• 1000BASE‑BX‑U SFP BIDI TRANSCEIVER FROM HYTOPTODEVICE
  • 80km single‑strand BiDi SFP  FROM HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 80km SMF 1.25G
  • 1490/1550nm simplex LC gigabit module 80KM BIDI
  • 1000BASE‑BX‑U SFP BIDI TRANSCEIVER FROM HYTOPTODEVICE
  • 80km single‑strand BiDi SFP  FROM HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 80km SMF 1.25G
  • 1490/1550nm simplex LC gigabit module 80KM BIDI

Dell SFP-GE-BX80-1490 Compatible BiDi SFP Transceiver 80km | 1000BASE-BX-U Tx1490Rx1550 Simplex LC Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE Dell SFP‑GE‑BX80‑1490 compatible BiDi SFP, 1000BASE‑BX‑U single‑strand simplex‑LC optic, Tx1490/Rx1550 reaches 80km over OS1/OS2 SMF. Dell‑validated EEPROM profile, ideal for system integrator project roll‑out, reseller stock replenishment and cost‑saving Dell network hardware replacement.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco GLC-BX80-UA
2 Cisco Cisco GLC-BX80-UA-I 
3 Brocade  E1MG-1G-BXU-80
4 Dell  SFP-GE-BX80-1490
5 Extreme MGBIC-BX80-U
6 H3C  SFP-GE-LH70-SM1490-BIDI
7 HPE H3C   SFP-1G-BXU-80 
8 Huawei  SFP-GE-ZBXD1
9 Juniper  SFP-GE80KT14R15
10 MikroTik  S-4554LC80D-1490
11 Netgear  SFP-GE-BX80 
Description

Dell SFP‑GE‑BX80‑1490 Compatible BiDi SFP Transceiver 80km | 1000BASE‑BX‑U Tx1490Rx1550 Simplex LC Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE Dell SFP‑GE‑BX80‑1490 compatible BiDi SFP follows IEEE 802.3z gigabit Ethernet specification. This BiDi SFP leverages WDM wavelength multiplexing to transmit and receive gigabit traffic via only one single‑mode fiber core, delivering 1.25Gbps throughput up to 80km with Tx1490nm / Rx1550nm wavelength scheme. It fits real‑world pain points such as insufficient existing fiber resources for campus cross‑building links, multi‑branch interconnection, dark‑fiber service delivery and surveillance aggregation uplink projects. Pre‑loaded Dell‑specific EEPROM profile ensures seamless identification without third‑party module warning logs on Dell switching hardware. We support pre‑purchase sample testing, volume BiDi SFP ordering, custom private‑label and firmware adjustment services for solution providers, value‑added resellers and enterprise project purchasers.

Key Technical Specifications

Dell Compatible  SFP‑GE‑BX80‑1490 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength TX1490nm/RX1550nm Max Distance 80km 
Connector Simplex LC Transmitter Type 1490nm DFB
Cable Type SMF Receiver Type PIN
TX Power 0~5dBm Receiver Sensitivity < -26.0dBm
Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Operational Best Practices

  • Complementary Pairing: BiDi transceivers must be deployed in matched pairs (e.g., TX1490/RX1550 with TX1550/RX1490). Mismatched wavelengths cannot establish a link.

  • Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF.

  • Connector Match: Simplex LC (UPC/PC polish only). Do NOT use Duplex LC or APC.

  • Laser Safety: Class 1 Laser. Never look directly into optical ports or fiber end-faces.

  • ESD Safety: Wear an anti-static wrist strap before handling the transceiver.

  • Cleanliness & Dust: Keep dust caps installed on all unused ports. Clean fiber connectors with an optical cleaning pen before insertion; dust causes over 80% of link failures.

  • Optical Attenuator Required: For short-distance testing or links (<20 km), connect a 10dB–15dB attenuator to the RX port to prevent receiver damage.

  • Installation & Hot-Swap: MSA compliant. Insert and remove gently without powering down the device.

  • High Loss / Packet Drops: Ensure fiber bend radius exceeds 30 mm, inspect optical power levels, and clean connectors.

  • No Link: Verify complementary BIDI wavelength pairing requirement; clean Simplex LC end-faces; check port speed configuration.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices


1. Supported Hardware & Firmware

This Dell SFP‑GE‑BX80‑1490 compatible transceiver is flashed with Dell‑optimized firmware to suppress unknown‑transceiver alert logs. It runs reliably under mainstream Dell OS firmware for enterprise‑class switching devices.
● Dell PowerSwitch Modern Enterprise Switches
 ○ N‑Series: N2024, N2048, N3024F, N3048P, N4032F
 ○ S‑Series: S3124, S3148, S4048‑ON
● Dell Legacy PowerConnect Switches
 ○ PowerConnect 5524, 5548, 6224, 6248
● General Dell Network Hardware
 ○ All Dell network devices equipped with standard gigabit SFP slots

2. Multi-Brand Cross Compatibility

This transceiver complies with MSA standards, interoperable with Huawei, H3C, Juniper, Arista, Brocade, Dell network hardware. Custom EEPROM programming available for multi‑vendor mixed industrial‑site networking.

