| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Alcatel-Lucent | SFP-10G-SR | |
| 2 | Cisco Meraki | MA-SFP-10GB-SR | |
| 3 | D-Link | DEM-431XT | |
| 4 | Dell | GP-10GSFP-1S | |
| 5 | Juniper | SRX-SFP-10GE-SR | |
| 6 | H3C | SFP-XG-SX-MM850-A | |
| 7 | IBM | 46C3447 | |
| 8 | EdgeCore | ET5402-SR |
This 850nm 10GBASE‑SR multimode module runs at 10.3125Gbps, delivering 300m over OM3 fiber and 400m over OM4 fiber. DDM monitoring and hot‑swap capability guarantee stable 24/7 operation. Perfect for EdgeCore ToR uplink, leaf‑spine fabric and server cluster networking. Source bulk 10g sr sfp+ directly from factory to cut open‑switch project CAPEX.
Key Technical Specifications
|
EdgeCore Compatible |
ET5402-SR |
Vendor Name |
HYTOPTODEVICE |
| Form Factor | SFP+ | Max Data Rate | 10.7Gbps |
| Wavelength | 850nm | Max Distance | 300m on OM3 |
| Connector | Duplex LC | Transmitter Type | VCSEL 850nm |
| Cable Type | MMF | Receiver Type | PIN |
| TX Power | -6.5~-0.5dBm | Receiver Sensitivity | < -10.5dBm |
| Power Consumption | ≤1W | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber Choice: Duplex LC Multimode Fiber (MMF) — OM3 / OM4 (50/125 µm). Do NOT use SMF.
Connector Match: UPC/PC polish only. Do NOT use APC.
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Link Setup:Set speed to 10Gbps Full Duplex. Lock speed manually if auto-negotiation fails.
Handling: Wear ESD protection. Keep fiber bend radius ≥ 30 mm.
Installation & Hot-Swap Rules: MSA hot-swappable. Insert/remove gently without powering down.
Environment: Commercial temperature (0°C to 70°C). Avoid extreme heat, moisture, and dust.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
Main Application Scenarios









FAQ
Q1: Will this 10G SR SFP+ work out‑of‑box on EdgeCore white‑box open‑switches?
A: This 10g sr sfp+ ships with pre‑programmed ET5402‑SR EEPROM for native plug‑and‑play operation on EdgeCore hardware. For third‑party brand switches we offer free EEPROM re‑configuration. Fully MSA‑compliant mechanically and electrically; pre‑sales model validation is recommended for older firmware‑locked platforms. Submit your switch part‑number for free compatibility check before you bulk procure 10G SR transceivers.
Q2: What triggers “unsupported transceiver” logs on EdgeCore open‑network switches?
A: Main causes include mismatched EEPROM profiles, outdated firmware, or contaminated LC‑UPC fiber ports. Our 10g sr sfp+ solves most compatibility alarms via dedicated EdgeCore‑profile programming. Standard troubleshooting workflow: upgrade firmware, clean fiber end‑faces, reseat the module. Avoid generic unprogrammed optics when you purchase ET5402‑SR replacement transceivers.
Q3: Does this EdgeCore‑compatible SFP+ support DDM real‑time optical monitoring?
A: Yes, full DDM/DOM capability following SFF‑8472 industry standard. Read transmit power, receive power, laser bias current and module temperature via switch CLI or web UI. DDM data aids early‑stage link‑fault prediction, essential for daily O&M after bulk installation of 10g sr sfp+ modules.
Q4: Can APC green‑booted fiber jumpers pair with this 10G SR transceiver?
A: Not recommended for production deployment. This 10g sr sfp+ implements UPC‑type duplex LC interface. APC connectors introduce 8‑12dB extra return loss, raising bit‑error rate and triggering intermittent link drops. For EdgeCore open‑switch projects use OM3/OM4 UPC‑terminated multimode patch‑cords to guarantee link stability.
Q5: Does full‑port deployment on 48‑port EdgeCore ToR switches create overheating risks?
A: No thermal hazard. Each 10g sr sfp+ consumes ≤1.0W; full‑48‑port loading totals only 48W. Stable operation within 0‑70℃ commercial temperature range. Keep cabinet ambient temperature below 40℃ with unobstructed airflow. Low‑power design fits high‑density port bulk roll‑outs and large‑scale wholesale projects.
Q6: Compare power‑dissipation between 10G SR optical SFP+ versus 10GBASE‑T copper SFP+?
A: This 10g sr sfp+ optical module draws ≤1.0W per‑port; 10GBASE‑T copper modules consume 2.5‑4W per‑port. A fully‑loaded 48‑port switch can cut total heat‑load by 144W‑192W, easing cabinet cooling pressure and lowering PUE. Optical 10G SR modules deliver clear energy‑saving benefits for bulk EdgeCore open‑data‑center network upgrades.
