• Cisco GLC-FE-100FX  Compatible 100BASE-FX SFP Optical Transceiver | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE
  • Cisco GLC-FE-100FX  Compatible 100BASE-FX SFP Optical Transceiver | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE
  • Bulk Wholesale 10km 100BASE-LX SFP Transceiver with DDM Monitoring
  • Zero Alarm Plug and Play Cisco Compatible 100M SFP Fiber transceiver Module
  • Cisco GLC-FE-100FX  Compatible 100BASE-FX SFP Optical Transceiver | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE
  • Cisco GLC-FE-100FX  Compatible 100BASE-FX SFP Optical Transceiver | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE
  • Bulk Wholesale 10km 100BASE-LX SFP Transceiver with DDM Monitoring
  • Zero Alarm Plug and Play Cisco Compatible 100M SFP Fiber transceiver Module

Cisco GLC-FE-100FX  Compatible 100BASE-FX SFP Optical Transceiver | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE Cisco GLC‑FE‑100LX compatible 100M SFP transceiver supports 100BASE-LX 100Mbps Fast Ethernet, 1310nm wavelength and 10km single-mode transmission. Featuring DDM monitoring and zero-alarm Cisco compatibility, this cost-effective SFP module is ideal for campus LAN, commercial network and bulk ISP fiber link upgrades.
NO. Brand  Compatible P/N Remarks
1 Cisco  GLC-FE-100FX-RGD  IND
2 Cisco GLC-FE-100FX
3 Brocade  E1MG-100FX-OM 
4 Juniper  EX-SFP-1FE-FX 
5 H3C  SFP-FE-SX-MM1310-A 
6 HPE(H3C)  JD102A
7 HPE(Procurve)  J9054B
8 Palo Alto Networks  PAN-SFP-100BASE-FX
9 Extreme MGBIC-LC04
10 D-Link DEM-211 IND
Description

Cisco GLC‑FE‑100LX Compatible 100M SFP Optical Transceiver | 100BASE‑LX 1310nm 10km Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE GLC‑FE‑100LX compatible 100M SFP transceiver is a plug-and-play replacement for Cisco original modules. It complies with 100BASE-LX standard, adopting 1310nm wavelength and duplex LC interface to support 10km stable transmission over single-mode fiber. Equipped with FP laser and PIN receiver, it supports SFF-8472 DDM real-time monitoring for reliable link operation.
Pre-flashed EEPROM ensures zero-alarm recognition on Cisco devices with no extra configuration. Built per MSA and IEEE 802.3 standards, this low-power SFP delivers stable batch consistency, suitable for campus inter-building links, commercial Ethernet, ISP access and bulk network upgrades.

Key Technical Specifications

 Cisco Compatible GLC-FE-100FX Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 100Mbps
Wavelength 1310nm Max  Distance 2KM
Connector Duplex LC Transmitter Type FP 1310nm
Cable Type MMF Receiver Type PIN
TX Power -18~-10dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤1W Receiver Overload -8.0dBm
Protocols IEEE802.3ab, GR-468, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Port Matching

    Use standard G.652.D duplex single-mode fiber (SMF) with LC-PC/UPC connectors. Multimode fiber is not supported and will fail to reach 10km. Ensure the SFP port supports 100Mbps mode before insertion.

  • Installation & Hot-Swap Rules

    Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.

  • Link Loss Budget

    Offers a 20dB link budget for 10km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.

  • Operating Environment

    Commercial grade: 0°C to 70°C in indoor environments. Keep away from extreme heat, moisture, and dust for long-term stability.

  • Real-Time Monitoring (DDM)

    Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.

  • Bulk Deployment

    Standardize fiber types and port settings across enterprise LAN or ISP deployments for consistent performance.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Pre-optimized EEPROM enables hot-swap plug-and-play deployment with zero alarms on Cisco Fast Ethernet ports, fully matching the performance of original GLC-FE-100LX modules without extra configuration.
  • Cisco Catalyst 2960‑X / 3560 / 3750 / 3850 Fast‑Ethernet switch series
  • Cisco ME 3400 / ME 3600 Metro Access Switches
  • Cisco IE2000 / IE3000 Industrial Ethernet switches
  • Cisco ISR 1900 / 2900 / 3900 integrated service router SFP ports

2. Multi-Brand Cross Compatibility

Designed per universal MSA standards, this 100M SFP works stably with Huawei, H3C, ZTE, Juniper and other mainstream devices. Custom firmware is available for multi-vendor network renovation and bulk deployment.
  • Enterprise fast‑ethernet routing & switching equipment
  • ISP access and commercial managed fiber switches

