Q1: Why can’t two identical H3C 15km Tx1550/Rx1310 BiDi modules establish a normal network link?
A: BiDi single-fiber transmission relies on wavelength division multiplexing for separate sending and receiving channels. Installing two identical Tx1550/Rx1310 100BASE-BX-D modules on both ends causes channel conflict and complete link failure. Our H3C SFP-FE-LX-SM1550-BIDI compatible modules must pair with Tx1310/Rx1550 BX-U modules. We provide matched module sets to eliminate on-site pairing errors for H3C project deployments.
Q2: Can H3C 100BASE-BX single-fiber modules communicate with traditional dual-fiber LX transceivers?
A: Interconnection is not supported. Single-fiber 100BASE-BX-D BiDi modules and dual-fiber 100BASE-LX modules adopt different optical transmission architectures and protocol logics, making cross-type signal identification impossible. Our dedicated H3C BiDi modules only work with matched single-fiber BX series modules for standard compliant networking.
Q3: Why do generic third-party modules trigger alarm prompts on H3C switches?
A: Official H3C network devices verify module EEPROM signature data by default. Most generic modules lack certified firmware matching the SFP-FE-LX-SM1550-BIDI specification, triggering unrecognized transceiver warnings. Our modules are pre-flashed with H3C-original verified firmware to achieve zero-alarm plug-and-play recognition for batch deployment.
Q4: Is manual port speed and duplex configuration required for H3C-compatible BiDi modules?
A: No manual tuning is needed. All our 15km 100BASE-BX-D BiDi modules support automatic speed and duplex negotiation, perfectly matching the 100Mbps full-duplex operating mode of H3C Fast Ethernet ports. The plug-and-play design greatly simplifies large-scale network deployment and daily maintenance work.
Q5: Can 15km-rated H3C BiDi modules work stably for short-distance wiring under 1km?
A: Yes, this module supports adaptive operation for both short and medium distances ranging from 500m to 15km. Built-in optical power anti-saturation protection avoids signal overload and receiver damage without needing external attenuators, adapting to diverse on-site wiring scenarios for enterprise engineering projects.
Q6: What power budget guarantees stable 15km transmission for H3C 100BASE-BX-D links?
A: Our H3C SFP-FE-LX-SM1550-BIDI compatible modules adopt a 15dB professional optical power budget, precisely calibrated for 15km single-mode fiber transmission. This sufficient margin offsets fiber attenuation, joint splicing loss and connector insertion loss, ensuring error-free stable 100Mbps data transmission for medium-range enterprise networking.
Q7: What type of interface does this H3C 15km BiDi transceiver adopt?
A: This module is equipped with a standard simplex LC interface. Different from dual-core LC modules that require two fiber strands, it completes bidirectional signal transmission via only one single-mode fiber core, saving half of fiber resources and reducing project cabling costs, ideal for fiber-insufficient network upgrades.
Q8: Which patch cord is suitable for H3C SFP-FE-LX-SM1550-BIDI module connection?
A: Standard blue UPC simplex LC patch cords are the only recommended option. This H3C-specific BiDi module is optimized for UPC flat end-face links. APC end-face jumpers will cause excessive insertion loss, leading to unstable signals and random packet loss during 15km transmission. We provide supporting accessory packages for one-stop procurement.
Q9: Does 100BASE-BX-D standard support full-duplex synchronous 100Mbps transmission?
A: Fully supported. By adopting WDM wavelength division technology, the module separates upstream and downstream signals on a single fiber core, enabling simultaneous sending and receiving of 100Mbps data without bandwidth loss or delay. It meets high-stability transmission demands for enterprise monitoring, office networking and ISP broadband access.
Q10: Do H3C 15km BiDi modules support hot-swap online replacement?
A: All our H3C compatible transceivers comply with MSA international hot-swap standards. Users can plug and replace modules online without shutting down switches or interrupting network services, effectively reducing enterprise maintenance downtime and ensuring 7×24-hour stable network operation.
Q11: Are the laser signals of 100BASE-BX-D BiDi modules safe for operation?
A: This H3C dedicated BiDi module adopts Class 1 safe laser chips that meet global safety certification standards. The low-power laser signal causes no harm to human eyes and body during installation, debugging and long-term operation, supporting safe long-term batch deployment in commercial and industrial network environments.
Q12: How to maintain idle BiDi SFP modules to extend service life?
A: When the module port is idle, please install the matched dust-proof cap in time to block dust, moisture and oil contamination. This daily maintenance avoids optical channel pollution and signal attenuation, effectively reducing failure rates and extending the service life of batch deployed H3C network equipment.