• 100BASE-FX 1310nm 2km MMF SFP Transceiver Compatible with Cisco Fast Ethernet
  • Bulk Wholesale 100Mbps MMF SFP Module for Cisco Enterprise Switch Network Upgrade
  • DDM Supported 100BASE-FX SFP Transceiver with Real-Time Optical Diagnostic Function
  • Zero Alarm Plug and Play Cisco Compatible 100M SFP Fiber transceiver Module
  • 100BASE-FX 1310nm 2km MMF SFP Transceiver Compatible with Cisco Fast Ethernet
  • Bulk Wholesale 100Mbps MMF SFP Module for Cisco Enterprise Switch Network Upgrade
  • DDM Supported 100BASE-FX SFP Transceiver with Real-Time Optical Diagnostic Function
  • Zero Alarm Plug and Play Cisco Compatible 100M SFP Fiber transceiver Module

Cisco GLC-FE-100FX-RGD  Compatible 100BASE-FX SFP Optical Transceiver(Industrial) | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE

High-quality Cisco GLC-FE-100FX compatible 100BASE-FX SFP optical transceiver. 1310nm 2km multimode fiber SFP module with DDM monitoring. Factory direct bulk wholesale 100M MMF SFP transceiver for Cisco Fast Ethernet network upgrades. Support bulk wholesale, private label, custom EEPROM programming and OEM for global importers, distributors and system integrators.
NO. Brand  Compatible P/N Remarks
1 Cisco  GLC-FE-100FX-RGD  IND
2 Cisco GLC-FE-100FX
3 Brocade  E1MG-100FX-OM 
4 Juniper  EX-SFP-1FE-FX 
5 H3C  SFP-FE-SX-MM1310-A 
6 HPE(H3C)  JD102A
7 HPE(Procurve)  J9054B
8 Palo Alto Networks  PAN-SFP-100BASE-FX
9 Extreme MGBIC-LC04
10 D-Link DEM-211 IND
Description

Cisco GLC-FE-100FX Compatible 100BASE-FX SFP Optical Transceiver | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE Cisco GLC-FE-100FX compatible SFP optical transceiver is a fully compliant drop-in replacement for original Cisco 100BASE-FX multimode modules. Designed for Fast Ethernet networking, this 1310nm MMF SFP transceiver supports stable 2-kilometer transmission over standard multimode fiber, perfectly matching the official GLC-FE-100FX protocol and optical performance specifications.
Custom-calibrated EEPROM firmware enables zero-alarm plug-and-play recognition on all Cisco dual-rate 100M/1G SFP ports, requiring no manual configuration or command unlocking. Every 100BASE-FX SFP module undergoes strict aging testing and optical parameter calibration, delivering consistent batch quality. It is the ideal cost-effective solution for legacy Cisco network renovation, multimode fiber link deployment and large-volume bulk wholesale projects.

Key Technical Specifications

 Cisco Compatible GLC-FE-100FX Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 100Mbps
Wavelength 1310nm Max  Distance 2KM
Connector Duplex LC Transmitter Type FP 1310nm
Cable Type MMF Receiver Type PIN
TX Power -18~-10dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤1W Receiver Overload -8.0dBm
Protocols IEEE802.3ab, GR-468, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Port Matching

    Use standard 50/125µm or 62.5/125µm duplex multimode fiber (MMF) with LC-PC/UPC connectors. Single-mode fiber is not supported and will fail to reach 2km. Ensure the SFP port supports 100Mbps mode before insertion.

  • Installation & Hot-Swap Rules

    Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.

  • Link Loss Budget

    Offers a 6–11dB link budget for 2km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.

  • Operating Environment

    Commercial grade: 0°C to 70°C in indoor environments. For outdoor, high temperature, or harsh environments, select Industrial Grade (-40°C to 85°C). Keep away from extreme moisture and dust for long-term stability.

  • Real-Time Monitoring (DDM)

    Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.

