• Wholesale H3C compatible 100BASE-FX multimode SFP transceiver for enterprise bulk procurement
  • Bulk purchase 100Mbps multimode fiber SFP module for H3C legacy network upgrade project
  • Project tender available 100BASE-FX SFP transceiver with real-time DDM optical diagnosis function
  • Factory direct supplier 2km 1310nm MMF SFP transceiver for H3C enterprise network deployment
  • Wholesale H3C compatible 100BASE-FX multimode SFP transceiver for enterprise bulk procurement
  • Bulk purchase 100Mbps multimode fiber SFP module for H3C legacy network upgrade project
  • Project tender available 100BASE-FX SFP transceiver with real-time DDM optical diagnosis function
  • Factory direct supplier 2km 1310nm MMF SFP transceiver for H3C enterprise network deployment

H3C SFP-FE-SX-MM1310-A  Compatible 100BASE-FX SFP Transceiver | 1310nm 2km MMF Bulk Factory Wholesale | HYTOPTODEVICE

HYTOPTODEVICE factory‑supplied H3C SFP‑FE‑SX‑MM1310‑A compatible 100BASE‑FX SFP transceiver.1310nm 2km multimode fiber module with DDM function. Support enterprise bulk order,system integrator tender procurement and legacy network upgrade wholesale. 
NO. Brand  Compatible P/N Remarks
1 Cisco  GLC-FE-100FX-RGD  IND
2 Cisco GLC-FE-100FX
3 Brocade  E1MG-100FX-OM 
4 Juniper  EX-SFP-1FE-FX 
5 H3C  SFP-FE-SX-MM1310-A 
6 HPE(H3C)  JD102A
7 HPE(Procurve)  J9054B
8 Palo Alto Networks  PAN-SFP-100BASE-FX
9 Extreme MGBIC-LC04
10 D-Link DEM-211 IND
Description
H3C SFP-FE-SX-MM1310-A Compatible 100BASE-FX SFP Transceiver | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE H3C SFP‑FE‑SX‑MM1310‑A compatible SFP transceiver is a plug‑and‑play replacement for original H3C modules. Adopting 1310nm FP laser, this 100BASE‑FX MMF SFP delivers stable 100Mbps transmission up to 2km over OM1/OM2 multimode fiber, fully matching official H3C optical and electrical specifications.
Pre‑flashed optimized EEPROM firmware ensures zero‑alarm operation on H3C switches without extra manual configuration. Factory‑calibrated and fully batch‑tested, these cost‑effective modules fit enterprise network upgrades, campus cabling, tender projects and large‑volume wholesale orders.

Key Technical Specifications

 H3C Compatible  SFP-FE-SX-MM1310-A Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 100Mbps
Wavelength 1310nm Max  Distance 2KM
Connector Duplex LC Transmitter Type FP 1310nm
Cable Type MMF Receiver Type PIN
TX Power -18~-10dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤1W Receiver Overload -8.0dBm
Protocols IEEE802.3ab, GR-468, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Port Matching

    Use standard 50/125µm or 62.5/125µm duplex multimode fiber (MMF) with LC-PC/UPC connectors. Single-mode fiber is not supported and will fail to reach 2km. Ensure the SFP port supports 100Mbps mode before insertion.

  • Installation & Hot-Swap Rules

    Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.

  • Link Loss Budget

    Offers a 6–11dB link budget for 2km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.

  • Operating Environment

    Commercial grade: 0°C to 70°C in indoor environments. For outdoor, high temperature, or harsh environments, select Industrial Grade (-40°C to 85°C). Keep away from extreme moisture and dust for long-term stability.

  • Real-Time Monitoring (DDM)

    Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.

