• Cisco C30 DWDM‑SFP‑5333‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1553.33nm 100km 100GHz | HYTOPTODEVICE
  • HYTOPTODEVICE hot pluggable DWDM SFP transceiver module, gigabit network upgrade optical module
  • HYTOPTODEVICE high sensitivity APD DWDM transceiver module, carrier grade long haul optical transceiver
  • HYTOPTODEVICE bulk supply DWDM transceiver module, DDM monitoring gigabit telecom optical module
  • Cisco C30 DWDM‑SFP‑5333‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1553.33nm 100km 100GHz | HYTOPTODEVICE
  • HYTOPTODEVICE hot pluggable DWDM SFP transceiver module, gigabit network upgrade optical module
  • HYTOPTODEVICE high sensitivity APD DWDM transceiver module, carrier grade long haul optical transceiver
  • HYTOPTODEVICE bulk supply DWDM transceiver module, DDM monitoring gigabit telecom optical module

Cisco C45 DWDM‑SFP‑4135‑100 Compatible 1.25G DWDM Fiber Transceiver | 1000BASE-DWDM 1541.35nm 100km 100GHz | HYTOPTODEVICE

Get reliable Cisco C45 compatible 1.25G DWDM fiber transceiver from HYTOPTODEVICE. 1541.35nm 100GHz ITU‑T grid, 100km single‑mode reach, APD high‑sensitivity receiver. Buy bulk DWDM SFP modules for system integrator projects, metro backbone deployment and Cisco hardware replacement.
CHANEL Cisco Compatible P/N  CHANEL Cisco Compatible P/N
CH30 DWDM‑SFP‑5333‑100 CH46 DWDM‑SFP‑4056‑100
CH31 DWDM‑SFP‑5252‑100 CH47 DWDM‑SFP‑3977‑100
CH32 DWDM‑SFP‑5172‑100 CH48 DWDM‑SFP‑3898‑100
CH33 DWDM‑SFP‑5092‑100 CH49 DWDM‑SFP‑3819‑100
CH34 DWDM‑SFP‑5012‑100 CH50 DWDM‑SFP‑3740‑100
CH35 DWDM‑SFP‑4932‑100 CH51 DWDM‑SFP‑3661‑100
CH36 DWDM‑SFP‑4851‑100 CH52 DWDM‑SFP‑3582‑100
CH37 DWDM‑SFP‑4772‑100 CH53 DWDM‑SFP‑3504‑100
CH38 DWDM‑SFP‑4692‑100 CH54 DWDM‑SFP‑3425‑100
CH39 DWDM‑SFP‑4612‑100 CH55 DWDM‑SFP‑3347‑100
CH40 DWDM‑SFP‑4532‑100 CH56 DWDM‑SFP‑3268‑100
CH41 DWDM‑SFP‑4453‑100 CH57 DWDM‑SFP‑3190‑100
CH42 DWDM‑SFP‑4373‑100 CH58 DWDM‑SFP‑3112‑100
CH43 DWDM‑SFP‑4294‑100 CH59 DWDM‑SFP‑3033‑100
CH44 DWDM‑SFP‑4214‑100 CH60 DWDM‑SFP‑2955‑100
CH45 DWDM‑SFP‑4135‑100 CH61 DWDM‑SFP‑2877‑100
Description

Cisco C45 DWDM‑SFP‑4135‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1541.35nm 100km 100GHz | HYTOPTODEVICE

