• HYTOPTODEVICE compatible 40G QSFP+ SR4 transceiver 850nm 400m MPO MMF
  • HYTOPTODEVICE 40GBASE‑CSR4 VCSEL QSFP+ module MPO‑12 connector for  data‑center multi‑mode transmission, Support 4x10G Connectivity
  • HYTOPTODEVICE zero‑alarm plug‑and‑play  qsfp+ sr4  replacement 40G SR4 optical transceiver 400m
  • HYTOPTODEVICE zero‑alarm plug‑and‑play   qsfp+ 40g  replacement 40G SR4 400m optical module
  • HYTOPTODEVICE compatible 40G QSFP+ SR4 transceiver 850nm 400m MPO MMF
  • HYTOPTODEVICE 40GBASE‑CSR4 VCSEL QSFP+ module MPO‑12 connector for  data‑center multi‑mode transmission, Support 4x10G Connectivity
  • HYTOPTODEVICE zero‑alarm plug‑and‑play  qsfp+ sr4  replacement 40G SR4 optical transceiver 400m
  • HYTOPTODEVICE zero‑alarm plug‑and‑play   qsfp+ 40g  replacement 40G SR4 400m optical module

Dell Force10 0MV31 Compatible QSFP+ 40G CSR4 Transceiver | 40GBASE‑CSR4 850nm 400m MPO-12 Support 4x10G Breakout Connectivity Bulk Wholesale

Buy factory direct Dell Force10 0MV31 compatible QSFP+ 40G CSR4 transceiver. 40GBASE-CSR4 850nm module supports 300m OM3 / 400m OM4 long range, MPO-12 connector and 4x10G breakout connectivity. Pre-flashed EEPROM fixes QSFP+ 40G CSR4 unsupported transceiver errors & link flapping on Dell Force10 switches. Bulk wholesale custom EEPROM for data center leaf-spine fabric upgrade and 10G/40G hybrid network migration.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QSFP-40G-CSR4
2 Alcatel-Lucent  QSFP-4X10G-SR 
3 Arista  QSFP-40G-XSR4
4 Dell Force10 0MV31 
5 H3C  QSFP-40G-CSR4-MM850
6 HPE Aruba  JH233A
7 HPE H3C  JG709A
8 Huawei  QSFP-40G-eSR4 
9 Juniper  QFX-QSFP-40G-ESR4
10 NVIDIA(Mellanox)  MC2210411-SR4E



Description

Arista QSFP-40G-XSR4 Compatible QSFP+ 40G SR4 Transceiver Module | 40GBASE‑XSR4 850nm 400m MPO Support 4x10G Breakout Connectivity Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE Dell Force10 0MV31 compatible QSFP+ 40G CSR4 transceiver is an upgraded long-reach 40GBASE-CSR4 optical module, perfectly replacing original Dell Force10 0MV31 optics. Operating at 850nm with MPO-12 connector, this high-performance QSFP+ 40G CSR4 module delivers 300m transmission on OM3 multimode fiber and 400m ultra-long reach on OM4 fiber, solving the short-distance limitation of standard QSFP+ 40G SR4 modules for large data center cross-rack deployment. It supports native 4x10G breakout connectivity, enabling flexible 10G/40G hybrid network migration and maximizing port utilization without fiber rewiring. Pre-flashed with exclusive Dell Force10 EEPROM, this plug-and-play QSFP+ 40G CSR4 transceiver thoroughly fixes common industry pain points including Dell Force10 unsupported transceiver errors and QSFP+ 40G CSR4 link flapping. Equipped with real-time DDM monitoring and hot-swap function, it supports 24/7 stable operation for leaf-spine fabric construction and legacy network hardware refresh. We provide cost-effective bulk wholesale and custom EEPROM services for enterprise IDC and system integration projects.


Key Technical Specifications 

Dell Force10 Compatible 0MV31   Vendor Name HYTOPTODEVICE
Form Factor QSFP+ Max Data Rate 42Gbps (4x 10.5Gbps)
Wavelength 850nm Max Distance 300m@OM4/400m@OM3
Connector MTP/MPO Transmitter Type VCSEL 850nm
Cable Type MMF Receiver Type PIN
TX Power -8.0~2.0dBm Receiver Sensitivity < -13dBm
Power Consumption ≤1.5W Modulation NRZ
Protocols 40G Ethernet, SATA/SAS3, IEEE 802.3ba, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)


For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Choice: Only supports OM3/OM4/OM5 multimode MPO-12 fiber; single-mode fiber cannot be used for 850nm wavelength transmission.

  • Distance Limit: Max 300m (OM3) / 400m (OM4). Dirty end faces, excessive splicing and sharp bending will reduce actual transmission distance.

  • Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Installation Specification: Hot‑plug supported; keep MPO connector end‑faces clean, observe minimum fiber‑bend radius requirements.

