• Cisco C30 DWDM‑SFP‑5333‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1553.33nm 100km 100GHz | HYTOPTODEVICE
  • HYTOPTODEVICE hot pluggable DWDM SFP transceiver module, gigabit network upgrade optical module
  • HYTOPTODEVICE high sensitivity APD DWDM transceiver module, carrier grade long haul optical transceiver
  • HYTOPTODEVICE bulk supply DWDM transceiver module, DDM monitoring gigabit telecom optical module
  • Cisco C30 DWDM‑SFP‑5333‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1553.33nm 100km 100GHz | HYTOPTODEVICE
  • HYTOPTODEVICE hot pluggable DWDM SFP transceiver module, gigabit network upgrade optical module
  • HYTOPTODEVICE high sensitivity APD DWDM transceiver module, carrier grade long haul optical transceiver
  • HYTOPTODEVICE bulk supply DWDM transceiver module, DDM monitoring gigabit telecom optical module

Cisco C40 DWDM‑SFP‑4532‑100 Compatible 1.25G DWDM Fiber Transceiver | 1000BASE-DWDM 1545.32nm 100km 100GHz | HYTOPTODEVICE

Shop reliable Cisco C40 compatible 1.25G DWDM fiber transceiver at HYTOPTODEVICE. 1545.32nm ITU‑T 100GHz grid, 100km single‑mode reach, APD high‑sensitivity receiver. Buy bulk DWDM SFP modules for metro backbone, project deployment and direct replacement of original Cisco hardware. 
CHANEL Cisco Compatible P/N  CHANEL Cisco Compatible P/N
CH30 DWDM‑SFP‑5333‑100 CH46 DWDM‑SFP‑4056‑100
CH31 DWDM‑SFP‑5252‑100 CH47 DWDM‑SFP‑3977‑100
CH32 DWDM‑SFP‑5172‑100 CH48 DWDM‑SFP‑3898‑100
CH33 DWDM‑SFP‑5092‑100 CH49 DWDM‑SFP‑3819‑100
CH34 DWDM‑SFP‑5012‑100 CH50 DWDM‑SFP‑3740‑100
CH35 DWDM‑SFP‑4932‑100 CH51 DWDM‑SFP‑3661‑100
CH36 DWDM‑SFP‑4851‑100 CH52 DWDM‑SFP‑3582‑100
CH37 DWDM‑SFP‑4772‑100 CH53 DWDM‑SFP‑3504‑100
CH38 DWDM‑SFP‑4692‑100 CH54 DWDM‑SFP‑3425‑100
CH39 DWDM‑SFP‑4612‑100 CH55 DWDM‑SFP‑3347‑100
CH40 DWDM‑SFP‑4532‑100 CH56 DWDM‑SFP‑3268‑100
CH41 DWDM‑SFP‑4453‑100 CH57 DWDM‑SFP‑3190‑100
CH42 DWDM‑SFP‑4373‑100 CH58 DWDM‑SFP‑3112‑100
CH43 DWDM‑SFP‑4294‑100 CH59 DWDM‑SFP‑3033‑100
CH44 DWDM‑SFP‑4214‑100 CH60 DWDM‑SFP‑2955‑100
CH45 DWDM‑SFP‑4135‑100 CH61 DWDM‑SFP‑2877‑100
Description

Cisco C40 DWDM‑SFP‑4532‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1545.32nm 100km 100GHz | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE C40 DWDM SFP fiber transceiver serves as drop‑in replacement for Cisco DWDM‑SFP‑4532‑100. Tuned to 1545.32nm on 100GHz ITU‑T grid, this 1.25G fiber transceiver delivers stable error‑free transmission up to 100km over G.652.D single‑mode fiber. It is a practical purchasing option for network operators, system integrators and enterprise buyers for DWDM wavelength expansion and legacy hardware refresh.
This carrier‑grade fiber transceiver integrates TEC temperature‑controlled DFB laser and high‑gain APD receiver, maintaining tight wavelength tolerance and low crosstalk within dense wavelength multiplexing environments. Power consumption stays under 2W to lower running heat and power expenditure. Pre‑programmed EEPROM enables alarm‑free hot‑swap insertion. Built‑in DDM offers real‑time operational monitoring. Every fiber transceiver completes calibration and aging test before shipment, supporting sample testing and large‑volume order fulfillment for global buyers.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-4532-100 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1545.32nm Max  Distance 100KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type APD
TX Power 0~+5dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤2W Receiver Overload -3.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 10–15 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -3 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a APD receiver (sensitivity ~ -32dBm,32 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
This C40 DWDM transceiver module runs with zero alarms and full firmware adaptation on the following Cisco hardware platforms:
  • Cisco Catalyst 2960 / 3560 / 3750 / 3850 / 9200 / 9300 Series Switches
  • Cisco ISR 1900 / 2900 / 3900 Series Integrated Service Routers
  • Cisco ASR 1000 Series Aggregation Service Routers
  • Cisco ONS 15454 / 15310 Optical Transport Platforms
  • Cisco ME 3400 / 3600 / 3800 Metro Ethernet Switches

2. Multi-Brand Cross Compatibility

This DWDM transceiver module complies with MSA standards and passes full interoperability tests. It runs stably on mainstream multi-brand network devices with no packet loss or link flapping.
  • Huawei AR / CE / S Series Switches & Routers
  • H3C S / ER / MSR Series Network Devices
  • Juniper EX / MX Series Routing & Switching Platforms
  • ZTE, MikroTik, TP-Link Enterprise-Grade Network Equipment

