• EXTREME Compatible 100BASE-LX 1310nm 10km SFP Optical Transceiver
  • 100Mbps Fast Ethernet Duplex LC SMF SFP Module for Enterprise LAN
  • Bulk Wholesale 10km 100BASE-LX SFP Transceiver with DDM Monitoring
  • Zero Alarm Plug and Play Extreme Compatible 100M SFP Fiber transceiver Module
  • EXTREME Compatible 100BASE-LX 1310nm 10km SFP Optical Transceiver
  • 100Mbps Fast Ethernet Duplex LC SMF SFP Module for Enterprise LAN
  • Bulk Wholesale 10km 100BASE-LX SFP Transceiver with DDM Monitoring
  • Zero Alarm Plug and Play Extreme Compatible 100M SFP Fiber transceiver Module

H3C SFP-FE-LX-SM1310-D  Compatible 100M SFP Transceiver | 100BASE-LX 1310nm 10km Bulk & Wholesale | HYTOPTODEVICE

Shop high‑performance H3C SFP‑FE‑LX‑SM1310‑D compatible 100M SFP transceiver. 100BASE‑LX 1310nm 10km single‑mode SFP Transceiver with DDM support. Purchase bulk quantity, get factory direct wholesale price, fast lead‑time for enterprise network projects. 
NO. Brand  Compatible P/N Remarks
1 Cisco  GLC-FE-100LX-RGD IND
2 Cisco  GLC-FE-100LX 
3 Extreme MGBIC-LC05
4 H3C  SFP-FE-LX-SM1310-D 
5 HPE(H3C)  JF832A older
6 Brocade E1MG-100FX-10 
7 Juniper  EX-SFP-1FE-LX 
8 HPE(H3C)  JD120B
9 Dell GP-SFP2-1L-C
Description

H3C SFP-FE-LX-SM1310-D Compatible 100M SFP Transceiver | 100BASE‑LX 1310nm 10km Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE H3C SFP‑FE‑LX‑SM1310‑D compatible SFP Transceiver is cost‑effective drop‑in replacement for H3C enterprise switching hardware. It implements 100BASE‑LX Fast Ethernet standard, works at 1310nm wavelength over single‑mode fiber, delivering stable 10km transmission via duplex LC‑PC interface. Built‑in DDM DOM digital monitoring supports real‑time optical parameter reading.
Pre‑programmed EEPROM ensures smooth identification on H3C switch platforms without extra configuration. Ideal for customers who want to buy, procure or bulk‑order reliable SFP Transceiver for campus LAN, enterprise backbone and cross‑building fiber links. Strict batch testing guarantees consistent quality for large‑volume wholesale orders.

Key Technical Specifications

H3C Compatible  SFP‑FE‑LX‑SM1310‑D Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 100Mbps
Wavelength 1310nm Max  Distance 10KM
Connector Duplex LC Transmitter Type FP 1310nm
Cable Type SMF Receiver Type PIN
TX Power -14~-8dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤1W Receiver Overload -8.0dBm
Protocols IEEE802.3ab, GR-468, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Port Matching

    Use standard G.652.D duplex single-mode fiber (SMF) with LC-PC/UPC connectors. Multimode fiber is not supported and will fail to reach 10km. Ensure the SFP port supports 100Mbps mode before insertion.

  • Installation & Hot-Swap Rules

    Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.

  • Link Loss Budget

    Offers a 20dB link budget for 10km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.

  • Operating Environment

    Commercial grade: 0°C to 70°C in indoor environments. Keep away from extreme heat, moisture, and dust for long-term stability.

  • Real-Time Monitoring (DDM)

    Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.

  • Bulk Deployment

    Standardize fiber types and port settings across enterprise LAN or ISP deployments for consistent performance.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware

Pre‑tuned EEPROM enables hot‑swap plug‑and‑play for H3C Fast‑Ethernet SFP ports, matching original SFP‑FE‑LX‑SM1310‑D behavior.
  • H3C S5100 / S5500 / S6500 Series Enterprise Switches
  • H3C MSR Series Routers with SFP Fast‑Ethernet slots
  • H3C Dual‑rate 100M/1000BASE‑X switch ports

2. Multi-Brand Cross Compatibility

Designed per universal MSA standards, this 100M SFP Transceiver works stably with Huawei, Cisco, ZTE, Juniper and other mainstream devices. Custom firmware is available for multi-vendor network renovation and bulk deployment.
  • Enterprise fast‑ethernet routing & switching equipment
  • ISP access and commercial managed fiber switches

3. Free Value-Added Services

We offer exclusive free value-added services for all  sfp transceivers  to reduce your project deployment and maintenance costs.
  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Cost-effective wholesale for large-scale deployment
  • Free custom EEPROM programming for special and legacy network environments

Primary Application Scenarios

  • Ideal for Internet Service Provider (ISP) Fast Ethernet communication links
  • Widely applied in Enterprise LAN & SAN Networks optical transmission
  • Perfect for Data Center LAN & SAN Networks fiber link deployment
  • Suitable for campus inter-building and campus long-distance optical links
  • Reliable for security surveillance and legacy network module replacement

Connectivity Solutions(Applications)

Deploy paired H3C‑compatible SFP‑FE‑LX‑SM1310‑D SFP Transceiver over G.652.D single‑mode fiber to build stable 10km point‑to‑point Fast‑Ethernet links for enterprise campus networking.

100M FAST ETHERNET COMPATIBLE optical module

The Core Feature

1. Low-Power Data Center Efficient Connectivity

With ultra-low power consumption below 1W, this 100BASE SFP provides stable, cost-effective Fast Ethernet connectivity. It is an economical solution for data center, campus and enterprise low-speed access networking.