3. Free Value-Added Services

We provide professional customization for bulk Bidi sfp transceiver module orders, including firmware adaptation and custom labeling, meeting personalized procurement demands for compatible optical modules.

Primary Application Scenarios

● Single‑fiber point‑to‑point inter‑switch links for enterprise campus environment
● Cross‑building gigabit interconnection when available fiber pairs are limited
● Multi‑branch office backhaul based on third‑party leased dark‑fiber resources
● Aggregation‑layer uplink for large‑scale distributed IP surveillance systems
● Existing network upgrade projects with constrained fiber‑cable infrastructure


Connectivity Solutions (Applications)

1.1GbE Switch-to-Switch Connectivity
HYTOPTODEVICE BiDi SFP transceiver for single‑fiber point‑to‑point enterprise deployment
2.1GbE Switch to Media Converter Connectivity
HYTOPTODEVICE 80km BiDi SFP for campus long‑haul gigabit inter‑building links
3.1G Structured Cabling
HYTOPTODEVICE single strand SFP for ISP FTTH and remote branch backhaul


Core Product Features

1. Single-Fiber WDM Optimization

Cut cabling costs in half. Enables full bidirectional traffic over a single fiber strand using WDM technology—maximizing existing network infrastructure without extra wiring.
hytoptodevice bidi sfp transceiver 1.25g LC connector SMF 80km

2.Double Bandwidth, Zero New Fiber

Instant network expansion. Transmit bi-directionally on a single strand to instantly double link capacity—delivering cost-effective, high-efficiency bandwidth for Cisco enterprise and FTTx upgrades.

80km LC TX1490/RX1550 BiDi SFP Module double network bandwidth bulk wholesale chart for network upgrade

3. Low-Power 1G Single-Fiber Connectivity

Cut energy and cabling costs simultaneously. Enables high-efficiency Gigabit Ethernet links over a single fiber strand with optimized, low-power operation.
gigabit single fiber bidirectional sfp module with low power

4. Plug-and-Play Guaranteed Compatibility

Factory‑programmed Dell‑oriented EEPROM eliminates third‑party module warning messages. Hot‑swap insertion works out‑of‑box for supported Dell switches without complicated command‑line tuning.Specific Compatibility Video available upon request.

HYTOPTODEVICE compatible SFP bidi transceiver 80km SMF

5. 100% Tested, Zero-Defect Guaranteed
Maximum network uptime, zero surprises. Every module undergoes rigorous physical testing in our Test Center before shipping to deliver rock-solid reliability out of the box.

HYTOPTODEVICE BiDi SFP transceiver full aging test for stable 80km single‑fiber operation


Frequently Asked Questions 

Q1: Besides Dell enterprise switches, can this Dell‑profile BiDi SFP function normally under other vendors’ network hardware? A1: It can work across multi‑brand platforms after firmware adjustment. Factory‑loaded Dell EEPROM enables hassle‑free deployment for Dell PowerSwitch and PowerConnect series; custom EEPROM rewriting is necessary for Cisco, H3C, Juniper or Arista gear. Complete sample verification before mass purchase helps you avoid transceiver‑recognition failures.

Q2: Is it feasible to install this 1.25G BiDi SFP into a hardware port originally designed for 10G SFP+ modules? A2: A number of 10G SFP+ ports offer backward compatibility for gigabit SFP optics, yet you need to manually lock port speed to 1G via switch configuration. Physical insertion does not guarantee auto‑negotiation success; manual configuration is essential for steady gigabit link status.

Q3: Can I combine this Tx1490/Rx1550 BiDi optic with conventional dual‑fiber gigabit SFP to build up network links? A3: Such mixing will not create usable network connectivity. This BiDi SFP applies WDM multiplexing on one fiber strand, whereas ordinary dual‑fiber SFP sends signals across two separate fiber cores. You should always pair it with reverse‑wavelength matching BiDi modules rather than mixing dual‑fiber optics.

Q4: What kind of network fault will occur if I install BiDi SFP modules with identical wavelength setting on both sides of fiber span? A4: You will face complete link outage alongside LOS alarms reported by connected network switches. Both sides transmit light at 1490 nm and receive at 1550 nm without wavelength cross‑matching. One side must use Tx1490/Rx1550 and the remote‑end must adopt Tx1550/Rx1490 to establish complete bidirectional WDM transmission path.

Q5: During field installation work, how do technicians tell apart Tx1490 and Tx1550 BiDi SFP units rapidly? A5: Refer to printed marking content on SFP metal housing shell. Every BiDi SFP is clearly printed with Tx‑Rx wavelength parameters. Do not judge merely according to plastic latch color; double‑check label information before cabling to prevent wavelength‑mismatch accidents.

Q6: Which fiber‑cable type should be prepared for field deployment of this Dell‑compatible long‑reach BiDi SFP? A6: Simplex‑LC terminated OS1 / OS2 single‑mode patch cords are mandatory. Duplex‑LC and multimode fiber are incompatible for 80 km single‑strand BiDi transmission scenarios. Thoroughly clean simplex‑LC connector surfaces before plug‑in to cut insertion loss and reduce random LOS fault risks for long‑distance enterprise links.