3. Free Value-Added Services

We offer exclusive free value-added services for all C40 DWDM transceiver modules to reduce your project deployment and maintenance costs.
  • Free custom EEPROM programming for special and legacy network environments
  • Lifelong free firmware refitting and version upgrade
  • Free pre-sales link budget calculation and loss evaluation
  • Free batch testing report and product qualification documents

Primary Application Scenarios

  • 100km long-haul metro DWDM network construction and fiber capacity expansion
  • Telecom base station backhaul and long-distance gigabit optical transmission
  • Cross-city private network interconnection for enterprises and operators
  • Multi-service signal aggregation with 100GHz DWDM MUX/DEMUX devices
  • Smart city and industrial long-distance optical link deployment
  • Existing DWDM network wavelength expansion and old module replacement

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Pair this DWDM transceiver module with 100GHz MUX/DEMUX to aggregate multiple services on one fiber pair. It saves fiber resources and simplifies wiring for metro DWDM deployment.

HYTOPTODEVICE DWDM fiber connectivity solution, multi‑service network aggregation solution

2. 100km Long-Haul DWDM Solution

Match the transceiver module with EDFA amplifiers to compensate fiber attenuation, stabilize optical signals and eliminate long-distance distortion, ensuring reliable 100km backbone transmission.

HYTOPTODEVICE long haul optical transmission solution, EDFA amplified DWDM network deployment


The Core Feature

1. Low-Power Data Center Efficient Connectivity

This DWDM transceiver module consumes less than 2W power, reducing equipment heat and energy loss. It supports stable, energy-efficient long-distance interconnection for data centers and metro backbone networks.

HYTOPTODEVICE low power DWDM transceiver module, energy efficient data center network connectivity


2.
Verified Host Interoperability for Cisco Devices

Pre-programmed firmware ensures full multi-brand compatibility. Hot-swap plug-and-play design realizes zero-alarm and zero-configuration deployment without link conflicts.
HYTOPTODEVICE multi‑brand compatible optical transceiver, fully verified network host interoperability

3.Rigorous Testing, Uncompromising Reliability

Every transceiver module undergoes strict factory calibration, wavelength inspection, crosstalk test and 72-hour aging screening. Rigorous testing guarantees stable batch performance for bulk projects.

HYTOPTODEVICE full tested carrier grade transceiver module, high stability long haul optical equipment


FAQ
Q1: Can this C40 fiber transceiver run on older Cisco and legacy network gear?
A: Yes. Tuned EEPROM delivers good compatibility for most legacy devices. We can customize firmware for extra‑old hardware upon purchase request.

Q2: Am I able to re‑program the fiber transceiver if I upgrade my network devices later?
A: Absolutely. Free EEPROM re‑flashing service removes vendor lock constraints. Our 24‑hour engineering support handles re‑coding for purchased units.

Q3: Should I pick UPC or APC connector for DWDM long‑haul fiber transceiver links?
A: UPC is standard for 1000BASE‑DWDM fiber transceiver deployment. APC mainly applies to PON systems. Avoid mixing connector polish types to prevent unexpected signal loss.

Q4: What is the minimum fiber span without using an optical attenuator for this fiber transceiver?
A: 10‑15km G.652.D fiber is recommended minimum span. This prevents APD receiver saturation caused by ultra‑short direct fiber connection.

Q5: How to resolve over‑high received optical power issue after installing this fiber transceiver?
A: Fit a fixed‑value optical attenuator at receive side to bring power back to normal working range and protect APD receiver components.

Q6: Does this DWDM fiber transceiver include built‑in surge and static protection?
A: Yes. Integrated overcurrent, overvoltage and ESD protection safeguards internal laser and receiver chips against equipment room power spikes.

Q7: Why does temperature management matter for DWDM fiber transceiver wavelength stability?
A: On‑board TEC circuit locks laser wavelength tightly to 100GHz ITU‑T grid. Proper thermal control avoids wavelength drift and adjacent‑channel crosstalk.

Q8: Can DDM function give early warning before fiber transceiver link failure occurs?
A: Yes. Real‑time tracking of optical power, temperature and supply voltage generates threshold alerts, supporting preventive maintenance before service outage.

Q9: How are fiber transceiver units protected during shipping for bulk orders?
A: Every fiber transceiver is fitted with dust cap, packed individually inside anti‑static bag and shock‑resistant tray to protect optical end‑face in transit.

Q10: What supporting documents can I get when I buy this fiber transceiver for bidding projects?
A: Standard datasheet comes with every order. Bulk procurement customers can obtain batch test reports and compliance certificates for project acceptance.

Q11: Do you offer technical troubleshooting support after purchasing fiber transceiver units?
A: 24‑hour engineering support is available. We assist with link debugging, compatibility tuning and deployment optimization for purchased fiber transceiver hardware.

Q12: Can I order sample fiber transceiver for pre‑purchase lab testing?
A: Samples are available for evaluation before formal bulk procurement. Test performance in lab or field environment to confirm fit for your network.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • Cisco C30 DWDM‑SFP‑5333‑100 Compatible 1.25G DWDM Transceiver Module | 1000BASE-DWDM 1553.33nm 100km 100GHz | HYTOPTODEVICE
  • HYTOPTODEVICE hot pluggable DWDM SFP transceiver module, gigabit network upgrade optical module
  • HYTOPTODEVICE high sensitivity APD DWDM transceiver module, carrier grade long haul optical transceiver
  • HYTOPTODEVICE bulk supply DWDM transceiver module, DDM monitoring gigabit telecom optical module
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download