• Juniper SFP-GE120KT15R14 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE
  • Juniper SFP-GE120KT15R14 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 120km SMF 1.25G
  • hytoptodevice offer 1000BASE-BX-U bidi transceiver 120km SMF 1.25g
  • Juniper SFP-GE120KT15R14 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE
  • Juniper SFP-GE120KT15R14 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 120km SMF 1.25G
  • hytoptodevice offer 1000BASE-BX-U bidi transceiver 120km SMF 1.25g

Juniper SFP-GE120KT15R14 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE, reliable BIDI TRANSCEIVER MODULE manufacturer & supplier, solves compatibility headaches for network buyers. Shop Cisco GLC-BX120-D compatible BiDi transceiver module, 1000BASE-BX-D Tx1550nm/Rx1490nm simplex LC, 120km over OS1/OS2 single mode fiber. Bulk wholesale BIDI TRANSCEIVER MODULE with custom EEPROM programming, OEM & private label for global network distributors and system integrators.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco GLC-BX120-D
2 Juniper  SFP-GE120KT15R14  
3 Brocade E1MG-1G-BXD-120 
4 Dell  SFP-GE-BX120D-1490 
5 Extreme MGBIC-BX120-D 
6 H3C   SFP-GE-120-SM1550-A 
7 HPE H3C   SFP-1G-BXD-120 
8 Netgear  SFP-GE-BX120-D
Description

Cisco GLC-BX120-D Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE 


Product Overview

HYTOPTODEVICE is a trusted BIDI TRANSCEIVER MODULE manufacturer & supplier, helping buyers resolve module compatibility and high-cost procurement pain points. This Cisco GLC-BX120-D compatible BiDi transceiver meets IEEE 802.3ah 1000BASE-BX-D standard, delivering 1.25Gbps single-fiber bidirectional transmission up to 120km over OS1/OS2 SMF with simplex LC connector (Tx1550nm/Rx1490nm). Preloaded Cisco optimized EEPROM enables plug-and-play deployment without system alarms.

It suits metro cross-building interconnections, remote branch backhaul, dark fiber leasing services and long-distance surveillance uplinks, saving scarce fiber cores and lowering network construction expense. We supply bulk wholesale, custom EEPROM programming, OEM and private label for global distributors and system integrators purchasing BIDI TRANSCEIVER MODULE.

Key Technical Specifications

Juniper Compatible   SFP-GE120KT15R14 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength TX1550nm/RX1490nm Max Distance 120km 
Connector Simplex LC Transmitter Type 1550nm DFB
Cable Type SMF Receiver Type APD
TX Power 1~5dBm Receiver Sensitivity < -32.0dBm
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Operational Best Practices

  • Complementary Pairing: BiDi transceivers must be deployed in matched pairs (e.g., TX1490/RX1550 with TX1550/RX1490). Mismatched wavelengths cannot establish a link.

  • Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF.

  • Connector Match: Simplex LC (UPC/PC polish only). Do NOT use Duplex LC or APC.

  • Laser Safety: Class 1 Laser. Never look directly into optical ports or fiber end-faces.

  • ESD Safety: Wear an anti-static wrist strap before handling the transceiver.

  • Cleanliness & Dust: Keep dust caps installed on all unused ports. Clean fiber connectors with an optical cleaning pen before insertion; dust causes over 80% of link failures.

  • Optical Attenuator Required: For short-distance testing or links (<20 km), connect a 10dB–15dB attenuator to the RX port to prevent receiver damage.

  • Installation & Hot-Swap: MSA compliant. Insert and remove gently without powering down the device.

  • High Loss / Packet Drops: Ensure fiber bend radius exceeds 30 mm, inspect optical power levels, and clean connectors.

  • No Link: Verify complementary BIDI wavelength pairing requirement; clean Simplex LC end-faces; check port speed configuration.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices


1. Supported Hardware & Firmware

This GLC-BX120-U compatible BiDi SFP transceiver uses Cisco tuned EEPROM to eliminate unsupported transceiver alerts and runs reliably with Cisco IOS/IOS-XE firmware.
● Cisco Enterprise Switches & Routers
 ○ Catalyst 9000, 3650, 3850, 2960 series
 ○ ISR 4000, ASR 1000 router platforms
● General Cisco hardware
 ○ All Cisco network devices with standard gigabit SFP ports supporting 1.25G rate

2. Multi-Brand Cross Compatibility

Built‑upon universal MSA hardware norms, this BiDi SFP enables cross‑vendor interoperability with Cisco, H3C, Juniper, Arista, Dell network equipment. Custom EEPROM re‑programming service is available for mixed‑vendor multi‑site SMB and enterprise networking deployments.

