• 1000BASE‑BX‑U 80km SFP BIDI TRANSCEIVER FROM HYTOPTODEVICE
  • 80km single‑strand BiDi SFP  FROM HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 80km SMF 1.25G
  • 1490/1550nm simplex LC gigabit module 80KM BIDI
  • 1000BASE‑BX‑U 80km SFP BIDI TRANSCEIVER FROM HYTOPTODEVICE
  • 80km single‑strand BiDi SFP  FROM HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 80km SMF 1.25G
  • 1490/1550nm simplex LC gigabit module 80KM BIDI

Extreme MGBIC-BX80-U Compatible BiDi SFP Transceiver 80km | 1000BASE-BX-U Tx1490Rx1550 Simplex LC Bulk & Wholesale | HYTOPTODEVICE

HYTOPTODEVICE Extreme MGBIC‑BX80‑U compatible BiDi SFP optic, 1000BASE‑BX‑U Tx1490nm‑Rx1550nm single‑strand SMF reaches 80km with simplex‑LC. Pre‑programmed Extreme XOS‑optimized EEPROM, ideal for network integrator project roll‑out, value‑added reseller stock replenishment and cost‑effective Extreme hardware replacement sourcing.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco GLC-BX80-UA
2 Cisco Cisco GLC-BX80-UA-I 
3 Brocade  E1MG-1G-BXU-80
4 Dell  SFP-GE-BX80-1490
5 Extreme MGBIC-BX80-U
6 H3C  SFP-GE-LH70-SM1490-BIDI
7 HPE H3C   SFP-1G-BXU-80 
8 Huawei  SFP-GE-ZBXD1
9 Juniper  SFP-GE80KT14R15
10 MikroTik  S-4554LC80D-1490
11 Netgear  SFP-GE-BX80 
Description

Extreme MGBIC‑BX80‑U Compatible BiDi SFP Transceiver 80km | 1000BASE‑BX‑U Tx1490Rx1550 Simplex LC Bulk & Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE Extreme MGBIC‑BX80‑U compatible BiDi SFP adheres to IEEE 802.3z gigabit Ethernet specification. Leveraging proven WDM wavelength multiplexing technology, this BiDi SFP delivers bidirectional 1.25Gbps throughput over just one single‑mode fiber strand, supporting up to 80km transmission using Tx1490nm / Rx1550nm wavelength combination. Well‑suited for campus cross‑building interconnections, remote site backhaul, dark‑fiber service provision and surveillance aggregation uplink projects where usable fiber pairs are scarce. Pre‑loaded Extreme‑tuned EEPROM profile ensures smooth hardware recognition and suppresses third‑party module warning logs under ExtremeXOS operating system. We support pre‑purchase sample validation, volume BiDi SFP wholesale ordering, custom private‑label marking and firmware adjustment services for solution providers, value‑added resellers and enterprise project purchasers.

Key Technical Specifications

Extreme Compatible  MGBIC-BX80-U Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength TX1490nm/RX1550nm Max Distance 80km 
Connector Simplex LC Transmitter Type 1490nm DFB
Cable Type SMF Receiver Type PIN
TX Power 0~5dBm Receiver Sensitivity < -26.0dBm
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Operational Best Practices

  • Complementary Pairing: BiDi transceivers must be deployed in matched pairs (e.g., TX1490/RX1550 with TX1550/RX1490). Mismatched wavelengths cannot establish a link.

  • Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF.

  • Connector Match: Simplex LC (UPC/PC polish only). Do NOT use Duplex LC or APC.

  • Laser Safety: Class 1 Laser. Never look directly into optical ports or fiber end-faces.

  • ESD Safety: Wear an anti-static wrist strap before handling the transceiver.

  • Cleanliness & Dust: Keep dust caps installed on all unused ports. Clean fiber connectors with an optical cleaning pen before insertion; dust causes over 80% of link failures.

