• Wholesale Juniper compatible 100BASE-FX multimode SFP transceiver for enterprise bulk procurement
  • Bulk purchase 100Mbps multimode fiber SFP module for Juniper legacy network upgrade project
  • Project tender available 100BASE-FX SFP transceiver with real-time DDM optical diagnosis function
  • Factory direct supplier 2km 1310nm MMF SFP transceiver for Juniper enterprise network deployment
  • Wholesale Juniper compatible 100BASE-FX multimode SFP transceiver for enterprise bulk procurement
  • Bulk purchase 100Mbps multimode fiber SFP module for Juniper legacy network upgrade project
  • Project tender available 100BASE-FX SFP transceiver with real-time DDM optical diagnosis function
  • Factory direct supplier 2km 1310nm MMF SFP transceiver for Juniper enterprise network deployment

 Juniper EX-SFP-1FE-FX Compatible 100BASE-FX SFP Transceiver | 1310nm 2km MMF Bulk Factory Wholesale | HYTOPTODEVICE

Reliable factory supplier of Juniper EX-SFP-1FE-FX compatible 100BASE-FX SFP transceivers. 1310nm 2km multimode fiber SFP module with DDM monitoring. Support enterprise bulk purchase, project tender procurement and large-scale network upgrade wholesale. 
NO. Brand  Compatible P/N Remarks
1 Cisco  GLC-FE-100FX-RGD  IND
2 Cisco GLC-FE-100FX
3 Brocade  E1MG-100FX-OM 
4 Juniper  EX-SFP-1FE-FX 
5 H3C  SFP-FE-SX-MM1310-A 
6 HPE(H3C)  JD102A
7 HPE(Procurve)  J9054B
8 Palo Alto Networks  PAN-SFP-100BASE-FX
9 Extreme MGBIC-LC04
10 D-Link DEM-211 IND
Description
 Juniper EX-SFP-1FE-FX Compatible 100BASE-FX SFP Transceiver | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE Juniper EX-SFP-1FE-FX compatible SFP transceiver is a standard plug-and-play replacement for original Juniper modules. Adopting 1310nm FP laser, this 100BASE-FX MMF SFP delivers stable 100Mbps transmission up to 2km over OM1/OM2 multimode fiber, fully matching official Juniper optical and electrical specifications.
Pre-flashed optimized EEPROM firmware ensures zero-alarm operation on Juniper switches with no manual configuration needed. Factory-calibrated and rigorously tested for consistent batch quality, our modules are cost-effective for enterprise network upgrades, campus cabling, project tender procurement and large-scale bulk wholesale.

Key Technical Specifications

 Juniper Compatible  EX-SFP-1FE-FX Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 100Mbps
Wavelength 1310nm Max  Distance 2KM
Connector Duplex LC Transmitter Type FP 1310nm
Cable Type MMF Receiver Type PIN
TX Power -18~-10dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤1W Receiver Overload -8.0dBm
Protocols IEEE802.3ab, GR-468, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Port Matching

    Use standard 50/125µm or 62.5/125µm duplex multimode fiber (MMF) with LC-PC/UPC connectors. Single-mode fiber is not supported and will fail to reach 2km. Ensure the SFP port supports 100Mbps mode before insertion.

  • Installation & Hot-Swap Rules

    Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.

  • Link Loss Budget

    Offers a 6–11dB link budget for 2km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.

  • Operating Environment

    Commercial grade: 0°C to 70°C in indoor environments. For outdoor, high temperature, or harsh environments, select Industrial Grade (-40°C to 85°C). Keep away from extreme moisture and dust for long-term stability.

  • Real-Time Monitoring (DDM)

    Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.

  • Bulk Deployment

    Standardize fiber types and port settings across enterprise LAN or industrial networks for consistent performance.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Specially calibrated firmware matches Juniper official authentication protocols, achieving zero-warning, zero-log stable operation on all Juniper Fast Ethernet switching devices. Suitable for enterprise batch replacement and large-scale network project procurement without port mismatch or system alarm issues.
  • Juniper EX Series Enterprise Switches
  • Juniper MX Series Routers
  • Juniper M Series & T Series Network Platforms
  • Universal 100M/1G dual-rate SFP port Juniper network devices

2. Multi-Brand Cross Compatibility

This 100BASE-FX SFP transceiver complies with global MSA industry standards, supporting stable interconnection with mainstream brand network devices. Custom firmware is available for mixed-vendor multimode fiber network batch deployment.

3. Free Value-Added Services

We offer exclusive free value-added services for all  sfp optical transceivers  to reduce your project deployment and maintenance costs.
  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Cost-effective wholesale for large-scale deployment
  • Free custom EEPROM programming for special and legacy network environments

Primary Application Scenarios

  • Enterprise indoor 2km short-distance multimode fiber interconnection
  • Office building cross-room and floor 100Mbps fiber link construction
  • Legacy Juniper Fast Ethernet multimode network SFP module replacement
  • Campus, factory and monitoring system short-range fiber transmission
  • Bulk upgrade and reconstruction of old multimode fiber network links

Connectivity Solutions(Applications)

1.100BASE to 100BASE for Switch-Switch
Pair Juniper compatible 100BASE-FX SFP module with OM1/OM2/OM3/OM4 multimode fiber to build 100Mbps point-to-point fiber links up to 2km, ideal for indoor switch interconnection in offices and campuses.

