• hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Cisco C33 DWDM‑SFP‑5092‑80 Compatible 1.25G DWDM SFP Transceiver Module | 1000BASE-DWDM 1550.92nm 80km 100GHz | HYTOPTODEVICE

Cost-effective Cisco DWDM‑SFP‑5092‑80 replacement transceiver, 100GHz ITU-T 1550.92nm, 80km single-mode fiber, TEC DFB laser, full DDM diagnostics, zero-alarm plug-and-play for Cisco switches, ideal telecom metro DWDM & cell tower backhaul fiber links.
CH P/N CH P/N
C17 DWDM‑SFP‑6386‑80 C27 DWDM‑SFP‑5575‑80
C18 DWDM‑SFP‑6305‑80 C28 DWDM‑SFP‑5494‑80
C19 DWDM‑SFP‑6223‑80 C29 DWDM‑SFP‑5413‑80
C20 DWDM‑SFP‑6142‑80 C30 DWDM‑SFP‑5333‑80
C21 DWDM‑SFP‑6061‑80 C31 DWDM‑SFP‑5252‑80
C22 DWDM‑SFP‑5979‑80 C32 DWDM‑SFP‑5172‑80
C23 DWDM‑SFP‑5898‑80 C33 DWDM‑SFP‑5092‑80
C24 DWDM‑SFP‑5817‑80 C34 DWDM‑SFP‑5012‑80
C25 DWDM‑SFP‑5736‑80  C35 DWDM‑SFP‑4932‑80
C26 DWDM‑SFP‑5655‑80  C36 DWDM‑SFP‑4851‑80
Description

Cisco C33 DWDM‑SFP‑5092‑80 Compatible 1.25G DWDM SFP Transceiver Module | 1000BASE‑DWDM 1550.92nm 80km Bulk Wholesale

Product Overview

HYTOPTODEVICE C33 DWDM SFP is direct pin-to-pin drop-in replacement for Cisco DWDM‑SFP‑5092‑80, built on standard 100GHz ITU-T C-band grid at 1550.92nm wavelength, delivering stable error-free 80km transmission over G.652.D single-mode fiber for dense wavelength multiplex systems.
Equipped with industrial TEC cooled DFB laser and PIN receiver to cut inter-channel crosstalk, power consumption controlled below 2W for 24/7 continuous operation. Preloaded Cisco EEPROM eliminates unsupported transceiver alerts, with hot-swap design and SFF-8472 compliant DDM real-time diagnostics for metro optical rings and remote cell backhaul.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-5092-80 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1550.92nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type PIN
TX Power 0~+5dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤2W Receiver Overload -3.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 10–15 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -3 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a PIN receiver (sensitivity ~ -24 dBm, 24 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Custom Cisco‑specific EEPROM signature eliminates alarms and port lockdown. No extra configuration or firmware upgrade is required for plug‑and‑play deployment across supported Cisco enterprise and carrier‑grade hardware.

Fully Compatible Cisco Platforms:
  • Cisco Catalyst 3850, 9200, 9300 Series enterprise switches
  • Cisco ISR 4000‑series multi‑service branch routers
  • Cisco ASR 1000‑series carrier backbone routers
  • Cisco ONS optical transport platforms supporting 100GHz DWDM SFP
  • All Cisco devices accepting original DWDM‑SFP‑5092‑80 transceivers

2. Multi-Brand Cross Compatibility

Compliant with universal SFP MSA specifications, this C33 DWDM SFP runs error‑free on Huawei, H3C, Juniper, MikroTik and other mainstream network hardware. Custom firmware adaptation is available for complex multi‑vendor DWDM environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

  • Metro DWDM Ring Networking: Standard C33 100GHz wavelength supports single-fiber multiplexing. It saves fiber resources for carrier metro backbone deployment and network expansion.
  • ISP Base Station Backhaul: Supports 80km passive long-distance transmission. It eliminates extra amplification equipment and cuts ISP operation costs.
  • Enterprise Cross-Branch Connection: Builds stable low-cost private optical links. It supports cross-region data synchronization and video conference transmission.
  • MAN Access Aggregation: Provides independent wavelength service isolation. It effectively avoids network congestion and improves MAN operation stability.
  • Industrial & IoT Transmission: Features excellent anti-interference capability. It guarantees stable 80km signal transmission for industrial and smart city monitoring.
  • Legacy Network Upgrade: Supplements exclusive C-band DWDM channels. It enables low-cost multi-service multiplexing and bandwidth expansion for old fiber networks.