  • Bulk Deployment

    Standardize fiber types and port settings across enterprise LAN or industrial networks for consistent performance.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Specially tuned firmware matches Cisco official authentication protocols, enabling zero-warning, zero-error operation on all Cisco Fast Ethernet and dual-rate SFP ports without transceiver mismatch logs or port shutdown issues.
  • Cisco Catalyst 2960 / 3560 / 3750 Fast Ethernet Switch Series
  • Cisco ISR 1900 / 2900 / 3900 Router SFP Ports
  • Cisco Industrial Ethernet & SmartGrid Network Platforms
  • Universal Cisco 100M/1000BASE-X dual-rate SFP ports

2. Multi-Brand Cross Compatibility

This 100BASE-FX SFP transceiver complies with global MSA industry standards, supporting stable interconnection with mainstream brand network devices. Custom firmware is available for mixed-vendor multimode fiber network batch deployment.

3. Free Value-Added Services

We offer exclusive free value-added services for all  sfp optical transceivers  to reduce your project deployment and maintenance costs.
  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Cost-effective wholesale for large-scale deployment
  • Free custom EEPROM programming for special and legacy network environments

Primary Application Scenarios

  • Enterprise indoor 2km short-distance multimode fiber interconnection
  • Office building cross-room and floor 100Mbps fiber link construction
  • Legacy Cisco Fast Ethernet multimode network SFP module replacement
  • Campus, factory and monitoring system short-range fiber transmission
  • Bulk upgrade and reconstruction of old multimode fiber network links

Connectivity Solutions(Applications)

1.100BASE to 100BASE for Switch-Switch
Pair two GLC-FE-100FX SFP modules with OM1/OM2/OM3/OM4 multimode fiber to build 100Mbps point-to-point fiber links up to 2km, ideal for indoor switch interconnection in offices and campuses.

2.100BASE to 100BASE for Switch-Media Converter

Use GLC-FE-100FX SFP on Cisco switches with a 100BASE-FX media converter to realize optical-to-electrical conversion, enabling RJ45 legacy devices to join fiber network smoothly.
HYTOPTODEVICE 100BASE‑FX Switch to Media Converter Optical Electrical Conversion Solution

3.100BASE Structured Cabling

Deploy GLC-FE-100FX SFP modules as standard fiber access ports for enterprise layered structured cabling, realizing unified, scalable 100Mbps multimode fiber network deployment.
HYTOPTODEVICE Enterprise 100BASE‑FX Multimode Fiber Structured Cabling System Solution

The Core Feature

1. Low-Power Data Center Efficient Connectivity

With ultra-low power consumption below 1W, this 100BASE SFP provides stable, cost-effective Fast Ethernet connectivity. It is an economical solution for data center, campus and enterprise low-speed access networking.

Low Latency 2km 1310nm MMF SFP Module for Cisco Legacy Network Renovation


2.
Verified Host Interoperability for Devices

Pre-flashed EEPROM supports hot-swap plug-and-play. The module is fully recognized by mainstream Cisco devices without alarms or configuration adjustments, enabling seamless network replacement and upgrade.
Zero-Alarm Plug and Play 100BASE-FX SFP Transceiver for Cisco Fast Ethernet Devices

3.Rigorous Testing, Uncompromising Reliability

100% factory tested and aged SFP transceiver with uniform batch quality, ideal for large-scale replacement and bulk procurement of Cisco multimode fiber modules.

Factory Tested 100BASE-FX MMF SFP Module for Enterprise Bulk Procurement Projects


FAQ

Q1: Can Cisco GLC-FE-100FX 100BASE-FX SFP work with single-mode fiber (SMF)?
A: No. The GLC-FE-100FX is a dedicated multimode 100BASE-FX SFP transceiver designed exclusively for OM1/OM2 MMF. Single-mode fiber has different core diameter and optical characteristics, causing severe signal attenuation and no link up. Always use standard multimode fiber for this Cisco compatible SFP module.

Q2: What is the maximum reliable transmission distance of GLC-FE-100FX SFP transceiver?
A: The standard working distance of this 100BASE-FX SFP module is 2km over compliant multimode fiber. Although it may connect at slightly longer distances in low-loss environments, exceeding 2km will cause increased BER, packet loss and unstable link flapping in long-term operation.