Stable 100Mbps multimode fiber interconnection for campus and enterprise batch network deployment

2.100BASE to 100BASE for Switch-Media Converter

Use 1310nm 2km MMF multimode transceiver on switches with a 100BASE-FX media converter to realize optical-to-electrical conversion, enabling RJ45 legacy devices to join fiber network smoothly.
100BASE-FX Switch to Media Converter: Flexible optical-electrical conversion for engineering diversified network access

3.100BASE Structured Cabling

Deploy third-party compatible  SFP transceivers as standard fiber access ports for enterprise layered structured cabling, realizing unified, scalable 100Mbps multimode fiber network deployment.
HYTOPTODEVICE  100BASE-FX Structured Cabling: Standardized multimode wiring for enterprise unified network renovation and bulk procurement projects

The Core Feature

1. Low-Power Data Center Efficient Connectivity

With ultra-low power consumption below 1W, this 100BASE-FX SFP provides stable, cost-effective Fast Ethernet connectivity. It is an economical solution for data center, campus and enterprise low-speed access networking.

Low Latency 2km 1310nm MMF SFP Module for  Legacy Network Renovation


2.
Verified Host Interoperability for Devices

Pre-flashed EEPROM supports hot-swap plug-and-play. The module is fully recognized by mainstream devices without alarms or configuration adjustments, enabling seamless network replacement and upgrade.
Zero-Alarm Plug and Play 100BASE-FX SFP Transceiver for Fast Ethernet Devices

3.Rigorous Testing, Uncompromising Reliability

100% factory tested and aged SFP transceiver with uniform batch quality, ideal for large-scale replacement and bulk procurement of Cisco multimode fiber modules.

Factory Tested 100BASE-FX MMF SFP Module for Enterprise Bulk Procurement Projects


FAQ

Q1: Is this 100BASE-FX SFP module compatible with Juniper and other brand network switches?
A: Yes. HYTOPTODEVICE 100BASE-FX SFP fully complies with MSA standards and works plug-and-play with Juniper, Cisco, HP, Aruba and multi-brand switches. Ideal for mixed-brand enterprise bulk network deployment and project renovation.

Q2: Can this 100Mbps FX SFP module work in gigabit SFP ports or 10G SFP+ slots?
A: It works on 1G/100M dual-rate SFP slots with automatic 100Mbps downgrade. It cannot be used on dedicated 10G SFP+ ports. Perfect for legacy Juniper network upgrade and batch replacement projects.

Q3: Why does my Juniper switch report unsupported transceiver errors with third-party modules?
A: Unsupported transceiver errors stem from mismatched EEPROM firmware. HYTOPTODEVICE preloads Juniper EX-SFP-1FE-FX matched firmware to ensure zero-alarm, zero-log operation for formal project tender delivery.

Q4: Does 100BASE-FX fiber optic module support port auto-negotiation?
A: 100BASE-FX does NOT support auto-negotiation. This HYTOPTODEVICE Juniper compatible SFP runs fixed 100Mbps full-duplex. Manually force port speed to 100Mbps full duplex to avoid link flapping in multimode fiber projects.

Q5: What types of multimode fiber cables are compatible with this 100BASE-FX SFP transceiver?
A: Optimized for OM1 and OM2 multimode fiber for full 2km stable transmission. It supports short-distance deployment on OM3/OM4 fiber, adapting to diverse enterprise existing wiring bulk upgrade scenarios.

Q6: Is it possible to run 100BASE-FX SFP on single-mode fiber links?
A: No. This is a dedicated multimode 100BASE-FX SFP module. Single-mode fiber causes severe signal attenuation and link down. HYTOPTODEVICE standardizes module selection to prevent project configuration errors.

Q7: Which fiber connector type is suitable for 100BASE-FX multimode networking, UPC or APC?
A: Always use UPC-polished LC connectors. APC connectors trigger high reflectance and unstable multimode links. Standard UPC wiring ensures reliable operation for all batch network projects.

Q8: Are optical attenuators required for short-distance multimode fiber connections under 100m?
A: No attenuator required for fiber runs under 100 meters. HYTOPTODEVICE factory-calibrated optical power reserves sufficient margin for short and medium-distance multimode fiber transmission.

Q9: How to detect aging or performance degradation of SFP optical laser components?
A: Utilize built-in DDM monitoring on this HYTOPTODEVICE SFP. Decreased optical power or abnormal temperature/voltage indicates laser degradation, supporting proactive enterprise network operation and maintenance.

Q10: What are the practical differences between 100BASE-FX and 1000BASE-SX multimode modules?
A: 100BASE-FX delivers 100Mbps/1310nm/2km stable legacy networking. 1000BASE-SX provides gigabit high-speed transmission. HYTOPTODEVICE offers targeted modules for different project bandwidth procurement needs.

Q11: Why do 100BASE-FX modules adopt 1310nm wavelength instead of 850nm for multimode transmission?
A:1310nm wavelength lowers modal dispersion and bit error rates on multimode fiber, ensuring stable 2km transmission. It makes HYTOPTODEVICE 100BASE-FX modules ideal for enterprise long-distance structured wiring projects.

Q12: Are these Juniper compatible SFP modules equipped with ESD electrostatic protection?
A: Yes. All HYTOPTODEVICE Juniper compatible SFP transceivers integrate professional ESD protection circuits to prevent static damage during hot-swap and on-site engineering deployment.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • Wholesale Juniper compatible 100BASE-FX multimode SFP transceiver for enterprise bulk procurement
  • Bulk purchase 100Mbps multimode fiber SFP module for Juniper legacy network upgrade project
  • Project tender available 100BASE-FX SFP transceiver with real-time DDM optical diagnosis function
  • Factory direct supplier 2km 1310nm MMF SFP transceiver for Juniper enterprise network deployment

Download