3. Free Value-Added Services

We provide professional customization for bulk Bidi sfp transceiver module orders, including firmware adaptation and custom labeling, meeting personalized procurement demands for compatible optical modules.

Primary Application Scenarios

● Single-fiber point-to-point inter-switch links for metro enterprise networks
● Cross-town gigabit interconnection with limited available fiber pairs
● Remote branch office long-haul backhaul over leased dark fiber lines
● Extra-long-distance uplink for distributed IP camera monitoring systems
● Metro network upgrade projects with constrained fiber infrastructure


Connectivity Solutions (Applications)

1.1GbE Switch-to-Switch Connectivity
HYTOPTODEVICE BiDi  transceiver MODULE for single‑fiber point‑to‑point enterprise deployment
2.1GbE Switch to Media Converter Connectivity
HYTOPTODEVICE 120km BiDi transceiver MODULE for campus long‑haul gigabit inter‑building links
3.1G Structured Cabling
HYTOPTODEVICE single strand BIDI SFP module for ISP FTTH and remote branch backhaul


Core Product Features

1. BiDi SFP: Maximizing Fiber Efficiency

Replaces traditional dual-fiber setups with single-strand WDM multiplexing, fully unlocking unused fiber capacity and streamlining bulk network upgrades.
hytoptodevice 120km single fiber BiDi optic, reliable manufacturer for bidi transceiver module

2.Double Your Capacity, Zero Extra Cabling

Transmit and receive on a single strand. By leveraging integrated WDM technology, this BiDi SFP module eliminates redundant wiring and slashes expansion costs for Cisco campus networks.

Tx1550 Rx1490 simplex LC bidi transceiver module from hytoptodevice

3. Efficient 1G Ethernet, Half the Fiber

Maximize data center efficiency. Delivers reliable Gigabit performance while lowering power consumption and halving fiber strand requirements.

hytoptodevice bulk wholesale BIDI transceiver MODULE with low power consumption and high-efficiency

4. Plug-and-Play Guaranteed Compatibility

Factory pre-programmed Cisco-compatible EEPROM suppresses third-party transceiver warning alerts. Hot swap works directly on supported switches without complex CLI configuration; custom EEPROM can be arranged for bulk orders to resolve compatibility pain points.Specific Compatibility Video available upon request.

HYTOPTODEVICE compatible  bidi transceiver module 120km SMF

5. 100% Tested, Zero-Defect Guaranteed
Maximum network uptime, zero surprises. Every BIDI SFP module undergoes rigorous physical testing in our Test Center before shipping to deliver rock-solid reliability out of the box.

HYTOPTODEVICE BiDi transceiver module full aging test for stable 120km single‑fiber operation


Frequently Asked Questions 

Q1: Can I buy this simplex BIDI TRANSCEIVER MODULE and install it into Cisco 10G SFP+ switch ports?

A: Yes, this HYTOPTODEVICE BIDI TRANSCEIVER MODULE works on most SFP+ ports, but manually set port speed to 1Gbps. SFP+ ports support SFP backward compatibility, auto negotiation cannot downshift automatically from 10G to 1G.

Q2: What if I purchase this 120km BiDi optic and need 100Mbps speed for old legacy network hardware?

A: This HYTOPTODEVICE BIDI TRANSCEIVER MODULE supports speed auto-adaptation, yet it is not recommended. Certain switch models may encounter compatibility mismatches and trigger unexpected link anomalies when running at lower speeds.

Q3: What pain points will I meet if my Cisco switch cannot identify purchased BIDI TRANSCEIVER MODULE?

A: Firmware updates are normally unnecessary for this HYTOPTODEVICE BIDI TRANSCEIVER MODULE. Our pre-calibrated EEPROM matches Cisco hardware; only very old IOS firmware may trigger module unrecognized warnings.

Q4: Do I need to buy matched wavelength pairs when ordering BIDI TRANSCEIVER MODULE for single fiber links?

A: Yes, BiDi communication requires paired transceivers with complementary wavelengths. This Tx1550/Rx1490 transceiver must pair with Tx1490/Rx1550 module on the opposite fiber end to build a working single-fiber connection.

Q5: Is it a common deployment mistake to connect a BIDI TRANSCEIVER MODULE to duplex dual-fiber SFP with a fiber splitter?

A: No, this setup cannot establish a stable network link. BiDi uses wavelength multiplexing over one fiber core while duplex SFP transmits and receives over separate fibers; wavelength mismatch blocks normal data transfer.

Q6: What receiver component comes inside the 120km long range BIDI TRANSCEIVER MODULE for my network project?

A: This HYTOPTODEVICE 120km BIDI TRANSCEIVER MODULE adopts APD receiver. APD delivers much higher receiving sensitivity than PIN diodes, which is essential to achieve 120km long-reach single-mode fiber transmission.

Q7: Do I need to purchase optical attenuators when deploying a BIDI TRANSCEIVER MODULE on short fiber spans?

A: Attenuators are required for fiber links shorter than 30km. High launch power of 120km optics will overload APD receiver over short distances; use 10~15dB attenuator to protect the optical receiver.

Q8: Will old fiber splice loss reduce the maximum link distance after I install the purchased BIDI TRANSCEIVER MODULE?

A: Yes, aged G.652 fiber with high loss or splice loss will shorten maximum working distance. Extra attenuation from old fiber reduces optical power budget and may break the 120km link margin.

Q9: What signal degradation risks should I know for 120km point-to-point links when sourcing BIDI TRANSCEIVER MODULE?

A: Chromatic dispersion has limited impact at 1.25G speed over 120km. Low gigabit rate is less sensitive to dispersion, but excessive dispersion will widen optical pulses and cause bit errors at the maximum 120km distance.

Q10: Why do Cisco switches show wrong DDM power readings after installing bought BIDI TRANSCEIVER MODULE?

A: BiDi wavelength filtering causes occasional DDM reading deviation. The reported RX power may be slightly inaccurate on some switch platforms, even if the actual fiber link remains stable.

Q11: Is overheating a common issue for bulk purchased 120km BIDI TRANSCEIVER MODULE in crowded switch racks?

A: Yes, long-reach 120km BiDi transceivers generate slightly more heat. However, HYTOPTODEVICE BIDI TRANSCEIVER MODULE features optimized power consumption design, and thermal output is barely noticeable under normal operation, compared to low-power 10km short-range SFP transceivers.

Q12: What lifespan risk will high cabinet temperature bring to my purchased BIDI TRANSCEIVER MODULE?

A: Yes, continuous high operating temperature accelerates laser aging. HYTOPTODEVICE BIDI TRANSCEIVER MODULE passes temperature burn-in test, but prolonged over-temperature operation will reduce the service life of DFB laser and APD receiver.

Q13: What power budget planning should I do before buying multiple BIDI TRANSCEIVER MODULE to fill all Cisco SFP slots?

A: Most modern enterprise switch power supplies support full populated ports. Each HYTOPTODEVICE BIDI TRANSCEIVER MODULE consumes ≤1W, you still need to calculate total power budget when fully filling all SFP slots.

Q14: Does HYTOPTODEVICE test each BIDI TRANSCEIVER MODULE before delivery to avoid bulk order quality issues?

A: Yes, every HYTOPTODEVICE BIDI TRANSCEIVER MODULE undergoes independent optical testing before shipment. We test optical power, sensitivity and link performance to guarantee 120km reach performance for bulk orders.

Q15: Are these wholesale BIDI TRANSCEIVER MODULE RoHS and MSA certified for global project procurement?

A: Yes, all HYTOPTODEVICE BIDI TRANSCEIVER MODULE follow SFP MSA specifications and RoHS compliance. Standardized design ensures mechanical and electrical interoperability with most brand network hardware.

Packaging & Custom OEM Solutions

Individually sealed in ESD-safe packaging and ready to ship. We offer tailored OEM solutions—including custom logos and private labeling—to support high-volume distributors,wholesaler and system integrators.
HYTOPTODEVICE sfp-10g-sr optical transceiver module custom package

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% hardware-tested compatibility with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Full product range coverage:1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T
  • In-stock supply & fast global shipping, average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.
  • Private Label support - EEPROM / firmware customization support

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • Juniper SFP-GE120KT15R14 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE
  • Juniper SFP-GE120KT15R14 Compatible BiDi Transceiver Module 120km | 1000BASE-BX-D Tx1550Rx1490 Simplex LC Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 120km SMF 1.25G
  • hytoptodevice offer 1000BASE-BX-U bidi transceiver 120km SMF 1.25g

Download