Q7: Does this ET5402‑SR compatible transceiver integrate on‑board hardware FEC?
A: This 10g sr sfp+ follows native IEEE 10GBASE‑SR specification without built‑in FEC silicon. Bit error rate stays ≤1×10⁻¹² over qualified OM3/OM4 links. You may enable ASIC‑level FEC on the EdgeCore switch side for high‑risk links. Clarify link‑quality requirements in advance when you procure 10G SR optics for core‑fabric deployment.
Q8: Is hot‑swap supported for live‑production module replacement?
A: Yes, fully MSA hot‑swap compliant for non‑power‑off insertion‑removal on EdgeCore open‑switches. Only 1‑3 seconds brief link‑fluctuation occurs during swap. Perform replacement within maintenance‑window to prevent business impact. Convenient for daily O&M after bulk purchasing spare 10g sr sfp+ modules.
Q9: Are third‑party 10G SR SFP+ reliable for EdgeCore leaf‑spine open‑fabric core networks?
A: Qualified factory‑validated third‑party 10g sr sfp+ meets mission‑critical open‑fabric deployment demands. Our modules complete 72‑hour full‑rate burn‑in with MTBF ≥1,000,000 hours. Inferior generic optics suffer unstable laser‑power failures. Reserve 10‑15% spare units when buying in bulk for EdgeCore‑based core‑network construction to maintain redundancy.
Q10: Which certifications should you verify before bulk transceiver procurement?
A: Before bulk‑sourcing 10g sr sfp+, confirm IEEE 802.3ae compliance, SFP+ MSA specification, RoHS environmental certification and Class‑1 laser‑safety approval. We supply full certification documents for EdgeCore open‑switch‑project audit purposes. Avoid uncertified low‑grade optics to mitigate network‑operation risks.
Q11: What is the factory warranty for this ET5402‑SR replacement transceiver?
A: HYTOPTODEVICE provides 3‑year factory warranty for this 10g sr sfp+, exceeding typical 1‑year OEM warranty of original ET5402‑SR. Direct defective‑unit replacement without repair work. Confirm warranty clauses and after‑sales terms while signing bulk‑order contracts for EdgeCore open‑network‑upgrade projects.
Q12: Can mis‑aligned insertion damage EdgeCore switch SFP+ physical ports?
A: Forced mis‑aligned insertion ranks among top causes of SFP+ port hardware damage. When seating this 10g sr sfp+, push smoothly until you hear a clear click for full mechanical contact. Provide unified installation training for deployment‑staff before large‑scale roll‑out to reduce hardware‑damage risk during bulk‑project implementation.
Q13: Why is there large price gap between original EdgeCore ET5402‑SR and third‑party 10G SR SFP+?
A: Original ET5402‑SR pricing includes OEM patent overhead, channel markup and official‑support premium. Our factory‑direct‑sale 10g sr sfp+ eliminates middle‑man markup while respecting MSA & IEEE specs, saving 55%‑70% procurement expense. Cost advantage is prominent for large‑volume wholesale and centralized open‑switch‑project purchasing.
Q14: How does long‑term TCO compare between fiber‑based 10G SR SFP+ and 10GBASE‑T copper SFP+?
A: Fiber‑based 10g sr sfp+ delivers superior long‑term TCO: low power draw cuts cooling‑expense, supports 300‑400m reach and offers strong electromagnetic‑interference immunity. 10GBASE‑T copper modules limit reach to 30m with higher power consumption. Optical transceivers represent the most cost‑effective option for long‑term O&M during EdgeCore open‑data‑center renovation projects.
Q15: Can these 10G SR SFP+ modules be used for stack‑link aggregation between EdgeCore switches?
A: Yes, this 10g sr sfp+ supports EdgeCore‑switch stacking links when paired with OM3/OM4 multimode fiber. Complete lab‑based stability verification before production go‑live to guarantee stack‑protocol synchronization and data‑transmission stability. Widely‑adopted for batch‑stack‑transformation of EdgeCore enterprise‑switch groups.
Q16: What testing tools and receive‑power reference apply to validate 10G SR link health?
A: Required test instruments: switch‑built‑in DDM monitoring, optical‑power‑meter and fiber‑endoscope. Valid RX receive‑power range for this 10g sr sfp+ link is ‑0.5dBm ~ ‑10.5dBm. Judge real‑time link‑quality through DDM readings. Perform formal link‑validation testing upon bulk‑order receipt to secure project‑delivery quality.
Packaging & Custom OEM Solutions
Every 10G SFP+ SR module comes individually sealed in standard anti-static (ESD-safe) packaging, pre-stocked and ready for immediate shipment. For bulk orders, we offer custom OEM packaging—including logo printing and private labeling—tailored for network distributors, system integrators, and enterprise deployments.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.