Product Overview
HYTOPTODEVICE C45 DWDM SFP fiber transceiver acts as drop‑in replacement for Cisco DWDM‑SFP‑4135‑100. Calibrated to 1541.35nm on the 100GHz ITU‑T grid, this 1.25G fiber transceiver delivers stable error‑free transmission up to 100km over G.652.D single‑mode fiber. It is a practical procurement choice for network operators, system integrators and enterprise buyers for DWDM channel expansion and legacy hardware refresh.
This carrier‑grade fiber transceiver adopts TEC temperature‑controlled DFB laser and high‑gain APD receiver, maintaining tight wavelength tolerance and low crosstalk within dense DWDM systems. Power consumption stays under 2W to reduce thermal load and operational costs. Pre‑loaded EEPROM enables alarm‑free hot‑swap deployment. Built‑in DDM supports real‑time operational diagnostics. Every fiber transceiver completes calibration and aging testing before shipment, supporting sample evaluation and high‑volume order fulfillment for global buyers.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-4214-100 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1542.14nm Max  Distance 100KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type APD
TX Power 0~+5dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤2W Receiver Overload -3.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 10–15 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -3 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a APD receiver (sensitivity ~ -32dBm,32 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
This C44 DWDM transceiver module runs with zero alarms and full firmware adaptation on the following Cisco hardware platforms:
  • Cisco Catalyst 2960 / 3560 / 3750 / 3850 / 9200 / 9300 Series Switches
  • Cisco ISR 1900 / 2900 / 3900 Series Integrated Service Routers
  • Cisco ASR 1000 Series Aggregation Service Routers
  • Cisco ONS 15454 / 15310 Optical Transport Platforms
  • Cisco ME 3400 / 3600 / 3800 Metro Ethernet Switches

2. Multi-Brand Cross Compatibility

This DWDM transceiver module complies with MSA standards and passes full interoperability tests. It runs stably on mainstream multi-brand network devices with no packet loss or link flapping.
  • Huawei AR / CE / S Series Switches & Routers
  • H3C S / ER / MSR Series Network Devices
  • Juniper EX / MX Series Routing & Switching Platforms
  • ZTE, MikroTik, TP-Link Enterprise-Grade Network Equipment

3. Free Value-Added Services

We offer exclusive free value-added services for all C44 DWDM transceiver modules to reduce your project deployment and maintenance costs.
  • Free custom EEPROM programming for special and legacy network environments
  • Lifelong free firmware refitting and version upgrade
  • Free pre-sales link budget calculation and loss evaluation
  • Free batch testing report and product qualification documents

Primary Application Scenarios

  • 100km long-haul metro DWDM network construction and fiber capacity expansion
  • Telecom base station backhaul and long-distance gigabit optical transmission
  • Cross-city private network interconnection for enterprises and operators
  • Multi-service signal aggregation with 100GHz DWDM MUX/DEMUX devices
  • Smart city and industrial long-distance optical link deployment
  • Existing DWDM network wavelength expansion and old module replacement

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Pair this DWDM transceiver module with 100GHz MUX/DEMUX to aggregate multiple services on one fiber pair. It saves fiber resources and simplifies wiring for metro DWDM deployment.

HYTOPTODEVICE DWDM fiber connectivity solution, multi‑service network aggregation solution

2. 100km Long-Haul DWDM Solution

Match the transceiver module with EDFA amplifiers to compensate fiber attenuation, stabilize optical signals and eliminate long-distance distortion, ensuring reliable 100km backbone transmission.

HYTOPTODEVICE long haul optical transmission solution, EDFA amplified DWDM network deployment


The Core Feature

1. Low-Power Data Center Efficient Connectivity

This DWDM transceiver module consumes less than 2W power, reducing equipment heat and energy loss. It supports stable, energy-efficient long-distance interconnection for data centers and metro backbone networks.

HYTOPTODEVICE low power DWDM transceiver module, energy efficient data center network connectivity


2.
Verified Host Interoperability for Cisco Devices

Pre-programmed firmware ensures full multi-brand compatibility. Hot-swap plug-and-play design realizes zero-alarm and zero-configuration deployment without link conflicts.
HYTOPTODEVICE multi‑brand compatible optical transceiver, fully verified network host interoperability

3.Rigorous Testing, Uncompromising Reliability

Every transceiver module undergoes strict factory calibration, wavelength inspection, crosstalk test and 72-hour aging screening. Rigorous testing guarantees stable batch performance for bulk projects.

HYTOPTODEVICE full tested carrier grade transceiver module, high stability long haul optical equipment


FAQ

Q1: Do you support custom coding for niche or specialized equipment?
A: As HYTOPTODEVICE, we deliver flexible EEPROM custom coding services for niche and specialized network hardware. Our engineering team can adjust module firmware to match lesser‑known host devices, helping buyers avoid compatibility headaches during project deployment. Custom re‑coding supports both small‑batch sample orders and large‑volume project procurement.