Q3: Can 100BASE-FX MMF SFP transceiver interconnect with 100BASE-LX SMF modules?
A: Interconnection is not supported. 100BASE-FX uses 1310nm multimode transmission, while 100BASE-LX relies on single-mode fiber. Mismatched fiber medium, core size and optical power budget lead to complete link failure and cannot communicate normally.

Q4: Will third-party GLC-FE-100FX SFP trigger Cisco unsupported transceiver errors?
A: Our customized GLC-FE-100FX SFP transceiver adopts Cisco-matched EEPROM firmware, which passes official device authentication. It will not trigger unsupported transceiver logs, port errors or shutdown restrictions on Catalyst switches and Cisco routers.

Q5: Can gigabit SFP ports automatically adapt to 100BASE-FX 100Mbps SFP module?
A: Yes. All Cisco dual-rate 100M/1G SFP ports support automatic speed negotiation and downgrade. This GLC-FE-100FX SFP transceiver can be automatically recognized and locked at 100Mbps speed without manual port configuration.

Q6: Why does my 100BASE-FX MMF link show link down but no physical damage?
A: Common causes include mismatched single/multimode fiber, dirty LC connector end faces, excessive fiber bending radius, or incorrect port duplex/rate settings. Cleaning connectors and confirming MMF matching can resolve most link down failures.

Q7: What is the difference between 100BASE-FX and 100BASE-TX Fast Ethernet standards?
A: 100BASE-FX is a fiber-based 100Mbps standard using multimode SFP transceivers for 2km long-distance transmission. 100BASE-TX relies on copper RJ45 cables with only 100m transmission distance. GLC-FE-100FX SFP modules are used for fiber-optic extended Fast Ethernet links.

Q8: Does 1310nm 100BASE-FX SFP module support DDM DOM monitoring on Cisco devices?
A: Yes. This GLC-FE-100FX compatible SFP transceiver integrates complete SFF-8472 DDM/DOM function. Cisco devices can read real-time optical power, temperature and voltage data for daily network operation and fault troubleshooting.

Q9: Can GLC-FE-100FX SFP module be used for industrial outdoor long-term deployment?
A: This commercial-grade 100BASE-FX SFP transceiver supports 0°C~70°C stable operation, suitable for indoor and sheltered industrial scenarios. For outdoor high temperature, humidity and lightning environments, industrial-grade optical modules are recommended to avoid accelerated aging.

Q10: Will using compatible GLC-FE-100FX SFP void my Cisco switch warranty?
A: No. Our 100BASE-FX SFP transceiver fully complies with MSA and IEEE industry standards, with standard optical parameters and electrical signals. It causes no hardware damage or protocol conflicts to Cisco equipment and does not void the original device warranty.

Q11: Why do MMF 100BASE-FX links have higher packet loss than SMF links?
A: Multimode fiber has inherent mode dispersion compared with single-mode fiber. Improper fiber laying, dirty connectors or aging MMF cables will amplify packet loss. Using high-quality OM2 fiber and regular port cleaning can effectively optimize link stability.

Q12: Is UPC or APC connector better for 100BASE-FX SFP transceiver deployment?
A: Standard UPC-polished LC connectors are mandatory for GLC-FE-100FX 100BASE-FX SFP modules. APC connectors produce excessive reflectance and insertion loss, leading to unstable MMF links, random flapping and packet loss.

Q13: How to distinguish genuine and high-quality compatible GLC-FE-100FX SFP transceiver?
A: Premium compatible 100BASE-FX SFP modules feature standard -15~-8dBm transmit power, -32dBm high sensitivity, complete DDM monitoring, and zero-alarm recognition on Cisco devices. Our modules pass full optical testing and aging screening to match original GLC-FE-100FX performance.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • 100BASE-FX 1310nm 2km MMF SFP Transceiver Compatible with Cisco Fast Ethernet
  • Bulk Wholesale 100Mbps MMF SFP Module for Cisco Enterprise Switch Network Upgrade
  • DDM Supported 100BASE-FX SFP Transceiver with Real-Time Optical Diagnostic Function
  • Zero Alarm Plug and Play Cisco Compatible 100M SFP Fiber transceiver Module

Download