  • Port Configuration: Confirm host ports are set to 40G SR4 mode; do not mix SR4 with other 40G optical standards on the same link.
  • Operating Environment: 0°C-70°C commercial temperature, ensure cabinet ventilation to avoid overheating attenuation.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices 

1. Supported Hardware & Firmware

Pre-calibrated Dell Force10 dedicated EEPROM ensures 100% plug-and-play recognition, completely avoiding QSFP+ 40G CSR4 unrecognized port and link instability issues. All modules pass real-machine aging testing for mainstream Force10 platforms.
Validated Dell Force10 Platforms:
  • Dell Force10 Z9000 40G core data center switches
  • Dell Force10 S6000 high-density 40G enterprise switches
  • Dell Force10 S4810 / S4820T access aggregation switches
  • All Force10 devices with native 40GBASE-CSR4 QSFP+ ports

2. Multi-Brand Cross Compatibility

Built to MSA standards, this QSFP+ 40G SR4 XSR4 breakout module works with Cisco, HPE, Dell and other major brand switches for mixed-vendor leaf-spine fabric.

3. Free Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility
  • Sample testing available before bulk orders for project validation
  • Private label customization and professional deployment guides
  • Rigorous batch quality consistency control
  • Custom EEPROM configuration for special and legacy network setups
  • Free EEPROM recoding with 24/7 technical support


Primary Application Scenarios

  • Data Center Leaf-Spine Fabric 400m OM4 extended reach supports long-distance cross-rack interconnection for Dell Force10 data center fabric, ensuring stable low-latency 40G transmission.
  • 10G/40G Hybrid Network Upgrade 4×10G breakout function enables flexible port splitting, reusing existing multimode fiber for cost-effective staged network migration.
  • 40G High-Speed Trunk Aggregation Ideal for TOR-to-core uplink aggregation, reliably carrying virtualization, cloud and high-concurrency enterprise traffic.
  • Dell Force10 Hardware Refresh Direct replacement for legacy 0MV31 modules, resolving common link flapping and transceiver recognition failures.
  • Large-Scale Bulk Deployment MSA-compliant compatibility suits multi-vendor hybrid networks, perfect for enterprise and operator data center bulk projects.

Connectivity Solutions(Applications) 

1.40GbE Switch-to-Switch Connectivity
HYTOPTODEVICE 40G‑to‑40G switch‑to‑switch interconnection short‑reach SR4  module for core trunk links

2.40GbE Structured Cabling Interconnect

HYTOPTODEVICE 40G high‑speed stacking module for  enterprise campus network upgrade

3.40GbE Switch-to-NIC Interconnection

HYTOPTODEVICE 40G switch‑to‑server NIC high‑speed uplink module for server cluster connections

4. 40G to 4x10G Breakout Connectivity
hytoptodevice QSFP+ 40G CSR4 4x10G breakout connectivity for 10G/40G network upgrade

5.Leaf-Spine Architecture
400m long reach QSFP+ 40G CSR4 for data center leaf spine fabric



The Core Feature

1. 40G Connectivity for Data Center

High speed, low overhead. The QSFP+ 40G transceiver brings gigabit-class throughput to dense data center racks while drawing less power and taking up less space.


HYTOPTODEVICE 40G SR4 QSFP+ transceiver helps reduce CAPEX for data‑center upgrade projects


2.
100% Compatibility-Tested for Reliable Deployment

Deploy with confidence: every 40G QSFP+ module is rigorously tested for compatibility in the target switch environment — no surprises, no downtime. Not sure it fits? Get our Compatibility Video on request.

HYTOPTODEVICE Plug-and-play QSFP+ 40G CSR4 transceiver no unsupported error for switch

3. 100% Individually Tested for Peak Performance

Every unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE 40G SR4 QSFP+ module comprehensive factory testing stable performance for various platforms bulk wholesale orders


FAQ 

Q1: Will this QSFP+ 40G CSR4 module work in my Dell Force10 switch? A: This HYTOPTODEVICE compatible QSFP+ 40G CSR4 transceiver can run on Dell Force10 switches with preloaded matching EEPROM data. We request your exact switch model and firmware version before purchase to validate full interoperability and avoid unexpected port recognition issues.

Q2: What to do when Dell Force10 switch reports unsupported transceiver after module installation? A: Vendor lock mismatch in module coding is the main trigger for this alert. HYTOPTODEVICE modules are pre-flashed with correct OEM coding; if the warning remains, check port settings, upgrade switch firmware or reach out to our team for EEPROM recoding service.

Q3: Can this 40G CSR4 transceiver integrate with my current 10G SFP+ network setup? A: It can connect to your existing 10G SFP+ hardware via breakout cabling. This QSFP+ 40G CSR4 module splits one 40G port into 4 independent 10G links using MPO-to-4×LC breakout cable, supporting smooth staged network migration for your data center.