Q2: Are your products fully compliant with Multi‑Source Agreements (MSA)?
A: All our DWDM SFP fiber transceiver products strictly follow MSA multi‑source agreement specifications. Compliance guarantees mechanical dimensions, pin assignments and optical performance interoperability, so system integrators can confidently deploy these modules within multi‑vendor DWDM network environments.

Q3: How do I verify signal quality after installation?
A: After finishing field installation of this DWDM fiber transceiver, you can validate link signal quality via switch‑side DDM readouts, optical power meter testing and live traffic throughput checks. This practical verification workflow helps enterprise procurement teams confirm stable long‑haul transmission before formal project acceptance.

Q4: Can high Tx power damage the transmitter if left disconnected?
A: For this 100GHz 1.25G DWDM fiber transceiver, leaving the transmitter running while fiber remains disconnected will not burn out the laser instantly. Nevertheless, continuous open‑beam operation is not recommended for long‑term running, which may accelerate component aging and shorten service life for bulk‑purchased modules.

Q5: What happens if a transceiver exceeds its maximum operating temperature?
A: When this DWDM SFP transceiver runs beyond its rated maximum operating temperature, wavelength drift will first occur and cause fluctuating link performance. Severe over‑temperature triggers link drop‑offs. HYTOPTODEVICE factory testing simulates thermal stress conditions, helping customers reduce on‑site failure risks for metro backbone deployments.

Q6: Are your products resistant to dust, humidity, and static electricity (ESD)?
A: Our DWDM fiber transceivers go through standardized factory environmental tests for anti‑static, humidity and dust resistance. Even so, proper ESD protection procedures remain required during rack‑mount deployment. These hardened characteristics make our modules ideal for integrators building DWDM links inside non‑climate‑perfect equipment rooms.

Q7: How accurate are the real‑time DDM optical power readings?
A: The built‑in DDM function on our compatible DWDM SFP module delivers calibrated real‑time optical power readings with acceptable industry‑standard tolerance. Network technicians can rely on these readings for routine on‑site link monitoring, without extra expensive test instruments for daily network maintenance tasks.

Q8: Is hot‑swapping safe for both the module and the host switch?
A: This MSA‑compliant DWDM fiber transceiver supports standard hot‑swap operation for compatible host switches. Proper hot‑swap capability simplifies on‑site hardware replacement, which is a huge benefit for operators maintaining live metro DWDM networks without full‑rack power shutdown.

Q9: How do I safely eject a transceiver without damaging the port?
A: To safely eject this DWDM SFP transceiver and preserve switch port integrity, always use the integrated pull tab following official operation steps, avoid brute force pulling. Correct ejection habits lower hardware repair costs for enterprise clients managing large‑scale transceiver inventories.

Q10: How often should fiber connectors and transceiver ports be cleaned?
A: For long‑haul 80‑100km DWDM transmission scenarios, regular cleaning cycles for fiber connectors and transceiver ports are advised. Planned cleaning schedules reduce unexpected link outages, a key maintenance tip for system integrators running multi‑wavelength DWDM multiplexing projects.

Q11: Why is optical connector end‑face cleanliness so critical?
A: Dirty optical connector end‑faces introduce extra insertion loss for DWDM links. Even tiny contaminants can degrade signal performance over 100‑kilometer transmission distances. This factor deserves close attention for procurement teams responsible for stable DWDM backbone link performance.

Q12: Can dust caps be left off unused transceivers in active racks?
A: Leaving dust caps removed on idle transceivers inside active equipment racks is strongly discouraged. Exposed ports easily collect airborne dust, which leads to future unstable DWDM links. Keeping dust caps installed protects your purchased transceiver investment for long‑term standby usage.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • Cisco C30 DWDM‑SFP‑5333‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1553.33nm 100km 100GHz | HYTOPTODEVICE
  • HYTOPTODEVICE hot pluggable DWDM SFP transceiver module, gigabit network upgrade optical module
  • HYTOPTODEVICE high sensitivity APD DWDM transceiver module, carrier grade long haul optical transceiver
  • HYTOPTODEVICE bulk supply DWDM transceiver module, DDM monitoring gigabit telecom optical module
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download