  • Bulk Deployment

    Standardize fiber types and port settings across enterprise LAN or industrial networks for consistent performance.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Specially tuned firmware matches H3C authentication protocols for zero‑warning stable operation on H3C fast‑ethernet switching hardware. Suitable for bulk module replacement and engineering procurement without system alarms or port recognition failures.
  • H3C S5100 / S5500 Series Enterprise Switches
  • H3C S3100 / S3600 Series Access Switches
  • H3C MSR Series Multi‑service Routers
  • Universal 100M/1G dual‑rate SFP port H3C network hardware

2. Multi-Brand Cross Compatibility

This 100BASE-FX SFP transceiver complies with global MSA industry standards, supporting stable interconnection with mainstream brand network devices. Custom firmware is available for mixed-vendor multimode fiber network batch deployment.

3. Free Value-Added Services

We offer exclusive free value-added services for all  sfp optical transceivers  to reduce your project deployment and maintenance costs.
  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Cost-effective wholesale for large-scale deployment
  • Free custom EEPROM programming for special and legacy network environments

Primary Application Scenarios

  • Enterprise indoor 2km short-distance multimode fiber interconnection
  • Office building cross-room and floor 100Mbps fiber link construction
  • Legacy H3C Fast Ethernet multimode network SFP module replacement
  • Campus, factory and monitoring system short-range fiber transmission
  • Bulk upgrade and reconstruction of old multimode fiber network links

Connectivity Solutions(Applications)

1.100BASE to 100BASE for Switch-Switch
Pair H3C compatible 100BASE-FX SFP module with OM1/OM2/OM3/OM4 multimode fiber to build 100Mbps point-to-point fiber links up to 2km, ideal for indoor switch interconnection in offices and campuses.

Stable 100Mbps multimode fiber interconnection for campus and enterprise batch network deployment

2.100BASE to 100BASE for Switch-Media Converter

Use 1310nm 2km MMF multimode transceiver on switches with a 100BASE-FX media converter to realize optical-to-electrical conversion, enabling RJ45 legacy devices to join fiber network smoothly.
100BASE-FX Switch to Media Converter: Flexible optical-electrical conversion for engineering diversified network access

3.100BASE Structured Cabling

Deploy third-party compatible  SFP transceivers as standard fiber access ports for enterprise layered structured cabling, realizing unified, scalable 100Mbps multimode fiber network deployment.
HYTOPTODEVICE  100BASE-FX Structured Cabling: Standardized multimode wiring for enterprise unified network renovation and bulk procurement projects

The Core Feature

1. Low-Power Data Center Efficient Connectivity

With ultra-low power consumption below 1W, this 100BASE-FX SFP provides stable, cost-effective Fast Ethernet connectivity. It is an economical solution for data center, campus and enterprise low-speed access networking.

Low Latency 2km 1310nm MMF SFP Module for  Legacy Network Renovation


2.
Verified Host Interoperability for Devices

Pre-flashed EEPROM supports hot-swap plug-and-play. The module is fully recognized by mainstream devices without alarms or configuration adjustments, enabling seamless network replacement and upgrade.
Zero-Alarm Plug and Play 100BASE-FX SFP Transceiver for Fast Ethernet Devices

3.Rigorous Testing, Uncompromising Reliability

100% factory tested and aged SFP transceiver with uniform batch quality, ideal for large-scale replacement and bulk procurement of  H3C multimode fiber modules.

Factory Tested 100BASE-FX MMF SFP Module for Enterprise Bulk Procurement Projects


FAQ

Q1: Will this third‑party 100BASE‑FX SFP run normally on H3C and other brand network hardware?
A: Yes. HYTOPTODEVICE 100BASE‑FX SFP complies fully with MSA standards, plug‑and‑play on H3C, Cisco, Juniper, Aruba and multi‑brand switches. Great for mixed‑brand enterprise bulk‑network deployment and project reconstruction.

Q2: Is this 100Mbps FX optical module usable inside gigabit SFP interfaces or 10G SFP+ slots?
A: It works on dual‑rate 1G/100M SFP slots with automatic 100Mbps downgrade. Not compatible with dedicated 10G SFP+ ports. Perfect for legacy H3C network upgrade and mass‑replacement projects.