  • Optical Attenuator Required: For short-distance testing or links (<20 km), connect a 10dB–15dB attenuator to the RX port to prevent receiver damage.

  • Installation & Hot-Swap: MSA compliant. Insert and remove gently without powering down the device.

  • High Loss / Packet Drops: Ensure fiber bend radius exceeds 30 mm, inspect optical power levels, and clean connectors.

  • No Link: Verify complementary BIDI wavelength pairing requirement; clean Simplex LC end-faces; check port speed configuration.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices


1. Supported Hardware & Firmware

This Extreme MGBIC‑BX80‑U compatible transceiver comes flashed with Extreme‑optimized firmware to suppress unknown‑transceiver alert logs. It delivers stable performance on mainstream ExtremeXOS firmware for enterprise‑class switching hardware.
● Extreme Summit Series Switches
 ○ X440‑G2 Series
 ○ X450‑G2 Series
 ○ X460‑G2 Series
● ExtremeSwitching X‑Series Platforms
 ○ X465 Series
 ○ X590 Series
● General Extreme Network Hardware
 ○ All Extreme devices equipped with standard gigabit SFP MGBIC slots

2. Multi-Brand Cross Compatibility

This transceiver complies with MSA standards, interoperable with Huawei, H3C, Juniper, Arista, Brocade, Dell network hardware. Custom EEPROM programming available for multi‑vendor mixed industrial‑site networking.

3. Free Value-Added Services

We provide professional customization for bulk Bidi sfp transceiver module orders, including firmware adaptation and custom labeling, meeting personalized procurement demands for compatible optical modules.

Primary Application Scenarios

● Single‑fiber point‑to‑point inter‑switch links for large enterprise campus environment
● Cross‑building gigabit interconnection when available physical fiber pairs are limited
● Multi‑site campus backhaul built upon third‑party leased dark‑fiber assets
● Aggregation‑layer uplink for geographically distributed IP surveillance camera clusters
● Legacy network modernization projects constrained by existing fiber‑cable infrastructure


Connectivity Solutions (Applications)

1.1GbE Switch-to-Switch Connectivity
HYTOPTODEVICE BiDi SFP transceiver for single‑fiber point‑to‑point enterprise deployment
2.1GbE Switch to Media Converter Connectivity
HYTOPTODEVICE 80km BiDi SFP for campus long‑haul gigabit inter‑building links
3.1G Structured Cabling
HYTOPTODEVICE single strand SFP for ISP FTTH and remote branch backhaul


Core Product Features

1. Single-Fiber WDM Optimization

Cut cabling costs in half. Enables full bidirectional traffic over a single fiber strand using WDM technology—maximizing existing network infrastructure without extra wiring.
hytoptodevice bidi sfp transceiver 1.25g LC connector SMF 80km

2.Double Bandwidth, Zero New Fiber

Instant network expansion. Transmit bi-directionally on a single strand to instantly double link capacity—delivering cost-effective, high-efficiency bandwidth for Cisco enterprise and FTTx upgrades.

80km LC TX1490/RX1550 BiDi SFP Module double network bandwidth bulk wholesale chart for network upgrade

3. Low-Power 1G Single-Fiber Connectivity

Cut energy and cabling costs simultaneously. Enables high-efficiency Gigabit Ethernet links over a single fiber strand with optimized, low-power operation.
gigabit single fiber bidirectional sfp module with low power

4. Plug-and-Play Guaranteed Compatibility

Factory‑programmed Extreme‑oriented EEPROM eliminates third‑party module warning events. Hot‑swap insertion operates out‑of‑box for supported Summit and X‑Series switches without complicated command‑line tuning.Specific Compatibility Video available upon request.

HYTOPTODEVICE compatible SFP bidi transceiver 80km SMF

5. 100% Tested, Zero-Defect Guaranteed
Maximum network uptime, zero surprises. Every module undergoes rigorous physical testing in our Test Center before shipping to deliver rock-solid reliability out of the box.

