• Wholesale HPE(H3C) compatible 100BASE-FX multimode SFP transceiver for enterprise bulk procurement
  • Bulk purchase 100Mbps multimode fiber SFP module for HPE(H3C) legacy network upgrade project
  • Project tender available 100BASE-FX SFP transceiver with real-time DDM optical diagnosis function
  • Factory direct supplier 2km 1310nm MMF SFP transceiver for HPE(H3C) enterprise network deployment
  • Wholesale HPE(H3C) compatible 100BASE-FX multimode SFP transceiver for enterprise bulk procurement
  • Bulk purchase 100Mbps multimode fiber SFP module for HPE(H3C) legacy network upgrade project
  • Project tender available 100BASE-FX SFP transceiver with real-time DDM optical diagnosis function
  • Factory direct supplier 2km 1310nm MMF SFP transceiver for HPE(H3C) enterprise network deployment

HPE(Procure)  J9054B  Compatible 100BASE-FX SFP Transceiver | 1310nm 2km MMF Bulk Factory Wholesale | HYTOPTODEVICE

Professional factory wholesale HPE Procure J9054B compatible 100BASE-FX SFP transceiver. High-quality 1310nm 2km MMF SFP transceiver with DDM function. Best cost-effective SFP transceiver for enterprise bulk procurement, distributor wholesale and network engineering project purchase. 
NO. Brand  Compatible P/N Remarks
1 Cisco  GLC-FE-100FX-RGD  IND
2 Cisco GLC-FE-100FX
3 Brocade  E1MG-100FX-OM 
4 Juniper  EX-SFP-1FE-FX 
5 H3C  SFP-FE-SX-MM1310-A 
6 HPE(H3C)  JD102A
7 HPE(Procurve)  J9054B
8 Palo Alto Networks  PAN-SFP-100BASE-FX
9 Extreme MGBIC-LC04
10 D-Link DEM-211 IND
Description

HPE(Procure)  J9054B   Compatible 100BASE-FX SFP Transceiver | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE HPE Procure J9054B compatible SFP transceiver is a fully matched plug-and-play replacement SFP transceiver for original HPE devices. Adopting industrial-grade 1310nm FP laser, this 100BASE-FX MMF SFP transceiver delivers steady 100Mbps transmission up to 2km over standard OM1/OM2 multimode fiber, strictly compliant with HPE official electrical and optical parameters.
Pre-calibrated professional EEPROM firmware enables zero-alarm and zero-log operation on all HPE Procure switches without manual configuration. As a professional SFP transceiver factory supplier, we provide batch-tested, cost-effective SFP transceivers, perfect for distributor wholesale, enterprise bulk procurement, campus network renovation and engineering tender projects.

Key Technical Specifications

HPE(Procure)  Compatible      J9054B  Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 100Mbps
Wavelength 1310nm Max  Distance 2KM
Connector Duplex LC Transmitter Type FP 1310nm
Cable Type MMF Receiver Type PIN
TX Power -18~-10dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤1W Receiver Overload -8.0dBm
Protocols IEEE802.3ab, GR-468, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Port Matching

    Use standard 50/125µm or 62.5/125µm duplex multimode fiber (MMF) with LC-PC/UPC connectors. Single-mode fiber is not supported and will fail to reach 2km. Ensure the SFP port supports 100Mbps mode before insertion.

  • Installation & Hot-Swap Rules

    Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.

  • Link Loss Budget

    Offers a 6–11dB link budget for 2km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.

  • Operating Environment

    Commercial grade: 0°C to 70°C in indoor environments. For outdoor, high temperature, or harsh environments, select Industrial Grade (-40°C to 85°C). Keep away from extreme moisture and dust for long-term stability.

  • Real-Time Monitoring (DDM)

    Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.

  • Bulk Deployment

    Standardize fiber types and port settings across enterprise LAN or industrial networks for consistent performance.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
This customized J9054B SFP transceiver adopts exclusive tuned firmware to match HPE Procure authentication protocols, achieving zero-alarm, zero-log stable operation on all HPE Procure switching and routing devices. It is the preferred SFP transceiver for distributor bulk supply and enterprise large-scale network replacement projects.
  • HPE Procure Enterprise Fast Ethernet Switches
  • HPE OfficeConnect & FlexNetwork Series Network Devices
  • HPE Procure Multi-service Router SFP Ports
  • All HPE 100M/1G dual-rate SFP port network equipment

2. Multi-Brand Cross Compatibility

This 100BASE-FX SFP transceiver complies with global MSA industry standards, supporting stable interconnection with mainstream brand network devices. Custom firmware is available for mixed-vendor multimode fiber network batch deployment.

3. Free Value-Added Services

We offer exclusive free value-added services for all  sfp optical transceivers  to reduce your project deployment and maintenance costs.
  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Cost-effective wholesale for large-scale deployment
  • Free custom EEPROM programming for special and legacy network environments

Primary Application Scenarios

  • Enterprise indoor 2km short-distance multimode fiber interconnection
  • Office building cross-room and floor 100Mbps fiber link construction
  • Legacy HPE Fast Ethernet multimode network SFP module replacement
  • Campus, factory and monitoring system short-range fiber transmission
  • Bulk upgrade and reconstruction of old multimode fiber network links

Connectivity Solutions(Applications)

1.100BASE to 100BASE for Switch-Switch
Pair HPE(H3C) compatible 100BASE-FX SFP module with OM1/OM2/OM3/OM4 multimode fiber to build 100Mbps point-to-point fiber links up to 2km, ideal for indoor switch interconnection in offices and campuses.

