| NO. | Brand | Compatible P/N | Remarks |
| 1 | Cisco | GLC-FE-100EX | |
| 2 | H3C | SFP-FE-LH40-SM1310 | |
| 3 | HPE（H3C） | JD090A | |
| 4 | Juniper | EX-SFP-1FE-LX40K | |
| 5 | Brocade | E1MG-100FX-LR-OM | |
| 6 | Dell | GP-SFP2-1E-C | |
| 7 | Extreme Networks | MGBIC-LX-40 | |
| 8 | Foundry Networks | E1MG-100FX-LR |
| Foundry Networks Compatible | E1MG-100FX-LR | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Max Data Rate | 100Mbps |
| Wavelength | 1310nm | Max Distance | 40KM |
| Connector | Duplex LC | Transmitter Type | FP 1310nm |
| Cable Type | SMF | Receiver Type | PIN |
| TX Power | -8~-2dBm | Receiver Sensitivity | < -32.0dBm |
| Power Consumption | ≤1W | Receiver Overload | -8.0dBm |
| Protocols | IEEE802.3ab, GR-468, MSA Compliant | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber & Port Matching
Use standard G.652.D duplex single-mode fiber (SMF) with LC-PC/UPC connectors. Multimode fiber is not supported and will fail to reach 40km. Ensure the SFP port supports 100Mbps mode before insertion.
Installation & Hot-Swap Rules
Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.
Link Loss Budget
Offers a 24dB link budget for 40km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.
Operating Environment
Commercial grade: 0°C to 70°C in indoor environments. Keep away from extreme heat, moisture, and dust for long-term stability.
Real-Time Monitoring (DDM)
Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.
Optical Attenuation (Crucial)
Never direct-connect! Since Tx reaches up to -2 dBm, install a 5–10 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -8 dBm and prevent receiver burnout.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.
