• Factory wholesale compatible SFP module for Juniper long-distance single-mode fiber networking and bulk project procurement
  • HYTOPTODEVICE High-stability 100M 40km single-mode optical transceiver for H3C switch and router long-range fiber uplink
  • Tender-qualified 100BASE-EX transceiver with real-time DDM diagnosis for long-distance campus and WAN network deployment
  • hytoptodevice 100base-ex single-mode SFP module factory wholesale, stable inventory for network integrators and long-term distributors
  • Factory wholesale compatible SFP module for Juniper long-distance single-mode fiber networking and bulk project procurement
  • HYTOPTODEVICE High-stability 100M 40km single-mode optical transceiver for H3C switch and router long-range fiber uplink
  • Tender-qualified 100BASE-EX transceiver with real-time DDM diagnosis for long-distance campus and WAN network deployment
  • hytoptodevice 100base-ex single-mode SFP module factory wholesale, stable inventory for network integrators and long-term distributors

Juniper EX-SFP-1FE-LX40K Compatible 100M SFP Transceiver | 100BASE-EX 1310nm 40km Bulk Wholesale | HYTOPTODEVICE

Buy high-quality Juniper EX-SFP-1FE-LX40K compatible SFP transceiver at factory price. This 100BASE-EX 1310nm 40km single-mode SFP transceiver supports DDM monitoring, ideal for global distributor wholesale and enterprise bulk SFP transceiver procurement. Stable 100Mbps long-distance fiber links for Juniper network deployment. 
NO. Brand  Compatible P/N Remarks
1 Cisco  GLC-FE-100EX 
2 H3C  SFP-FE-LH40-SM1310
3 HPE(H3C)  JD090A
4 Juniper  EX-SFP-1FE-LX40K
5 Brocade  E1MG-100FX-LR-OM
6 Dell GP-SFP2-1E-C 
7 Extreme Networks  MGBIC-LX-40
8 Foundry Networks  E1MG-100FX-LR
Description

Bulk Wholesale Juniper EX-SFP-1FE-LX40K Compatible 100BASE-EX SFP Module, 1310nm 40km SMF Factory Supply | HYTOPTODEVICE

Product Overview

The HYTOPTODEVICE EX-SFP-1FE-LX40K Compatible SFP Transceiver is a hot-swappable, MSA-compliant optical transceiver designed for full compatibility with Juniper network devices. Featuring a 1310nm FP laser and PIN receiver, it delivers stable 100Mbps Fast Ethernet transmission over up to 40km on standard single-mode fiber via Duplex LC connectors. Each SFP transceiver is factory-calibrated and fully tested to ensure zero-alarm plug-and-play operation on Juniper switches and routers.
Built with low power consumption and DDM monitoring support, this 100BASE-EX SFP transceiver guarantees reliable long-distance fiber connectivity for enterprise LAN, WAN and campus networking. It serves as a cost-effective solution for SFP transceiver wholesale, bulk enterprise procurement and legacy Juniper network upgrades.

Key Technical Specifications

Juniper Compatible      EX-SFP-1FE-LX40K  Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 100Mbps
Wavelength 1310nm Max  Distance 40KM
Connector Duplex LC Transmitter Type FP 1310nm
Cable Type SMF Receiver Type PIN
TX Power -8~-2dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤1W Receiver Overload -8.0dBm
Protocols IEEE802.3ab, GR-468, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Port Matching

    Use standard G.652.D duplex single-mode fiber (SMF) with LC-PC/UPC connectors. Multimode fiber is not supported and will fail to reach 40km. Ensure the SFP port supports 100Mbps mode before insertion.

  • Installation & Hot-Swap Rules

    Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.

  • Link Loss Budget

    Offers a 24dB link budget for 40km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.

  • Operating Environment

    Commercial grade: 0°C to 70°C in indoor environments. Keep away from extreme heat, moisture, and dust for long-term stability.

  • Real-Time Monitoring (DDM)

    Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.

