| NO. | Brand | Compatible P/N | Remarks |
| 1 | Cisco Linksys | MGBLH1 | |
| 2 | Allied Telesis | AT-SPLX40 | |
| 3 | D-link | DEM-314GT | |
| 4 | DELL | SFP-LX-40 | |
| 5 | Extreme | I-MGBIC-GLX-40 | |
| 6 | HPE H3C | JD061A | |
| 7 | Ruijie | MINI-GBIC-LH40-SM1310 | |
| 8 | Palo Alto Networks | PAN-SFP-EX | |
| 9 | MikroTik | S-31DLC40D | |
| 10 | Fortinet | FG-TRAN-EX |
| Fortinet Compatible | FG-TRAN-EX | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Max Data Rate | 1.25Gbps |
| Wavelength | 1310nm | Max Distance | 40km |
| Connector | Duplex LC | Transmitter Type | 1310nm DFB |
| Cable Type | SMF | Receiver Type | PIN |
| TX Power | -5.0~0dBm | Receiver Sensitivity | < -23.0dBm |
| Typical Power Consumption | ≤1W | Receiver Overload | -1dBm |
| Bit Error Ratio (BER) | 1E-12 | DDM/DOM | Support |
| Protocols | SFF-8472 MSA Compliant, IEEE 802.3ah-2004 | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Connector Match: UPC/PC polish only. Do NOT use APC
Cleanliness & Dust: Keep dust caps on all unused ports and connectors at all times. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Optical Attenuator Required for Short Links: For testing or short-distance connections (<10 km), connect a 5dB–10dB optical attenuator to the RX port to prevent damaging the receiver.
Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.
High Loss/Packet Drops: Check fiber bend radius (>30 mm); inspect optical power levels; clean optical connectors
No Link: Swap TX/RX fiber connections; clean fiber end-faces; verify port settings.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
Main Application Scenarios





HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






