| CH | P/N | CH | P/N |
| C17 | DWDM‑SFP‑6386‑80 | C27 | DWDM‑SFP‑5575‑80 |
| C18 | DWDM‑SFP‑6305‑80 | C28 | DWDM‑SFP‑5494‑80 |
| C19 | DWDM‑SFP‑6223‑80 | C29 | DWDM‑SFP‑5413‑80 |
| C20 | DWDM‑SFP‑6142‑80 | C30 | DWDM‑SFP‑5333‑80 |
| C21 | DWDM‑SFP‑6061‑80 | C31 | DWDM‑SFP‑5252‑80 |
| C22 | DWDM‑SFP‑5979‑80 | C32 | DWDM‑SFP‑5172‑80 |
| C23 | DWDM‑SFP‑5898‑80 | C33 | DWDM‑SFP‑5092‑80 |
| C24 | DWDM‑SFP‑5817‑80 | C34 | DWDM‑SFP‑5012‑80 |
| C25 | DWDM‑SFP‑5736‑80 | C35 | DWDM‑SFP‑4932‑80 |
| C26 | DWDM‑SFP‑5655‑80 | C36 | DWDM‑SFP‑4851‑80 |
| Cisco Compatible | DWDM-SFP-5012-80 | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Max Data Rate | 1.25Gbps |
| Wavelength | 1550.12nm | Max Distance | 80KM |
| Connector | Duplex LC | Transmitter Type | DWDM DFB (Cooled) |
| Cable Type | SMF | Receiver Type | PIN |
| TX Power | 0~+5dBm | Receiver Sensitivity | < -26.0dBm |
| Power Consumption | ≤2W | Receiver Overload | -3.0dBm |
| Protocols | SFP MSA, SFF-8472 | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.
Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 10–15 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -3 dBm and prevent receiver burnout.
Architecture: Built with a Cooled DFB (TEC) transmitter and a PIN receiver (sensitivity ~ -24 dBm, 24 dB link budget).
Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.
Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.
