HYTOPTODEVICE is a professional Bidi module manufacturer & supplier. This H3C SFP-GE-120-SM1490-A compatible BiDi module meets IEEE 802.3ah 1000BASE-BX-U standards. It delivers 1.25Gbps bidirectional data transmission up to 120km on OS1/OS2 single-mode fiber via simplex LC connector at Tx1490nm/Rx1550nm. Preloaded H3C optimized EEPROM ensures seamless plug-and-play deployment without alarm prompts. We offer bulk factory wholesale Bidi module with custom EEPROM programming, OEM and private label services for global network resellers and system builders.
-
Complementary Pairing: BiDi transceivers must be deployed in matched pairs (e.g., TX1490/RX1550 with TX1550/RX1490). Mismatched wavelengths cannot establish a link.
-
Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF.
-
Connector Match: Simplex LC (UPC/PC polish only). Do NOT use Duplex LC or APC.
-
Laser Safety: Class 1 Laser. Never look directly into optical ports or fiber end-faces.
-
ESD Safety: Wear an anti-static wrist strap before handling the transceiver.
-
Cleanliness & Dust: Keep dust caps installed on all unused ports. Clean fiber connectors with an optical cleaning pen before insertion; dust causes over 80% of link failures.
-
Optical Attenuator Required: For short-distance testing or links (<30 km), connect a 10dB–15dB attenuator to the RX port to prevent receiver damage.
-
Installation & Hot-Swap: MSA compliant. Insert and remove gently without powering down the device.
-
High Loss / Packet Drops: Ensure fiber bend radius exceeds 30 mm, inspect optical power levels, and clean connectors.
-
No Link: Verify complementary BIDI wavelength pairing requirement; clean Simplex LC end-faces; check port speed configuration.
Primary Application Scenarios
● Single-fiber point-to-point inter-switch links for metro enterprise networks
● Cross-town gigabit interconnection with limited available fiber pairs
● Remote branch office long-haul backhaul over leased dark fiber lines
● Extra-long-distance uplink for distributed IP camera monitoring systems
● Metro network upgrade projects with constrained fiber infrastructure
Connectivity Solutions (Applications)
1.1GbE Switch-to-Switch Connectivity
2.1GbE Switch to Media Converter Connectivity
3.1G Structured Cabling
Core Product Features
1. BiDi SFP: Maximizing Fiber Efficiency
Replaces traditional dual-fiber setups with single-strand WDM multiplexing, fully unlocking unused fiber capacity and streamlining bulk network upgrades.

2.Double Your Capacity, Zero Extra Cabling
Transmit and receive on a single strand. By leveraging integrated WDM technology, this BiDi transceiver eliminates redundant wiring and slashes expansion costs for campus networks.

3. Efficient 1G Ethernet, Half the Fiber
Maximize data center efficiency. Delivers reliable Gigabit performance while lowering power consumption and halving fiber strand requirements.

4. Plug-and-Play Guaranteed Compatibility
Factory pre-programmed H3C-compatible EEPROM suppresses third-party module warning alerts. Hot swap works directly on supported switches without complex CLI configuration; custom EEPROM can be arranged for bulk orders.Specific Compatibility Video available upon request.

5. 100% Tested, Zero-Defect Guaranteed
Maximum network uptime, zero surprises. Every BIDI Transceiver undergoes rigorous physical testing in our Test Center before shipping to deliver rock-solid reliability out of the box.