Q7: What optical chip composition is built inside this 80‑km‑reach Dell‑compatible BiDi SFP? A7: This BiDi SFP integrates DFB laser transmitter paired with PIN receiver component. PIN receiver delivers receiving sensitivity down to ‑26 dBm. This mature chipset delivers consistent signal performance under real‑world 80 km single‑mode fiber enterprise deployment scenarios.

Q8: What actual link‑budget performance can network planners expect when deploying this 80 km BiDi SFP on practical enterprise fiber infrastructure? A8: This module provides TX output power 0‑5 dBm and RX sensitivity better than ‑26 dBm, delivering minimum 26 dB overall link budget. Typical single‑mode fiber brings around 0.25 dB/km attenuation in 1490‑1550 nm wavelength band. Set aside extra loss margin for field splices and connector joints; keep total accumulated loss under 26 dB for reliable full‑distance operation.

Q9: Will this long‑haul 80 km BiDi SFP consume far more power than short‑range 10‑20 km BiDi SFP alternatives? A9: Power consumption is strictly controlled below 1 W. It adopts proven DFB laser plus PIN‑receiver chip architecture, fully complying with SFP MSA power specification and brings no overload risk for standard SFP host switch ports.

Q10: For enterprise network‑upgrade initiatives, what practical value can single‑fiber BiDi SFP bring compared to traditional dual‑fiber gigabit SFP? A10: BiDi SFP halves fiber‑core consumption for sites suffering fiber‑pair constraints. WDM technology supports bidirectional gigabit traffic over one fiber strand. It is well‑suited for cross‑campus links, branch backhaul and network‑renovation projects where laying new fiber pairs generates high capital outlay.

Q11: Is this BiDi SFP suitable for being inserted into existing CWDM or DWDM wavelength‑multiplexing network setup? A11: It is not recommended for CWDM/DWDM system deployment. Its fixed 1490 nm /1550 nm operating wavelengths overlap common CWDM channel bands. Choose purpose‑built CWDM‑grade optical transceivers if wavelength‑multiplexing networking forms part of your enterprise project plan.

Q12: What factory warranty protection can buyers obtain for bulk‑ordered Dell‑compatible BiDi SFP? A12: HYTOPTODEVICE offers a standard 5‑year factory warranty covering manufacturing‑caused hardware defects. Warranty takes effect for hardware failures appearing within rated 0‑70 °C commercial operating scope; damage triggered by ESD surge, polluted fiber‑connector faces, optical‑receiver overload and improper field‑handling are not covered under warranty terms.

Q13: Why is the unit price of 80 km‑level BiDi SFP higher than 10 km or 20 km short‑reach BiDi SFP products? A13: High‑power DFB/EML laser components, high‑sensitivity PIN receivers and precise wavelength‑isolation filters push up manufacturing costs. Short‑distance BiDi transceivers can adopt lower‑cost optical‑component schemes. Additional fine‑tuned optical calibration and long‑haul‑oriented burn‑in aging steps further increase production expenditure.

Q14: When Rx Power Low or LOS alarms pop‑up on Dell switches running this BiDi SFP, what troubleshooting steps should network engineers follow? A14: Start fault diagnosis from physical‑layer field connections. Clean simplex‑LC patch‑cable connector end‑faces, reseat BiDi SFP firmly inside SFP slots, double‑check wavelength‑pairing correctness and test end‑to‑end total optical loss. If measured loss exceeds module‑specified link budget, shorten transmission span or deploy fiber amplifier hardware for extra‑long single‑fiber links.

Q15: What underlying factors lead to unstable intermittent link‑flapping phenomenon on enterprise single‑fiber BiDi SFP connections? A15: Link‑flapping is mostly triggered by physical‑layer faults associated with PIN‑receiver performance. Root causes include contaminated fiber‑connector surfaces, insufficient receiving optical margin, reversed wavelength pairing, ESD‑damaged PIN‑receiver or excessive cabinet internal temperature. Fetch DDM real‑time optical‑power and temperature readouts to speed‑up fault‑source identification work.


Packaging & Custom OEM Solutions

Individually sealed in ESD-safe packaging and ready to ship. We offer tailored OEM solutions—including custom logos and private labeling—to support high-volume distributors,wholesaler and system integrators.
HYTOPTODEVICE sfp-10g-sr optical transceiver module custom package

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% hardware-tested compatibility with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Full product range coverage:1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T
  • In-stock supply & fast global shipping, average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.
  • Private Label support - EEPROM / firmware customization support

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • 1000BASE‑BX‑U SFP BIDI TRANSCEIVER FROM HYTOPTODEVICE
  • 80km single‑strand BiDi SFP  FROM HYTOPTODEVICE
  • HYTOPTODEVICE plug‑and‑play compatible BiDi SFP optical transceiver 80km SMF 1.25G
  • 1490/1550nm simplex LC gigabit module 80KM BIDI

Download