HYTOPTODEVICE BiDi SFP transceiver full aging test for stable 80km single‑fiber operation


Frequently Asked Questions 

Q1: Besides Extreme Summit and X‑Series hardware, can this Extreme‑profile BiDi SFP run normally under other vendors’ network infrastructure? A1: It can operate across multi‑brand platforms after dedicated firmware adjustment. Factory‑loaded Extreme‑optimized EEPROM enables hassle‑free deployment for ExtremeXOS‑based Summit and X‑Series gear; custom EEPROM rewriting is necessary for Cisco, H3C, Juniper or Arista switches. Conduct sample validation ahead of large‑volume wholesale procurement to prevent transceiver‑recognition faults.

Q2: Am I permitted to insert this 1.25G BiDi SFP module into a hardware port originally engineered for 10G SFP+ transceivers? A2: A number of 10G‑rate SFP+ ports deliver backward compatibility for gigabit SFP optics, yet manual port‑speed locking to 1G is required within your switch configuration. Physical insertion fit does not guarantee auto‑negotiation success; manual configuration adjustment is essential for steady gigabit link status.

Q3: Is it feasible to combine this Tx1490/Rx1550 BiDi optic with conventional dual‑fiber gigabit SFP hardware to build working network links? A3: Such mixing cannot yield usable network connectivity. This BiDi SFP applies WDM multiplexing over one fiber strand, while ordinary dual‑fiber SFP sends signals across two separate physical fiber cores. Always match it with reverse‑wavelength complementary BiDi partner modules rather than mixing dual‑fiber optics.

Q4: What kind of network malfunction will occur if I fit BiDi SFP units with identical wavelength setting on both sides of fiber span? A4: You will encounter total link outage alongside LOS alarms reported by connected network switches. Both sides transmit light at 1490 nm and receive at 1550 nm without wavelength cross‑matching. One side must deploy Tx1490/Rx1550 and the remote‑end must adopt Tx1550/Rx1490 to complete bidirectional WDM transmission path.

Q5: During field commissioning work, how do on‑site technicians rapidly tell apart Tx1490 and Tx1550 BiDi SFP units? A5: Refer to printed marking content on SFP metal housing shell. Every BiDi SFP carries explicit Tx‑Rx wavelength marking information. Never judge merely based on plastic latch color; double‑check printed label information before cabling work to avoid wavelength‑mismatch accidents.

Q6: Which fiber‑cable variant should field engineers prepare when deploying this Extreme‑compatible long‑reach BiDi SFP? A6: Simplex‑LC terminated OS1 / OS2 single‑mode patch cords are mandatory. Duplex‑LC and multimode fiber cables prove incompatible for 80 km single‑strand BiDi transmission scenarios. Thoroughly clean simplex‑LC connector faces before connection to cut insertion‑loss values and reduce random LOS failure risks for long‑distance enterprise links.

Q7: What optical chip composition is integrated inside this 80‑km‑reach Extreme‑compatible BiDi SFP transceiver? A7: This BiDi SFP integrates DFB laser transmitter matched with PIN receiver hardware. PIN receiver delivers receiving sensitivity reaching down to ‑26 dBm. This mature chip combination delivers consistent optical signal performance across full‑spec 80km single‑mode fiber enterprise deployments.

Q8: What practical link‑budget performance can network planners expect with this 80 km BiDi SFP within real‑world enterprise fiber environments? A8: Our module provides TX output power 0‑5 dBm alongside RX sensitivity better than ‑26 dBm, delivering minimum 26 dB overall link budget. Standard single‑mode fiber presents roughly 0.25 dB/km attenuation within the 1490‑1550 nm spectral band. Reserve extra loss allowance for field splices and connector joints; keep cumulative total loss under 26 dB for reliable full‑distance operation.