Frequently Asked Questions
Q1: Can this 1.25G 120km simplex fiber BiDi module operate stably on H3C, Cisco or MikroTik gigabit switches?
A: Yes, this HYTOPTODEVICE Bidi module works on these switch platforms fitted with standard gigabit SFP slots. Pre-calibrated EEPROM ensures drop-in interoperability for compatible 1.25G SFP ports.
Q2: Is it possible to insert this BiDi module into a 10G SFP+ port of my network hardware?
A: Yes, most SFP+ ports provide backward compatibility for 1.25G SFP transceivers. You have to manually set port speed to 1G on the switch; auto-negotiation may fail without manual port configuration.
Q3: Do I need to upgrade my switch firmware to identify this BiDi optical transceiver?
A: No extra firmware upgrade is required for most supported switches. HYTOPTODEVICE custom EEPROM handles module identification; only verify your existing firmware supports standard MSA SFP hardware.
Q4: What solution can fix the "unsupported transceiver" alert after inserting this BiDi module?
A: This alert can be cleared through switch CLI adjustments or pre-customized EEPROM ordered from HYTOPTODEVICE. The warning is only vendor ID validation, and the optic still transmits stable 1.25G optical signals.
Q5: Can I pair this 120km BiDi module with a 40km or 80km BiDi optic at the opposite fiber end?
A: Yes, provided the TX/RX wavelengths match and you use an inline optical attenuator to prevent overloading the shorter-reach receiver. Mismatched power budget remains the main risk even with correct wavelength pairing.
Q6: What simple method can field installers use to tell TX1490 and TX1550 BiDi modules apart during site deployment?
A: You can quickly identify them from printed markings on the module housing. HYTOPTODEVICE clearly prints Tx/Rx wavelength specs on the module label to avoid reversed pairing during site deployment.
Q7: Will bench lab testing of this 120km BiDi module using short patch cords damage its internal optical receiver?
A: Yes, high transmit power will risk permanent damage to the APD receiver on short fiber links. Fit a 10~15dB inline optical attenuator to reduce incoming optical power during bench lab testing.
Q8: Are inline optical attenuators mandatory for field installation of this BiDi module on fiber links?
A: Attenuators are required for all fiber spans shorter than 30km. Use a 10–15dB inline attenuator for these short runs; links longer than 30km have sufficient natural fiber loss and no attenuator is needed for this HYTOPTODEVICE Bidi module.
Q9: Can this 120km BiDi module transmit data over multimode fiber (MMF) cable infrastructure?
A: No, this 120km BiDi module only supports OS1/OS2 single-mode fiber. MMF has high optical attenuation at 1490/1550nm and cannot sustain long-distance gigabit transmission.
Q10: What real-time optical metrics can be read via the built-in DDM monitoring feature of this BiDi module?
A: DDM continuously tracks critical optical performance metrics. You can read transmit power, receive power, module temperature and supply voltage through switch CLI or web UI on this HYTOPTODEVICE Bidi module.
Q11: Can DDM monitoring send advance warnings before the long-distance fiber connection fully drops offline?
A: Yes, DDM has pre-configured pre-failure alarm thresholds for optical power. It alerts network engineers before total link loss, helping avoid unexpected outages on metro long haul fiber links.
Q12: Can I install this BiDi module inside outdoor cabinets without temperature control?
A: This commercial grade HYTOPTODEVICE Bidi module supports operating temperature of 0°C ~ +70°C and cannot withstand extreme outdoor temperature. Choose HYTOPTODEVICE industrial version (-40°C ~ +85°C) if deployed inside unconditioned outdoor cabinets.
Q13: What is the maximum power consumption of this SFP BiDi optical module?
A: Max power consumption of this SFP module is ≤1W. Its low-power DFB laser plus APD receiver design keeps heat low for dense SFP slot deployment inside enterprise switch racks.
Q14: Why is the 120km BiDi module priced higher than 10km or 40km short-range BiDi optical modules?
A: Higher-grade optical components increase manufacturing cost. It adopts high-performance DFB laser, high-sensitivity APD receiver and precise wavelength filters required for reliable 120km single-fiber transmission.
Q15: What technical support services can HYTOPTODEVICE provide when long haul fiber links become unstable or fail to establish connection?
A: HYTOPTODEVICE provides professional pre-sales and after-sales technical support for bulk factory wholesale Bidi module orders. Our engineering team assists troubleshooting and offers field testing guidance for BiDi module deployments.
Packaging & Custom OEM Solutions
Individually sealed in ESD-safe packaging and ready to ship. We offer tailored OEM solutions—including custom logos and private labeling—to support high-volume distributors,wholesaler and system integrators.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- 100% hardware-tested compatibility with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 certified manufacturing facility in Shenzhen
- Full product range coverage:1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T
- In-stock supply & fast global shipping, average lead time of 3–5 business days with DHL/FedEx express options
- Dedicated pre-sales engineering support for custom configurations
- Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy.
- We can provide inspection and shipping videos to make you feel as if you are right here with the product.
- Private Label support - EEPROM / firmware customization support
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration
