| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-H40G-CU50CM | |
| 2 | Arista Networks | CAB-Q-Q-0.5M | |
| 3 | Juniper | EX-QSFP-40GE-DAC-50CM | |
| 4 | Brocade | 40G-QSFP-C-00501 | |
| 5 | Dell | 332-1362 | |
| 6 | Intel | XLDACBL05 | |
| 7 | NVIDIA/Mellanox | MC2206130-00A |
| Arista Compatible |
CAB-Q-Q-0.5M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP+ to QSFP+ | Max Data Rate | 40Gbps |
| Cable Length | 0.5m (1.6ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | SFF-8436, QSFP+ MSA and IEEE 802.3ba |
| Minimum Bend Radius | 35mm | Application | 40G InfiniBand 8x DDR, 4x QDR, 10/40 Gigabit Ethernet, Fibre Channel |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP+ port must enable 40GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard QSFP+ 40G ports; cannot be inserted into SFP+ or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 40G QSFP+ passive copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.





Q1: Can this Arista compatible 40G QSFP+ passive copper cable run full 40G rate stably on Arista EOS? A: Yes, this HYTOPTODEVICE 40G QSFP+ passive copper cable supports full 40Gbps line rate. It is pre-programmed with Arista EEPROM and validated on EOS for reliable 40GBASE-CR4 links in 40GBASE Ethernet environments.
Q2: What is the maximum reliable transmission distance for a 40G QSFP+ passive copper cable? A: The rated maximum reach for passive 40G QSFP+ passive copper cable is 5 meters. This 0.5M short variant fits tight space inside Arista data racks for 40GBASE Ethernet.
Q3: Can this 40G QSFP+ passive copper cable connect Arista leaf switches to Cisco 40G fabric devices? A: Cross-brand interconnection works reliably with unified 40GBASE-CR4 and matching FEC configuration. This 40G QSFP+ passive copper cable complies with MSA specs for multi-vendor 40GBASE Ethernet fabrics.
Q4: What is the main difference between a 40G QSFP+ passive copper cable and 25G SFP28 DAC? A: A 40G QSFP+ passive copper cable delivers 40G bandwidth across four differential lanes for 40GBASE Ethernet, while 25G SFP28 DAC only supports single-lane 25G. It fits legacy 40G Arista fabric upgrades.
Q5: What link faults will appear if a 40G QSFP+ passive copper cable exceeds its 5m limit? A: 40G high-speed copper signal attenuates heavily over 5 meters. Longer lengths trigger CRC errors and link flapping; choose AOC for cross-rack 40GBASE Ethernet runs.
Q6: Which Arista EOS workloads gain the most latency advantage using this 40G QSFP+ passive copper cable? A: VM migration, distributed storage and HPC cluster traffic benefit most. This HYTOPTODEVICE 40G QSFP+ passive copper cable maintains steady ultra-low latency for 40GBASE Ethernet.
Q7: Can this 0.5M 40G QSFP+ passive copper cable connect two QSFP+ NICs point-to-point? A: Direct NIC-to-NIC interconnection is fully supported with correct port configuration. This 40G QSFP+ passive copper cable works well for local server node sync on 40GBASE Ethernet.
Q8: How does AWG gauge affect signal quality of a short 40G QSFP+ passive copper cable? A: 30AWG provides great flexibility and stable signal for 0.5M short links in 40GBASE Ethernet; thicker 24AWG is reserved for passive cables near the 5m limit. This cable adopts 30AWG twinax for dense Arista racks.
Q9: Will Arista EOS firmware updates affect switch recognition of this 40G QSFP+ passive copper cable? A: MSA-compliant 40G QSFP+ passive copper cable keeps compatibility with mainstream EOS releases. Preloaded Arista EEPROM ensures stable detection after firmware upgrades for 40GBASE Ethernet links.
Q10: When should I select AOC fiber instead of a 40G QSFP+ passive copper cable for Arista deployments? A: Pick active optical cables for cross-rack connections or distances over 5 meters. A 40G QSFP+ passive copper cable is zero-power and cost-effective for intra-rack 40GBASE Ethernet stacking.
Q11: How much latency saving can a 40G QSFP+ passive copper cable deliver versus fiber plus transceivers? A: A 40G QSFP+ passive copper cable cuts roughly 40–70ns latency by removing optical-electrical conversion, ideal for latency-sensitive 40GBASE Ethernet storage traffic.
Q12: Can this 40G QSFP+ passive copper cable negotiate 40G on SFP28 or SFP+ ports? A: 40G negotiation fails on non-QSFP+ ports due to different pinout and lane grouping. Both ends require native QSFP+ ports to reach full 40G bandwidth for 40GBASE Ethernet.
Q13: Can QSFP+ breakout DAC replace this straight 40G QSFP+ passive copper cable? A: Breakout DAC splits one 40G port into four independent 10G ports. It cannot substitute this point-to-point 40G QSFP+ passive copper cable for native 40GBASE Ethernet links.
Q14: What quality inspection does HYTOPTODEVICE run for each batch of 40G QSFP+ passive copper cable? A: Every batch completes BER testing, link verification and hot-swap validation on Arista EOS hardware to confirm EEPROM readability and stable 40G signal for 40GBASE Ethernet.
Q15: What installation notes should bulk buyers follow for a 40G QSFP+ passive copper cable? A: A 40G QSFP+ passive copper cable is designed only for short intra-rack copper links in 40GBASE Ethernet. It is not suitable for inter-row or cross-room long-distance transmission.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