Q9: Will this long‑haul 80 km BiDi SFP draw substantially more power compared to short‑range 10‑20 km BiDi SFP alternatives? A9: No, power consumption remains tightly controlled below 1 W. This product uses proven DFB laser plus PIN‑receiver chip architecture. It fully satisfies SFP MSA power‑draw specifications and poses no overload risk for standard SFP MGBIC host switch ports.

Q10: For enterprise network‑refresh initiatives, what practical value can single‑fiber BiDi SFP deliver compared against traditional dual‑fiber gigabit SFP hardware? A10: BiDi SFP halves consumed fiber‑core count for locations suffering fiber‑pair constraints. WDM technology enables bidirectional gigabit traffic over one fiber strand. It fits cross‑campus links, multi‑site backhaul and network‑renovation jobs where laying additional fiber pairs generates high capital outlay.

Q11: Can this BiDi SFP hardware be deployed inside existing CWDM or DWDM wavelength‑multiplexing network setup? A11: Deployment inside standard CWDM / DWDM systems is strongly discouraged. Its fixed 1490 nm /1550 nm working wavelengths overlap commonly‑used CWDM channel spectrum ranges. Select purpose‑built CWDM‑rated optical transceivers if wavelength‑multiplexed networking forms part of your enterprise project scope.

Q12: What factory‑backed warranty coverage applies for bulk & wholesale orders of this Extreme‑compatible BiDi SFP optic? A12: HYTOPTODEVICE supplies standard 5‑year factory warranty covering manufacturing‑originated hardware defects. Warranty validity applies for hardware failures occurring within rated 0‑70℃ commercial operating environment; damage induced by ESD surges, dirty fiber end‑faces, optical receiver overload or improper field‑handling procedures sits outside warranty coverage scope.

Q13: Why does 80km‑class BiDi SFP carry higher unit pricing versus shorter‑distance 10km or 20km BiDi SFP products? A13: High‑power DFB/EML lasers, high‑sensitivity PIN receivers, and tight wavelength‑isolation filters drive up manufacturing costs. Short‑reach BiDi transceivers can implement lower‑cost optical‑component selections. Additional precise optical calibration and burn‑in aging procedures targeted for long‑haul operation further push up total production expenses.

Q14: What troubleshooting workflow should network technicians follow when facing Rx Power Low or LOS alarms triggered by this BiDi SFP on Extreme XOS switches? A14: Start fault‑isolation work from physical‑layer field connections. Clean simplex‑LC patch‑cable connector surfaces, re‑seat BiDi SFP transceivers firmly inside SFP MGBIC slots, double‑check wavelength pairing correctness, and measure end‑to‑end total optical link loss. If measured loss exceeds module‑specified link budget, shorten transmission span or deploy appropriate fiber amplifier hardware for extra‑long single‑fiber links.

Q15: Which common root factors produce unstable intermittent link‑flapping on enterprise single‑fiber BiDi SFP connections running under ExtremeXOS? A15: Link‑flapping mostly originates from physical‑layer faults related to the PIN receiver unit. Typical triggers include contaminated fiber‑connector faces, insufficient received optical margin, reversed wavelength pairing, ESD‑damaged PIN receiver hardware or excessive cabinet operating temperature. Fetch DDM real‑time optical‑power and temperature readings to accelerate fault‑source identification work.

Packaging & Custom OEM Solutions

Individually sealed in ESD-safe packaging and ready to ship. We offer tailored OEM solutions—including custom logos and private labeling—to support high-volume distributors,wholesaler and system integrators.
HYTOPTODEVICE sfp-10g-sr optical transceiver module custom package

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% hardware-tested compatibility with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Full product range coverage:1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T
  • In-stock supply & fast global shipping, average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.
  • Private Label support - EEPROM / firmware customization support

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • 1000BASE‑BX‑U 80km SFP BIDI TRANSCEIVER FROM HYTOPTODEVICE
  • 80km single‑strand BiDi SFP  FROM HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 80km SMF 1.25G
  • 1490/1550nm simplex LC gigabit module 80KM BIDI

Download