Q4: Can I connect this QSFP+ 40G CSR4 module directly to DAC or AOC cable on the far end? A: Direct connection with DAC or AOC is not supported. This optical CSR4 transceiver only pairs with another optical SR4/CSR4 transceiver or qualified media converter, since DAC/AOC use different electrical interfaces and cannot form valid optical links.

Q5: Does this HYTOPTODEVICE QSFP+ 40G CSR4 support breakout into four separate 10G channels? A: Yes, breakout to four 10G links is fully supported. Using an MPO-to-4×LC fanout cable, a single 40G CSR4 port can feed four 10G SFP+ ports, which helps customers reuse existing 10G multimode infrastructure for network upgrade projects.

Q6: Is this Dell Force10 compatible QSFP+ 40G CSR4 transceiver hot-swappable during operation? A: This QSFP+ 40G CSR4 module supports hot swap. You can install or replace the transceiver without powering off your Dell Force10 switch, just follow standard ESD protection practices to prevent static damage during handling.

Q7: Which cable type should I buy for connecting 10G equipment with this 40G CSR4 module? A: Cable selection depends on your networking mode. Use MPO-to-4×LC duplex fanout cable for 4×10G breakout deployment, while MPO-to-MPO trunk cable is required for direct 40G-to-40G optical interconnection with HYTOPTODEVICE CSR4 transceivers.

Q8: How critical is MPO connector cleaning for QSFP+ 40G CSR4 fiber links? A: MPO connector cleanliness is extremely critical for reliable CSR4 links. Dust and dirt on MPO ferrule is the top cause of link dropouts and may permanently damage VCSEL laser; inspect and clean the connector before every insertion of HYTOPTODEVICE modules.

Q9: How to confirm the QSFP+ 40G CSR4 transceiver you supply is genuine and not refurbished? A: You can verify authenticity by requesting full batch documentation. HYTOPTODEVICE provides serial number traceability, factory test reports, batch records and original packaging photos, with DOA replacement and formal warranty to guarantee non-refurbished brand-new modules.

Q10: What warranty terms and RMA process do you offer for bulk QSFP+ 40G CSR4 orders? A: HYTOPTODEVICE provides 5-year warranty and streamlined RMA service for this QSFP+ 40G CSR4 transceiver. Simply report the fault, return the defective module, and we arrange replacement, you can get all policy terms confirmed in written contract before bulk purchase.

Q11: Will the optical performance of this QSFP+ 40G CSR4 degrade over long operation time? A: Slow laser aging is normal and can be monitored via built-in DDM function. HYTOPTODEVICE high-quality CSR4 modules sustain stable links for multiple years; sudden link failures are mostly caused by fiber contamination, overheating or ESD instead of natural laser aging.

Q12: Why is your QSFP+ 40G CSR4 transceiver priced lower than original OEM optical modules? A: Our lower price comes from direct factory supply without OEM brand premium and multi-level channel markup. HYTOPTODEVICE QSFP+ 40G CSR4 transceivers match OEM functionality for standard data center applications; cost reduction does not mean compromised product quality.

Q13: What support will I get if the QSFP+ 40G CSR4 transceiver arrives dead on arrival? A: HYTOPTODEVICE offers free replacement for DOA modules within 30 days after receiving goods. Keep the original package and test logs ready, so we can speed up the RMA replacement process for your QSFP+ 40G CSR4 bulk order.

Q14: Are test samples of QSFP+ 40G CSR4 available for pre-order compatibility verification? A: HYTOPTODEVICE provides sample options for qualified buyers. You can order paid samples, and the sample cost can be credited back when you place your first bulk order, allowing you to test compatibility on Dell Force10 hardware before large-scale deployment.

Q15: What is the correct installation method for this QSFP+ 40G CSR4 optical transceiver? A: Gentle alignment and insertion is the correct installation method. Align the module with the port keyway, push softly until fully seated and lock the latch; never force insertion, as misalignment may bend internal pins and damage your Dell Force10 switch port and HYTOPTODEVICE transceiver.

Packaging & Custom OEM Solutions

Every 40G QSFP+ SR4 module ships in sealed ESD-safe packaging, ready for same-day dispatch. Bulk orders offer OEM customization—logo printing and private labeling—tailored for network distributors, integrators, and enterprise deployments.

cost‑effective 40G short‑reach optical module with custom package


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • HYTOPTODEVICE compatible 40G QSFP+ SR4 transceiver 850nm 400m MPO MMF
  • HYTOPTODEVICE 40GBASE‑CSR4 VCSEL QSFP+ module MPO‑12 connector for  data‑center multi‑mode transmission, Support 4x10G Connectivity
  • HYTOPTODEVICE zero‑alarm plug‑and‑play  qsfp+ sr4  replacement 40G SR4 optical transceiver 400m
  • HYTOPTODEVICE zero‑alarm plug‑and‑play   qsfp+ 40g  replacement 40G SR4 400m optical module

Download