• Factory wholesale compatible SFP module for HPE(H3C) long-distance single-mode fiber networking and bulk project procurement
  • HYTOPTODEVICE High-stability 100M 40km single-mode optical transceiver for H3C switch and router long-range fiber uplink
  • Tender-qualified 100BASE-EX transceiver with real-time DDM diagnosis for long-distance campus and WAN network deployment
  • hytoptodevice 100base-ex single-mode SFP module factory wholesale, stable inventory for network integrators and long-term distributors
  • Factory wholesale compatible SFP module for HPE(H3C) long-distance single-mode fiber networking and bulk project procurement
  • HYTOPTODEVICE High-stability 100M 40km single-mode optical transceiver for H3C switch and router long-range fiber uplink
  • Tender-qualified 100BASE-EX transceiver with real-time DDM diagnosis for long-distance campus and WAN network deployment
  • hytoptodevice 100base-ex single-mode SFP module factory wholesale, stable inventory for network integrators and long-term distributors

 HPE(H3C) JD090A Compatible 100M SFP Module | 100BASE-EX 1310nm 40km Bulk Factory Wholesale | HYTOPTODEVICE

Buy high-quality HPE(H3C) JD090A compatible SFP module at factory price. This 100BASE-EX 1310nm 40km single-mode SFP transceiver supports DDM monitoring, ideal for distributor wholesale and enterprise bulk procurement. Stable 100Mbps long-distance fiber links for HPE/H3C network deployment. 
NO. Brand  Compatible P/N Remarks
1 Cisco  GLC-FE-100EX 
2 H3C  SFP-FE-LH40-SM1310
3 HPE(H3C)  JD090A
4 Juniper  EX-SFP-1FE-LX40K
5 Brocade  E1MG-100FX-LR-OM
6 Dell GP-SFP2-1E-C 
7 Extreme Networks  MGBIC-LX-40
8 Foundry Networks  E1MG-100FX-LR
Description

Bulk Wholesale  HPE(H3C) JD090A  Compatible 100BASE-EX SFP Module, 1310nm 40km SMF Factory Supply | HYTOPTODEVICE

Product Overview
HYTOPTODEVICE HPE(H3C) JD090A compatible SFP module is a hot-swappable industrial-grade SFP transceiver for HPE and H3C network systems. Adopting mature FP laser + PIN receiver scheme, it runs at 1310nm wavelength and delivers steady 100Mbps transmission up to 40km over standard single-mode fiber via Duplex LC connectors. This standard-compliant SFP module fully matches official JD090A optical and electrical parameters.
Every SFP module undergoes independent factory testing to ensure flawless compatibility with HPE/H3C switches, routers, servers and NICs. Featuring low power consumption and plug-and-play design, this 100BASE-EX SFP transceiver fits ISP fast Ethernet links, enterprise LAN/SAN and data center networking. It is the preferred SFP module for distributor wholesale, enterprise bulk purchase and network renovation projects.

Key Technical Specifications

HPE(H3C) Compatible      JD090A  Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 100Mbps
Wavelength 1310nm Max  Distance 40KM
Connector Duplex LC Transmitter Type FP 1310nm
Cable Type SMF Receiver Type PIN
TX Power -8~-2dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤1W Receiver Overload -8.0dBm
Protocols IEEE802.3ab, GR-468, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Port Matching

    Use standard G.652.D duplex single-mode fiber (SMF) with LC-PC/UPC connectors. Multimode fiber is not supported and will fail to reach 40km. Ensure the SFP port supports 100Mbps mode before insertion.

  • Installation & Hot-Swap Rules

    Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.

  • Link Loss Budget

    Offers a 24dB link budget for 40km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.

  • Operating Environment

    Commercial grade: 0°C to 70°C in indoor environments. Keep away from extreme heat, moisture, and dust for long-term stability.

  • Real-Time Monitoring (DDM)

    Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.

  • Optical Attenuation (Crucial)

    Never direct-connect! Since Tx reaches up to -2 dBm, install a 5–10 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -8 dBm and prevent receiver burnout.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
This JD090A compatible SFP module adopts customized firmware matching HPE and H3C official authentication rules. It delivers plug-and-play, zero-alarm and zero-log operation on mainstream HPE/H3C network devices. It is a reliable SFP module choice for enterprise network upgrades and distributor bulk resale.
  • HPE/H3C S5120 / S5560 / S6520 Series Enterprise Switches, Servers & NICs
  • HPE/H3C MSR Series Enterprise Routers & Security Gateways
  • HPE FlexNetwork series switches and enterprise aggregation network devices
  • All HPE/H3C equipment with 100M/1G dual-rate SFP ports supporting 100BASE-EX SFP module standard

2. Multi-Brand Cross Compatibility

This SFP Module complies with universal MSA standards for stable multi-brand interoperation. Custom firmware is available for mixed-vendor network SFP Module bulk deployment and procurement

3. Free Value-Added Services

We offer exclusive free value-added services for all  sfp modules  to reduce your project deployment and maintenance costs.
  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Cost-effective wholesale for large-scale deployment
  • Free custom EEPROM programming for special and legacy network environments

Primary Application Scenarios

  • Cross-building, campus and enterprise 100Mbps long-distance fiber links
  • Enterprise WAN remote interconnection and branch office network deployment
  • Legacy HPE(H3C) fast Ethernet network renovation and batch module replacement
  • ISP fast Ethernet links, enterprise LAN/SAN and data center optical networking
  • Long-distance structured cabling for enterprises and system integrator bulk supply

Connectivity Solutions(Applications)

Deploy paired H3C compatible SFP Module with G.652.D single-mode fiber to establish stable 40km 100Mbps point-to-point links for campus and enterprise network construction.

