact server racks
  • Low-latency distributed storage and NVMe-oF networking
  • Virtualization and hyper-converged infrastructure short connections
  • Direct replacement for original Arista CAB-Q-Q-2M QSFP+ to QSFP+ 40G QSFP+ passive copper cable
  • High-density rack internal 40G interconnection for 40GBASE Ethernet deployments

Connectivity Solutions(Applications) 

1. 40G to 40G Direct Link for Switch-Switch
hytoptodevice 40g qsfp+ direct attach copper twinax cable

The Core Feature

1. Cost-Effective Ultra-Short Connectivity

Using twinax copper, the 40G passive copper cable replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

hytoptodevice QSFP+ to QSFP+ 40g qsfp+ dac cable for data center

2. Ultra-Low Power, Maximum Energy Efficiency

The 40g qsfp+ passive copper twinax cable draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 40G link for short-reach connections — within a rack or across adjacent racks.

QSFP+ form factor 40g qsfp+ dac cable with low power consumption

3.Host-Device Tested for Proven Interoperability

Every 40g passive copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits? Compatibility Video available upon request.

hytoptodevice wholesale 40G QSFP+ twinax cable for data center

4. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE  QSFP+ to QSFP+ 40g qsfp+ dac cable for switches

FAQ

Q1: Can this Arista compatible 40G QSFP+ passive copper cable run full 40G rate stably on Arista EOS? A: Yes, this HYTOPTODEVICE 40G QSFP+ passive copper cable supports full 40Gbps line rate. It is pre-programmed with Arista EEPROM and validated on EOS for reliable 40GBASE-CR4 links in 40GBASE Ethernet environments.

Q2: What is the maximum reliable transmission distance for a 40G QSFP+ passive copper cable? A: The rated maximum reach for passive 40G QSFP+ passive copper cable is 5-7 meters. This 0.5M short variant fits tight space inside Arista data racks for 40GBASE Ethernet.

Q3: Can this 40G QSFP+ passive copper cable connect Arista leaf switches to Cisco 40G fabric devices? A: Cross-brand interconnection works reliably with unified 40GBASE-CR4 and matching FEC configuration. This 40G QSFP+ passive copper cable complies with MSA specs for multi-vendor 40GBASE Ethernet fabrics.

Q4: What is the main difference between a 40G QSFP+ passive copper cable and 25G SFP28 DAC? A: A 40G QSFP+ passive copper cable delivers 40G bandwidth across four differential lanes for 40GBASE Ethernet, while 25G SFP28 DAC only supports single-lane 25G. It fits legacy 40G Arista fabric upgrades.

Q5: What link faults will appear if a 40G QSFP+ passive copper cable exceeds its 7m limit? A: 40G high-speed copper signal attenuates heavily over 7 meters. Longer lengths trigger CRC errors and link flapping; choose AOC for cross-rack 40GBASE Ethernet runs.

Q6: Which Arista EOS workloads gain the most latency advantage using this 40G QSFP+ passive copper cable? A: VM migration, distributed storage and HPC cluster traffic benefit most. This HYTOPTODEVICE 40G QSFP+ passive copper cable maintains steady ultra-low latency for 40GBASE Ethernet.

Q7: Can this 2M 40G QSFP+ passive copper cable connect two QSFP+ NICs point-to-point? A: Direct NIC-to-NIC interconnection is fully supported with correct port configuration. This 40G QSFP+ passive copper cable works well for local server node sync on 40GBASE Ethernet.

Q8: How does AWG gauge affect signal quality of a short 40G QSFP+ passive copper cable? A: 30AWG provides great flexibility and stable signal for 0.5M short links in 40GBASE Ethernet; thicker 24AWG is reserved for passive cables near the 5m limit. This cable adopts 30AWG twinax for dense Arista racks.

Q9: Will Arista EOS firmware updates affect switch recognition of this 40G QSFP+ passive copper cable? A: MSA-compliant 40G QSFP+ passive copper cable keeps compatibility with mainstream EOS releases. Preloaded Arista EEPROM ensures stable detection after firmware upgrades for 40GBASE Ethernet links.

Q10: When should I select AOC fiber instead of a 40G QSFP+ passive copper cable for Arista deployments? A: Pick active optical cables for cross-rack connections or distances over 7 meters. A 40G QSFP+ passive copper cable is zero-power and cost-effective for intra-rack 40GBASE Ethernet stacking.

Q11: How much latency saving can a 40G QSFP+ passive copper cable deliver versus fiber plus transceivers? A: A 40G QSFP+ passive copper cable cuts roughly 40–70ns latency by removing optical-electrical conversion, ideal for latency-sensitive 40GBASE Ethernet storage traffic.

Q12: Can this 40G QSFP+ passive copper cable negotiate 40G on SFP28 or SFP+ ports? A: 40G negotiation fails on non-QSFP+ ports due to different pinout and lane grouping. Both ends require native QSFP+ ports to reach full 40G bandwidth for 40GBASE Ethernet.

Q13: Can QSFP+ breakout DAC replace this straight 40G QSFP+ passive copper cable? A: Breakout DAC splits one 40G port into four independent 10G ports. It cannot substitute this point-to-point 40G QSFP+ passive copper cable for native 40GBASE Ethernet links.

Q14: What quality inspection does HYTOPTODEVICE run for each batch of 40G QSFP+ passive copper cable? A: Every batch completes BER testing, link verification and hot-swap validation on Arista EOS hardware to confirm EEPROM readability and stable 40G signal for 40GBASE Ethernet.

Q15: What installation notes should bulk buyers follow for a 40G QSFP+ passive copper cable? A: A 40G QSFP+ passive copper cable is designed only for short intra-rack copper links in 40GBASE Ethernet. It is not suitable for inter-row or cross-room long-distance transmission.


Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • HYTOPTODEVICE 40G QSFP+ PASSIVE COPPER CABLE FOR DATA CENTER
  • hytoptodevice supply 40g qsfp+ dac cable passive copper twinax
  • 40g dac cable passive copper twinax DAC from hytoptodevice
  • Passive copper twinax cable 40g qsfp+
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download