Stable 100Mbps multimode fiber interconnection for campus and enterprise batch network deployment

2.100BASE to 100BASE for Switch-Media Converter

Use 1310nm 2km MMF multimode transceiver on switches with a 100BASE-FX media converter to realize optical-to-electrical conversion, enabling RJ45 legacy devices to join fiber network smoothly.
100BASE-FX Switch to Media Converter: Flexible optical-electrical conversion for engineering diversified network access

3.100BASE Structured Cabling

Deploy third-party compatible  SFP transceivers as standard fiber access ports for enterprise layered structured cabling, realizing unified, scalable 100Mbps multimode fiber network deployment.
HYTOPTODEVICE  100BASE-FX Structured Cabling: Standardized multimode wiring for enterprise unified network renovation and bulk procurement projects

The Core Feature

1. Low-Power Data Center Efficient Connectivity

With ultra-low power consumption below 1W, this 100BASE-FX SFP provides stable, cost-effective Fast Ethernet connectivity. It is an economical solution for data center, campus and enterprise low-speed access networking.

Low Latency 2km 1310nm MMF SFP Module for  Legacy Network Renovation


2.
Verified Host Interoperability for Devices

Pre-flashed EEPROM supports hot-swap plug-and-play. The module is fully recognized by mainstream devices without alarms or configuration adjustments, enabling seamless network replacement and upgrade.
Zero-Alarm Plug and Play 100BASE-FX SFP Transceiver for Fast Ethernet Devices

3.Rigorous Testing, Uncompromising Reliability

100% factory tested and aged SFP transceiver with uniform batch quality, ideal for large-scale replacement and bulk procurement of  HPE multimode fiber modules.

Factory Tested 100BASE-FX MMF SFP Module for Enterprise Bulk Procurement Projects


FAQ

Q1: Is this J9054B SFP transceiver fully compatible with official HPE Procure network switches?
A: Yes. This HYTOPTODEVICE J9054B SFP transceiver adopts HPE-matched firmware, plug-and-play and zero-alarm on all HPE Procure devices. It is the ideal compatible SFP transceiver for enterprise bulk procurement and distributor wholesale.

Q2: Can this 100Mbps J9054B SFP transceiver run on gigabit SFP ports of HPE network devices?
A: It supports automatic 100Mbps downgrade on 1G/100M dual-rate SFP slots, incompatible with dedicated 10G SFP+ ports. Perfect for legacy HPE network upgrade and bulk SFP transceiver replacement projects.

Q3: Why do third-party SFP transceivers show unsupported errors on HPE Procure switches?
A: Unsupported errors are caused by mismatched EEPROM data. Our J9054B SFP transceiver is pre-programmed with official-matched firmware to ensure zero-error operation, fully qualified for formal project procurement and tender delivery.

Q4: Does HPE J9054B 100BASE-FX SFP transceiver support port auto-negotiation?
A: No. The 100BASE-FX standard does not support auto-negotiation. This J9054B SFP transceiver works at fixed 100Mbps full-duplex. Manually force port speed to prevent multimode fiber link flapping.

Q5: What types of multimode fiber suit this J9054B compatible SFP transceiver?
A: Optimized for OM1 and OM2 multimode fiber for full 2km stable transmission. It adapts to short-distance deployment on OM3/OM4 fiber, fitting most existing wiring bulk procurement scenarios.

Q6: Can I deploy this multimode J9054B SFP transceiver on single-mode fiber links?
A: No. This is a dedicated multimode-only SFP transceiver. Single-mode fiber causes severe signal attenuation and link downtime, avoiding configuration errors in bulk procurement projects.

Q7: Which fiber connector is suitable for J9054B 100BASE-FX SFP transceiver networking?
A: Only UPC-polished LC connectors are applicable. APC connectors cause high reflectance and unstable links. Standard UPC wiring ensures reliable operation of bulk deployed SFP transceivers.

Q8: Do short fiber links under 100 meters need optical attenuators for this SFP transceiver?
A: No attenuator is required. Factory-calibrated optical power of this J9054B SFP transceiver reserves sufficient margin for short and medium-range multimode fiber transmission.

Q9: How to detect laser aging and performance degradation of bulk purchased SFP transceivers?
A: Utilize the built-in DDM function of this J9054B SFP transceiver to monitor real-time optical power, temperature and voltage data for proactive fault judgment and maintenance.

Q10: What are the practical differences between 100BASE-FX and 1000BASE-SX SFP transceivers?
A: J9054B 100BASE-FX SFP transceiver provides stable 100Mbps/2km legacy network transmission. 1000BASE-SX SFP transceiver supports gigabit high-speed links for different bandwidth procurement needs.

Q11: Why does 100BASE-FX SFP transceiver adopt 1310nm wavelength instead of 850nm?
A: 1310nm wavelength reduces modal dispersion and bit error rates on multimode fiber, enabling stable 2km transmission, making this SFP transceiver ideal for large-scale structured wiring procurement projects.

Q12: Do wholesale J9054B SFP transceivers come with ESD electrostatic protection?
A: Yes. All HYTOPTODEVICE J9054B SFP transceivers integrate professional ESD protection circuits to prevent static damage during hot-swap and on-site engineering deployment.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • Wholesale HPE(H3C) compatible 100BASE-FX multimode SFP transceiver for enterprise bulk procurement
  • Bulk purchase 100Mbps multimode fiber SFP module for HPE(H3C) legacy network upgrade project
  • Project tender available 100BASE-FX SFP transceiver with real-time DDM optical diagnosis function
  • Factory direct supplier 2km 1310nm MMF SFP transceiver for HPE(H3C) enterprise network deployment

Download