Hytoptodevice Stable 100Mbps 40km single-mode sfp transceiver module for fiber links for campus and park long-distance network deployment

The Core Feature

1. Low-Power Data Center Efficient Connectivity

With ultra-low power consumption below 1W, this 100BASE-EX SFP Module provides stable, cost-effective Fast Ethernet connectivity. It is an economical solution for  enterprise LAN, SAN and data center Ethernet applications. 

cost-effective 100BASE-EX 40KM replacement module,factory direct SFP transceiver bulk supply


2.
Verified Host Interoperability for Devices

Every module is fully tested on target HPE(H3C) switches for reliable interoperability. Custom EEPROM firmware matches official specs, enabling plug-and-play operation with zero alarms and zero logs to cut on-site maintenance costs.
HYTOPTODEVICE Zero Alarm Plug and Play  Compatible 100M EX SFP Fiber Module

3.Rigorous Testing, Uncompromising Reliability

100% factory full testing ensures consistent batch quality. It is a high-cost-performance replacement for enterprise long-distance network bulk procurement and upgrade projects.

HYTOPTODEVICE MSA Compliant Replacement 100BASE-EX SFP Optical Transceiver Full Tested


FAQ

Q1: Can HYTOPTODEVICE HPE H3C JD090A 100BASE-EX SFP module run on 10G/40G switch ports with reduced speed?
A: This JD090A SFP module only works on 100M/1G dual-rate SFP ports with speed adaptation. It cannot operate on 10G/40G dedicated ports due to different hardware protocols. Our calibrated SFP module ensures stable low-speed operation on all mainstream HPE/H3C enterprise switches.

Q2: Why do generic SFP modules trigger “Unsupported Transceiver” alarms on HPE H3C devices?
A: Most third-party SFP modules cause device alarms due to mismatched EEPROM data. HYTOPTODEVICE JD090A SFP module uses HPE/H3C-tailored firmware to pass official authentication, achieving zero-alarm plug-and-play performance for bulk SFP module deployment.

Q3: Can 100BASE-EX JD090A SFP module communicate directly with 1000BASE-EX gigabit SFP transceiver?
A: Cross-speed direct communication is not supported. Both link ends must adopt matched-speed SFP modules to avoid negotiation failure and link flapping. Unified SFP module specification is essential for stable long-distance fiber networking.

Q4: Can HYTOPTODEVICE JD090A SFP module deliver reliable full 40km long-distance transmission?
A: Yes. Our JD090A 100BASE-EX SFP module supports stable full 40km transmission over standard single-mode fiber. Every SFP module passes long-distance aging testing with reserved power margin, eliminating packet loss risks for enterprise WAN and cross-building projects.

Q5: Is short-distance testing under 1km risky for JD090A 100BASE-EX SFP module?
A: Short-distance testing within 1km carries high receiver overload risks. This JD090A SFP module features -8~-2dBm Tx power, -32dBm sensitivity and -8dBm overload threshold. Designed for 40km long-haul loss compensation, high output power easily causes receiver saturation and burnout in zero-loss short links. A 5-10dB optical attenuator is mandatory for short-range debugging to protect the SFP module.

Q6: Can HPE H3C JD090A SFP module work with multimode fiber?
A: No. The JD090A 100BASE-EX SFP module is dedicated for single-mode fiber only. Multimode fiber brings excessive signal attenuation and link failure, unable to support 40km long-distance transmission.

Q7: What connector fits HPE H3C JD090A 40km SFP module deployment?
A: This JD090A SFP module requires standard Duplex LC connectors for deployment. It ensures low optical reflectance and stable signal transmission for 40km long-distance single-mode fiber links.

Q8: What is the standard transmit power of HYTOPTODEVICE JD090A SFP module?
A: Our JD090A SFP module features factory-standard Tx power of -8~-2dBm. Optimized for 40km single-mode transmission, this power range balances long-haul loss compensation and short-link overload control for stable enterprise networking.

Q9: What is the receiver sensitivity of JD090A 100BASE-EX SFP transceiver module?
A: This JD090A SFP module delivers -32dBm high receiver sensitivity. The high-performance PIN receiver effectively captures weak optical signals in 40km long links, reducing bit errors and ensuring stable remote network operation.

Q10: How to calculate power budget for 40km JD090A SFP module fiber links?
A: This JD090A SFP module provides a 24dB power budget, calculated via max Tx (-8dBm) minus min Rx sensitivity (-32dBm). Standard single-mode fiber attenuates ~0.35dB/km at 1310nm. Total link loss must stay below 24dB, and a 3–5dB safety margin is recommended for formal SFP module project deployment.

Q11: Why does packet loss occur with normal optical power on JD090A SFP module links?
A: Normal optical power with packet loss is usually caused by port negotiation mismatch, dirty interfaces or poor fiber quality, not SFP module quality issues. Manually fix port speed/duplex mode and clean ports to resolve abnormal network errors.

Q12: What is the difference between 100BASE-EX and 100BASE-ZX SFP module?
A: Core differences lie in transmission distance and laser type. Our 100BASE-EX JD090A SFP module adopts FP/DFB laser at 1310nm for 40km urban and campus networking. 100BASE-ZX SFP module uses high-power DFB laser at 1550nm for 80km ultra-long cross-city WAN transmission.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • Factory wholesale compatible SFP module for HPE(H3C) long-distance single-mode fiber networking and bulk project procurement
  • HYTOPTODEVICE High-stability 100M 40km single-mode optical transceiver for H3C switch and router long-range fiber uplink
  • Tender-qualified 100BASE-EX transceiver with real-time DDM diagnosis for long-distance campus and WAN network deployment
  • hytoptodevice 100base-ex single-mode SFP module factory wholesale, stable inventory for network integrators and long-term distributors

Download