• HYTOPTODEVICE  compatible 10G SFP+ to SFP+ active optical cable 1m
  • 1m  compatible 10G SFP+ active optical cable for data center
  • Arista AOC-S-S-10G-1M Compatible 10G SFP+ TO SFP+ Active Optical Cable 1m Bulk Wholesale | HYTOPTODEVICE
  • Arista AOC-S-S-10G-1M Compatible 10G SFP+ TO SFP+ Active Optical Cable 1m Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE  compatible 10G SFP+ to SFP+ active optical cable 1m
  • 1m  compatible 10G SFP+ active optical cable for data center
  • Arista AOC-S-S-10G-1M Compatible 10G SFP+ TO SFP+ Active Optical Cable 1m Bulk Wholesale | HYTOPTODEVICE
  • Arista AOC-S-S-10G-1M Compatible 10G SFP+ TO SFP+ Active Optical Cable 1m Bulk Wholesale | HYTOPTODEVICE

Arista AOC-S-S-10G-1M Compatible 10G SFP+ TO SFP+ Active Optical Cable 1m Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE, your trusted arista sfp+ active optical cable supplier, provides Arista AOC-S-S-10G-1M compatible 10G SFP+ to SFP+ active optical cable, 1m length, MSA compliant, DDM supported, bulk wholesale for Arista data center switch stacking and server uplink connections.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco SFP-10G-AOC1M
2 Arista Networks AOC-S-S-10G-1M
3 Dell CBL-10GSFP-AOC-1M
4 Juniper Networks  JNP-10G-AOC-1M
5 H3C SFP-XG-D-AOC-1M
6 Extreme  10GB-F01-SFPP
7 Mikrotik  S+AO0001
8  Brocade  10G-SFPP-AOC-0101
Description

Arista AOC-S-S-10G-1M Compatible 10G SFP+ TO SFP+ Active Optical Cable 1m Bulk Wholesale | HYTOPTODEVICE


Product Overview

As a professional arista sfp+ active optical cable supplier, HYTOPTODEVICE’s 1m Arista AOC-S-S-10G-1M compatible 10G SFP+ to SFP+ active optical cable meets SFF-8431 MSA and 10GBASE-R standards. Pre-coded for Arista EOS, this lightweight multimode fiber AOC delivers stable 10Gbps links with strong EMI resistance for intra-rack switch stacking and server uplinks. All units pass optical burn-in testing. We support bulk wholesale, OEM and custom EEPROM programming for data center integrators.

Key Technical Specifications

Arista Compatible
AOC-S-S-10G-1M
Vendor Name HYTOPTODEVICE
Connector SFP+ to SFP+ Max Data Rate 10Gbps
Operating Wavelength 850nm Fiber Cable OM3 MMF
Cable Length 1m (3ft) Power Consumption ≤0.8W
Jacket Material OFNP Operation Temperature 0~ 70 °C (32 to 158°F)
Minimum Bend Radius 30mm Protocols 1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel
Application 10G Ethernet Warranty 5 Years

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Verify your Cisco IOS firmware version before installation to ensure normal module recognition.

  • Do not bend the cable below the minimum bend radius to prevent internal fiber damage.

  • Keep the SFP+ connector end clean; avoid dust and scratches on optical contact surface.

  • Hot-swap supported; insert and remove the cable gently without excessive force.

  • Run link health check after installation to confirm 10G link status.
  • Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid high temperature, humid and dusty harsh environment for long-term operation.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated Arista Hardware & Firmware

• Arista 7050SX series 10G leaf data center switches
• Arista 7060SX stackable 10G Ethernet switches
• Arista 7280R high-performance 10G spine switches
• Arista 10G SFP+ NIC adapters for server uplink
• Arista EOS 4.21.0F and newer firmware releases

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 10G SFP+ active optical cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell and more, for mixed-vendor rack stacking and server interconnection.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 

• Intra-rack 10G interconnection for Arista switch stacking
• 10G server uplink connections in medium and large data centers
• Short-range 10G link replacement for bulky copper twinax cables
• 10G network refresh for cloud computing and enterprise server rooms
• Bulk procurement for IT distributors and integrators sourcing from a trusted arista sfp+ active optical cable supplier
• Lab POC validation for 10GBASE-R SFP+ optical links

Connectivity Solutions(Applications) 

1. 10G to 10G Direct Link for Switch-Switch
hytoptodevice compatible sfp+ 10g aoc cable for switch to switch

2. 10G to 10G Direct Link for Switch-NIC
hytoptodevice sfp+ 10g active optical calbe for data center

3. Leaf-spine Architecture

SFP+ 10G active optical cable aoc from hytoptodevice


The Core Feature

1. Simplified Short-Reach Interconnect

Using AOC way replaces traditional solution, makes short-reach easy, no cleaning, lower total cost. perfect for In-rack & adjacent-rack links.