Q3: What causes unsupported‑transceiver alerts when deploying aftermarket SFP modules on H3C gear?
A: Unsupported‑transceiver alerts are caused by mismatched EEPROM firmware. HYTOPTODEVICE preloads H3C SFP‑FE‑SX‑MM1310‑A matched firmware for zero‑alarm, zero‑log operation for formal tender‑project delivery.

Q4: Can the 100BASE‑FX optical transceiver execute port auto‑negotiation functions?
A: 100BASE‑FX does NOT support auto‑negotiation. This HYTOPTODEVICE H3C‑compatible SFP runs fixed 100Mbps full‑duplex. Manually force port speed to 100Mbps full duplex to prevent multimode‑fiber‑project link flapping.

Q5: Which multimode‑fiber grades can pair with this H3C‑compatible 100BASE‑FX SFP transceiver?
A: Optimized for OM1 and OM2 multimode fiber for full‑range 2km stable transmission. Supports short‑distance deployment over OM3/OM4 fiber, fitting varied existing‑wiring enterprise bulk‑upgrade scenarios.

Q6: May I deploy a 100BASE‑FX SFP transceiver over single‑mode fiber infrastructure?
A: No. This is a dedicated multimode‑only 100BASE‑FX SFP module. Single‑mode fiber brings severe signal attenuation and link drop. HYTOPTODEVICE standardizes module‑selection guidance to avoid project‑configuration mistakes.

Q7: For 100BASE‑FX multimode‑fiber links, should I pick UPC or APC polished fiber connectors?
A: Always adopt UPC‑polished LC connectors. APC connectors create high reflectance and unstable multimode links. Standard UPC cabling guarantees reliability for all mass‑network‑project deployments.

Q8: Do short multimode‑fiber links below 100 meters require extra optical attenuators?
A: No attenuator needed for fiber runs shorter than 100 meters. HYTOPTODEVICE factory‑calibrated optical power reserves sufficient margin for short‑to‑medium‑range multimode‑fiber transmission.

Q9: What method can identify SFP transceiver laser aging or performance degradation?
A: Leverage built‑in DDM monitoring of this HYTOPTODEVICE SFP. Dropped optical‑power readings or abnormal temperature/voltage values signal laser degradation, supporting proactive enterprise‑network operation‑and‑maintenance.

Q10: From practical deployment perspective, how do 100BASE‑FX and 1000BASE‑SX multimode SFP modules differ?
A: 100BASE‑FX supplies 100Mbps/1310nm/2km stable legacy‑network connectivity. 1000BASE‑SX delivers gigabit‑rate high‑speed transmission. HYTOPTODEVICE supplies purpose‑built modules matching different‑bandwidth project‑procurement requirements.

Q11: Why is 1310nm wavelength selected for 100BASE‑FX instead of 850nm over multimode fiber?
A: 1310nm wavelength reduces modal dispersion and bit‑error rates across multimode fiber, securing stable 2‑kilometer transmission. It makes HYTOPTODEVICE 100BASE‑FX modules ideal for enterprise long‑distance structured‑wiring projects.

Q12: Does this batch‑supply H3C‑compatible SFP hardware integrate built‑in ESD static‑electricity protection?
A: Yes. All HYTOPTODEVICE H3C‑compatible SFP transceivers integrate professional ESD‑protection circuits to avoid static‑triggered damage during hot‑swap and on‑site engineering‑field deployment.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • Wholesale H3C compatible 100BASE-FX multimode SFP transceiver for enterprise bulk procurement
  • Bulk purchase 100Mbps multimode fiber SFP module for H3C legacy network upgrade project
  • Project tender available 100BASE-FX SFP transceiver with real-time DDM optical diagnosis function
  • Factory direct supplier 2km 1310nm MMF SFP transceiver for H3C enterprise network deployment

Download