  • Optical Attenuation (Crucial)

    Never direct-connect! Since Tx reaches up to -2 dBm, install a 5–10 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -8 dBm and prevent receiver burnout.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
This EX-SFP-1FE-LX40K compatible SFP transceiver adopts customized firmware matching Juniper official authentication rules. It delivers plug-and-play, zero-alarm and zero-log operation on mainstream Juniper network devices. It is a reliable SFP transceiver choice for enterprise network upgrades and distributor bulk resale.
  • Juniper EX2200 / EX3300 / EX3400 / EX4300 / EX4600 Series Enterprise Switches
  • Juniper MX Series Enterprise Routers & Security Gateways
  • Juniper QFX Series enterprise aggregation network devices
  • All Juniper equipment with 100M/1G dual-rate SFP ports supporting 100BASE-EX SFP transceiver standard

2. Multi-Brand Cross Compatibility

This SFP Module complies with universal MSA standards for stable multi-brand interoperation. Custom firmware is available for mixed-vendor network SFP Module bulk deployment and procurement

3. Free Value-Added Services

We offer exclusive free value-added services for all  sfp modules  to reduce your project deployment and maintenance costs.
  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Cost-effective wholesale for large-scale deployment
  • Free custom EEPROM programming for special and legacy network environments

Primary Application Scenarios

  • Cross-building, campus and enterprise 100Mbps long-distance fiber links with EX-SFP-1FE-LX40K SFP transceiver
  • Enterprise WAN remote interconnection and branch office networking using 100BASE-EX SFP transceiver
  • Legacy Juniper fast Ethernet network renovation and SFP transceiver batch replacement
  • ISP fast Ethernet links, enterprise LAN/SAN and data center optical networking SFP transceiver solution
  • Long-distance structured cabling projects for enterprises and SFP transceiver bulk supply for integrators
Connectivity Solutions(Applications)

Deploy paired Juniper compatible SFP Module with G.652.D single-mode fiber to establish stable 40km 100Mbps point-to-point links for campus and enterprise network construction.

Hytoptodevice Stable 100Mbps 40km single-mode sfp transceiver module for fiber links for campus and park long-distance network deployment

The Core Feature

1. Low-Power Data Center Efficient Connectivity

With ultra-low power consumption below 1W, this 100BASE-EX SFP Module provides stable, cost-effective Fast Ethernet connectivity. It is an economical solution for  enterprise LAN, SAN and data center Ethernet applications. 

cost-effective 100BASE-EX 40KM replacement module,factory direct SFP transceiver bulk supply


2.
Verified Host Interoperability for Devices

Every module is fully tested on target Juniper switches for reliable interoperability. Custom EEPROM firmware matches official specs, enabling plug-and-play operation with zero alarms and zero logs to cut on-site maintenance costs.
HYTOPTODEVICE Zero Alarm Plug and Play  Compatible 100M EX SFP Fiber Module

3.Rigorous Testing, Uncompromising Reliability

100% factory full testing ensures consistent batch quality. It is a high-cost-performance replacement for enterprise long-distance network bulk procurement and upgrade projects.

HYTOPTODEVICE MSA Compliant Replacement 100BASE-EX SFP Optical Transceiver Full Tested


FAQ

Q1: Can a 100BASE-EX SFP communicate directly with a 1000BASE-EX (Gigabit) SFP?
A: No, direct communication is not supported. A 100BASE-EX SFP transceiver operates at 100Mbps fast Ethernet speed, while a 1000BASE-EX transceiver runs at 1Gbps gigabit speed. Mismatched speed specifications will cause port negotiation failure, link flapping and no-data transmission. To build a stable fiber link, both ends must deploy identical speed SFP transceivers.

Q2: Why is the link light off and the port failing to come UP after insertion?
A: Common causes include mismatched transceiver speed/wavelength, incorrect fiber type, dirty Duplex LC connectors, port shutdown on Juniper devices, faulty fiber cabling, or incompatible EEPROM firmware. Our EX-SFP-1FE-LX40K SFP transceiver features full Juniper compatibility, eliminating firmware authentication failures. Basic troubleshooting includes cleaning port connectors, verifying single-mode fiber usage, and matching transceiver parameters on both link ends.

Q3: Is an optical attenuator required for short-distance testing or links?
A: Yes, a 5-10dB optical attenuator is mandatory for short-distance links within 1km. This 40km 100BASE-EX SFP transceiver has high transmit optical power (-8~-2dBm) designed for long-haul fiber loss compensation. Zero-loss short links will cause receiver overload, signal distortion, or permanent transceiver damage without an attenuator.

Q4: Can a 100BASE-EX (40km) transceiver be mixed with a 100BASE-LX (10km) transceiver?
A: Yes, they can establish basic link communication, as both transceivers adopt 1310nm wavelength and 100Mbps speed. However, mixed deployment is not recommended for formal projects. The mismatched power budget and sensitivity will cause unstable optical power margins, leading to occasional packet loss, high bit error rates and poor long-term link reliability.

Q5: What type of laser is used in a 100BASE-EX transceiver?
A: Our Juniper EX-SFP-1FE-LX40K compatible 100BASE-EX SFP transceiver adopts a professional FP laser + PIN receiver solution. The FP laser ensures stable 1310nm wavelength output, perfectly matching 40km single-mode fiber transmission requirements, with low power consumption and excellent long-distance signal stability.

Q6: Is there a BiDi (Single-Strand Fiber) version of 100BASE-EX available?
A: Yes. While standard 100BASE-EX SFP transceivers adopt duplex dual-fiber transmission, there is a compatible BiDi single-strand fiber solution (100BASE-BX40). It works in matched pairs with complementary wavelengths (Tx1310nm/Rx1550nm and Tx1550nm/Rx1310nm), supporting 40km long-distance transmission via only one single-mode fiber strand for fiber-saving networking deployment.

Q7: What is considered a normal Rx power reading in DDM?
A: For this 100BASE-EX 40km SFP transceiver, the normal DDM Rx power range is-32dBm ~ -8dBm. The optimal working range is -20dBm ~ -10dBm with sufficient power margin. Readings higher than -8dBm cause receiver overload, while readings lower than -32dBm result in weak signal and packet loss.

Q8: Is 100BASE-EX available in Industrial Temperature ranges?
A: Our standard EX-SFP-1FE-LX40K SFP transceiver supports commercial temperature range of 0°C to 70°C for conventional enterprise and data center deployment. Industrial temperature (-40°C ~ 85°C) versions are available on customized order, suitable for outdoor cabinets, industrial parks and harsh environment networking scenarios.

Q9: What happens if the transceiver operates in extreme heat or cold?
A: Operating beyond the standard temperature range will lead to unstable laser output power, reduced receiver sensitivity, increased bit error rates, and intermittent link flapping. Long-term extreme temperature operation will accelerate component aging and permanently damage the SFP transceiver. Strict temperature compliance ensures long-term stable link operation.

Q10: Are 100BASE-EX SFP modules hot-swappable?
A: Yes. This EX-SFP-1FE-LX40K SFP transceiver complies with MSA industry standards and supports hot-swappable plug-and-play. It can be inserted or removed without powering down the switch or router device, effectively reducing network maintenance downtime and simplifying on-site upgrade operations.

Q11: What are the quick troubleshooting steps if a link fails to establish?
A: 1. Confirm both ends use 100BASE-EX identical SFP transceivers and 1310nm wavelength; 2. Verify G.652/G.657 single-mode fiber is used and replace faulty fiber jumpers; 3. Clean Duplex LC connectors and device port interfaces; 4. Check DDM optical power values to exclude overload or weak signals; 5. Manually lock port speed/duplex mode to avoid negotiation errors; 6. Test with a new SFP transceiver to rule out hardware failure.

Q12: Why are third-party compatible 100BASE-EX modules much cheaper than OEM modules?
A: Third-party compatible SFP transceivers eliminate OEM brand premium, patent authorization fees and channel markup costs. HYTOPTODEVICE adopts standardized industrial production, batch calibration and full aging testing, providing fully Juniper-compatible EX-SFP-1FE-LX40K SFP transceivers with identical optical performance and stability at factory direct wholesale prices, delivering high cost performance for enterprise bulk procurement and network upgrades.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • Factory wholesale compatible SFP module for Juniper long-distance single-mode fiber networking and bulk project procurement
  • HYTOPTODEVICE High-stability 100M 40km single-mode optical transceiver for H3C switch and router long-range fiber uplink
  • Tender-qualified 100BASE-EX transceiver with real-time DDM diagnosis for long-distance campus and WAN network deployment
  • hytoptodevice 100base-ex single-mode SFP module factory wholesale, stable inventory for network integrators and long-term distributors

Download