Low Power 100BASE-LX SFP Transceiver for Data Center and ISP Network


2.
Verified Host Interoperability for Devices

Pre-flashed EEPROM supports hot-swap plug-and-play. The module is fully recognized by mainstream H3C devices without alarms or configuration adjustments, enabling seamless network replacement and upgrade.
HYTOPTODEVICE Zero Alarm Plug and Play Cisco Compatible 100M SFP Fiber Module

3.Rigorous Testing, Uncompromising Reliability

Each SFP undergoes wavelength calibration, power testing, 72-hour aging and 10km link testing. Full quality inspection ensures stable batch performance and long-term reliable operation for engineering projects.

HYTOPTODEVICE MSA Compliant Replacement Optical Transceiver Full Tested


FAQ

Q1: Are H3C compatible 100BASE-LX SFP transceivers functional on gigabit dual-rate switch ports?
A: HYTOPTODEVICE H3C‑compatible 100BASE‑LX SFP Transceiver supports auto‑negotiation on Gigabit 1000BASE‑X SFP ports and locks at 100Mbps speed. It cannot run on 10G‑only SFP+ ports due to hardware rate limitation.

Q2: Do HYTOPTODEVICE SFP-FE-LX-SM1310-D modules meet official IEEE 802.3u industry standards?
A: Our SFP‑FE‑LX‑SM1310‑D replacement SFP Transceiver complies strictly with IEEE 802.3u and SFP MSA specifications. Each unit gets complete testing to guarantee protocol compatibility for enterprise network deployment.

Q3: Is it feasible to pair 100BASE-LX single-mode SFP with 100BASE-FX multimode optical modules?
A: Direct interconnection between a 100BASE‑LX (1310nm single‑mode) SFP and a 100BASE‑FX (1310nm multimode) SFP is not recommended and not standard‑compliant. Although both operate at a 1310nm wavelength, they rely on different fiber types and optical transceiver designs. Connecting them directly will lead to severe optical power mismatches, modal dispersion, and link failure. For stable transmission, always deploy matched HYTOPTODEVICE 100BASE‑LX SFP Transceiver on both ends using standard single‑mode fiber.

Q4: Why do third-party SFP transceivers trigger unsupported transceiver errors on H3C switches?
A: “Transceiver Unsupported” alarms usually come from EEPROM profile mismatch. HYTOPTODEVICE SFP‑FE‑LX‑SM1310‑D SFP Transceiver is pre‑programmed for H3C hardware. Contact us for free custom firmware if rare compatibility alarms appear.

Q5: Can I deploy this 100BASE-LX transceiver on multimode fiber for short-distance networking?
A: This SFP Transceiver is designed exclusively for G.652 single‑mode fiber. Multimode fiber brings excessive attenuation, reduces transmission distance and triggers packet loss, cannot achieve rated 10 km performance.

Q6: Does ultra-short single-mode fiber connection under 2km cause receiver burnout for 100BASE-LX SFP?
A: Short‑range links from 100 m to 2 km will not burn the receiver. This SFP Transceiver has built‑in optical‑power adaptive protection, safely adjusting receiving signal for short fiber links without hardware damage.

Q7: How much optical power budget does the 10km 100BASE-LX H3C compatible SFP transceiver provide?
A: HYTOPTODEVICE SFP‑FE‑LX‑SM1310‑D SFP Transceiver provides solid link budget: transmit power ‑15~‑8dBm, receiver sensitivity up to ‑32dBm. Plenty margin covers 10 km fiber plus connector and splicing loss for enterprise links.

Q8: Does SFP-FE-LX-SM1310-D replacement module support real-time DDM DOM monitoring?
A: This SFP Transceiver supports full SFF‑8472 DDM/DOM function. You can check real‑time optical power, temperature and voltage data from switch CLI for daily network maintenance.

Q9: What does -32dBm low Rx power reading mean on H3C switch port status?
A:‑32dBm is the native sensitivity threshold of this SFP Transceiver and not a hardware fault. Link instability below‑32dBm usually comes from dirty connectors, fiber bending or joint loss.

Q10: What
are the practical differences between 100BASE-LX and 100BASE-LX10 fiber modules?
A: 100BASE‑LX and 100BASE‑LX10 share identical core specs. LX10 is only a commercial renamed variant. Our SFP‑FE‑LX‑SM1310‑D SFP Transceiver supports both standards for replacement purpose.

Q11: What package formats are available for standard 100BASE-LX Fast Ethernet optical transceivers?
A: The 100BASE‑LX standard applies only to SFP package as our SFP‑FE‑LX‑SM1310‑D SFP Transceiver. It does not
work with SFP+ or fixed RJ45 copper ports. We supply other form‑factor optical modules upon request.

Q12: Is duplex 100BASE-LX SFP transceiver compatible with single-strand BiDi fiber networking?
A: Standard 100BASE‑LX SFP Transceiver uses duplex dual‑strand fiber and does not support BiDi single‑strand fiber. We offer matching BiDi SFP Transceiver for single‑fiber project requirements.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • EXTREME Compatible 100BASE-LX 1310nm 10km SFP Optical Transceiver
  • 100Mbps Fast Ethernet Duplex LC SMF SFP Module for Enterprise LAN
  • Bulk Wholesale 10km 100BASE-LX SFP Transceiver with DDM Monitoring
  • Zero Alarm Plug and Play Extreme Compatible 100M SFP Fiber transceiver Module

Download