HYTOPTODEVICE active fiber optic cable FOR SHORT reach

2. High-Density 10G Connectivity for Data Center

Supports steady 10Gbps 10GBASE-R transmission. Slim and lightweight fiber design eases dense cable routing, ideal for high-port-count SFP+ switch deployments inside data center racks.

hytoptodevice 10g sfp+ active optical vs copper cables

3.Pre-Tested on Real Switches

Each 10G SFP+ AOC is validated on actual host switches before delivery — instant link-up, zero surprises, zero downtime.

hytoptodevice sfp+ 10g aoc cabe for data center

4. 100% Unit-Level Testing — Zero Sampling

Every single unit is individually validated for optical compliance and long-term stability before packing — no batch sampling, no shortcuts, no exceptions. Unit after unit, the performance stays identical. Take a virtual tour of our Test Center.

HYTOPTODEVICE supply 10G SFP+ AOC transceiver cable



FAQS

Q1: Will this 10G SFP+ AOC cable work with my Cisco, HPE, or Dell switches? A: Yes, our HYTOPTODEVICE Arista compatible 10G SFP+ AOC follows MSA standards, supporting cross-brand interoperability. It can run stable 10G links on Cisco, HPE, Dell and other standard SFP+ platforms for mixed-vendor rack deployments.

Q2: Is an SFP+ AOC backward compatible with older 1G (Gigabit) SFP ports? A: No, this 10G SFP+ active optical cable is built for fixed 10GBASE-R operation. It cannot negotiate down to 1G speed and will not work on legacy Gigabit SFP ports.

Q3: Will using a third-party AOC cable void my switch manufacturer's hardware warranty? A: Generally, MSA-compliant third-party AOCs such as our HYTOPTODEVICE Arista compatible 10G SFP+ AOC will not damage your switch hardware. Warranty policies vary by vendor; you may confirm details with your hardware supplier.

Q4: Will this cable report proper Digital Diagnostic Monitoring (DDM/DOM) data to my switch? A: Absolutely. This Arista 10G SFP+ AOC supports full DDM/DOM function. You can monitor transmit power, receive power and module temperature directly from your Arista EOS switch CLI.

Q5: Are these SFP+ AOC cables compliant with industry standards? A: Yes. HYTOPTODEVICE’s 10G SFP+ AOC meets SFF-8431 and 10GBASE-R MSA specifications, plus RoHS and REACH compliance for global data center networking deployments.

Q6: What is the primary difference between an SFP+ DAC (Twinax) and an SFP+ AOC? A: SFP+ DAC uses copper twinax for signal transmission, while our SFP+ AOC uses internal multimode fiber. AOC is lighter, EMI-resistant and better for dense cabinet cabling in high-density data center racks.

Q7: Can I cut or shorten an AOC cable if it is too long for my setup? A: No. Cutting the AOC will destroy the integrated optical transceiver assemblies inside the ends. Order custom lengths directly from HYTOPTODEVICE for your exact rack layout requirements.

Q8: What is the latency of an SFP+ Active Optical Cable? A: This 1m 10G SFP+ AOC delivers ultra-low, consistent latency suitable for low-latency enterprise and data center workloads. Optical AOC latency is steady and predictable for switch stacking links.

Q9: Can a 10G AOC cable handle continuous line-rate traffic without packet loss? A: Yes. Every HYTOPTODEVICE 10G SFP+ AOC undergoes 24-hour burn-in testing. It supports sustained full 10G line-rate traffic with zero packet loss under normal operating conditions.

Q10: What type of fiber optic core is used inside an SFP+ AOC? A: This Arista compatible 10G SFP+ AOC uses multimode fiber paired with 850nm VCSEL transmitters, the standard fiber core for short-reach 10G SFP+ active optical cable solutions.

Q11: How flexible is an SFP+ AOC cable? Can I bend it tightly? A: The fiber AOC is more flexible than copper DAC, but it has a strict minimum bend radius. Sharp, tight bends will crack the internal fiber and cause unstable links or permanent failure.

Q12: Will the weight of an AOC cable strain my switch ports? A: Compared with heavy copper twinax DAC, this lightweight fiber AOC puts minimal stress on SFP+ ports. We recommend cable management brackets to support the connectors in high-density switch cabinets.

Q13: Do the optical connector tips require cleaning before installation? A: Yes. Dust and oil on optical end faces can reduce optical power and trigger link flapping. Clean the SFP+ optical tips before plugging in our HYTOPTODEVICE 10G SFP+ AOC for best performance.

Q14: Are SFP+ AOC cables hot-swappable? A: Yes. This Arista compatible 10G SFP+ AOC supports hot swap. You can insert or remove the cable while the switch remains powered on without hardware damage.

Q15: How do AOC cables help with data center airflow? A: Our slim, lightweight SFP+ AOC reduces bulky cable congestion inside racks. Less cable clutter clears air passages, improves cooling airflow and lowers thermal risks for high-density 10G switch fabrics.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • HYTOPTODEVICE  compatible 10G SFP+ to SFP+ active optical cable 1m
  • 1m  compatible 10G SFP+ active optical cable for data center
  • Arista AOC-S-S-10G-1M Compatible 10G SFP+ TO SFP+ Active Optical Cable 1m Bulk Wholesale | HYTOPTODEVICE
  • Arista AOC-S-S-10G-1M Compatible 10G SFP+ TO SFP+ Active Optical Cable 1m Bulk Wholesale | HYTOPTODEVICE
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download