3. Free Value-Added Services

We offer exclusive free value-added services for all  sfp optical transceivers  to reduce your project deployment and maintenance costs.
  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Cost-effective wholesale for large-scale deployment
  • Free custom EEPROM programming for special and legacy network environments

Primary Application Scenarios

  • Ideal for Internet Service Provider (ISP) Fast Ethernet communication links
  • Widely applied in Enterprise LAN & SAN Networks optical transmission
  • Perfect for Data Center LAN & SAN Networks fiber link deployment
  • Suitable for campus inter-building and campus long-distance optical links
  • Reliable for security surveillance and legacy network module replacement

Connectivity Solutions(Applications)

1.100BASE to 100BASE for Switch-Switch
Deploy paired GLC-FE-100LX compatible SFPs to build reliable point-to-point switch fiber links. It supports error-free 100Mbps transmission up to 10km over G.652.D single-mode fiber, ideal for enterprise inter-building networking and fiber expansion.

2.100BASE to 100BASE for Switch-Media Converter
Deploy paired GLC-FE-100LX compatible SFPs to build reliable point-to-point switch fiber links. It supports error-free 100Mbps transmission up to 10km over G.652.D single-mode fiber, ideal for enterprise inter-building networking and fiber expansion.



3.100BASE Structured Cabling
Deploy paired GLC-FE-100LX compatible SFPs to build reliable point-to-point switch fiber links. It supports error-free 100Mbps transmission up to 10km over G.652.D single-mode fiber, ideal for enterprise inter-building networking and fiber expansion.

The Core Feature

1. Low-Power Data Center Efficient Connectivity

With ultra-low power consumption below 1W, this 100BASE SFP provides stable, cost-effective Fast Ethernet connectivity. It is an economical solution for data center, campus and enterprise low-speed access networking.


2.
Verified Host Interoperability for Devices

Pre-flashed EEPROM supports hot-swap plug-and-play. The module is fully recognized by mainstream Cisco devices without alarms or configuration adjustments, enabling seamless network replacement and upgrade.

3.Rigorous Testing, Uncompromising Reliability

Each SFP undergoes wavelength calibration, power testing, 72-hour aging and 10km link testing. Full quality inspection ensures stable batch performance and long-term reliable operation for engineering projects.

HYTOPTODEVICE MSA Compliant Replacement Optical Transceiver Full Tested


FAQ

Q1: What standard does this GLC‑FE‑100LX compatible SFP follow?
A: It complies with IEEE 802.3 100BASE-LX and SFP MSA standards, fully compatible with original Cisco GLC-FE-100LX modules.

Q2: Does this 100BASE‑LX SFP support DDM / DOM diagnostic monitoring?
A: Yes, it supports SFF-8472 DDM/DOM real-time monitoring. You can check Tx/Rx power, temperature and voltage via switch CLI or web page for real-time link diagnosis.

Q3: Can this 100Mbps SFP run on Gigabit dual‑rate SFP ports?
A: Yes, it supports auto-negotiation on dual-rate Gigabit SFP ports, automatically downgrading to 100Mbps Fast Ethernet without manual configuration.

Q4: What fiber cable type should I use for GLC‑FE‑100LX 10 km link?
A: Use G.652.D duplex single-mode fiber with LC-P connectors. Multimode fiber cannot support 10km long-distance transmission for this module.

Q5: What is the typical maximum link budget for this 100BASE‑LX SFP module?
A: Featuring -15~-8dBm transmit power and -28dBm sensitivity, it offers about 20dB link budget, enough for 10km fiber transmission plus normal connector loss.

Q6: Is hot‑swap supported for this GLC‑FE‑100LX replacement SFP?
A: Fully supports MSA-standard hot-swap. Modules can be plugged/unplugged online without switch shutdown or reboot.

Q7: Can I use this transceiver for outdoor cabinet deployment?
A: This commercial-grade module works at 0°C~70°C for indoor scenarios. For outdoor and wide-temperature industrial use, please choose our industrial-grade version.

Q8: How to place correct bulk order for GLC‑FE‑100LX compatible SFP?
A: When ordering, confirm key specs: Cisco GLC-FE-100LX compatible, 100BASE-LX, 100Mbps, 1310nm, 10km, duplex LC with DDM function, and specify commercial/industrial grade.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • Cisco GLC-FE-100FX  Compatible 100BASE-FX SFP Optical Transceiver | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE
  • Cisco GLC-FE-100FX  Compatible 100BASE-FX SFP Optical Transceiver | 1310nm 2km MMF Bulk Wholesale | HYTOPTODEVICE
  • Bulk Wholesale 10km 100BASE-LX SFP Transceiver with DDM Monitoring
  • Zero Alarm Plug and Play Cisco Compatible 100M SFP Fiber transceiver Module

Download