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Matches standard DWDM MUX/DEMUX devices, utilizing independent C33 1550.92nm wavelength for single-fiber multi-service multiplexing. It simplifies wiring and delivers stable gigabit transmission for medium and short-distance networking.



2. 80km Long-Haul DWDM Solution

Integrates EDFA amplification, DWDM multiplexing and managed chassis design. It compensates long-span fiber loss, stabilizes C33 wavelength signal, and adapts to carrier metro backhaul and ultra-long cross-regional transmission.


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Ultra-low power design reduces power consumption and heat generation. The optimized single-fiber structure simplifies data center cabling, enabling cost-effective and stable gigabit Ethernet transmission.

1G Data Center Connectivity low power single-fiber Gigabit Ethernet DWDM SFP solution


2.
Verified Host Interoperability for Cisco Devices

Calibrated firmware supports zero-alarm plug-and-play for Huawei, Cisco and other mainstream devices. It solves multi-brand compatibility problems and adapts to hybrid network deployment.
Verified multi-vendor interoperability for  Cisco  DWDM SFP transceiver

3.Rigorous Testing, Uncompromising Reliability

Integrating precise wavelength locking, stable 80km long-haul transmission and multi-scenario adaptability, this module forms a complete gigabit DWDM solution. It fully meets diversified networking demands for carrier metro backhaul and enterprise long-distance interconnection.

Comprehensive 1.25G 80km C17 DWDM networking solution for carrier and enterprise deployment


FAQ
Q1: How do I verify HYTOPTODEVICE C33 1550.92nm DWDM SFP works with my switches or servers?
A: This 1.25G 100GHz C33 module runs alarm-free on Cisco hardware and meets global SFP MSA standards. Cross-check your device transceiver list against 1.25G speed, 1550.92nm wavelength and 80km transmission range. Compatibility video available upon request.

Q2: How to resolve Unsupported Transceiver alert on Cisco network devices?
A: Our exclusive Cisco-tailored firmware rarely triggers compatibility warnings. Update device firmware first then enable third-party transceiver permission. We provide custom EEPROM vendor-code flashing to bypass proprietary vendor locks, free re-coding service for all clients. Reach us 24h for timely technical replies.

Q3: Can this C33 DWDM module be reflashed to fit new different-brand network hardware?
A: Built-in EEPROM supports full vendor firmware reprogramming. Re-coding can be done easily via portable field-coding tools or engineering assistance, and we provide this service. Contact support 24/7, we deliver targeted technical solution within one working day to cut network upgrade cost.

Q4: Are all HYTOPTODEVICE DWDM transceivers compliant with SFP MSA & SFF-8472 industry standards?
A: Every HYTOPTO fiber optic module strictly follows official MSA specs. Unified mechanical size, pin layout and DDM diagnostic functions guarantee universal interoperability with all standard-compliant network equipment.

Q5: Will this 80km C33 transceiver reach full rated distance under real field fiber conditions?
A: The 80km rating is validated on standard G.652.D fiber with nominal loss values. Extra splices, excessive connectors or aged cabling will slightly shorten maximum working transmission distance.

Q6: How does the C33 module handle slow optical attenuation caused by long-term fiber aging?
A: This carrier-grade DWDM transceiver carries sufficient built-in power margin to resist mild fiber aging signal loss without packet loss or link drops. Severe degradation solved by cleaning fiber connectors or installing EDFA amplifiers.

Q7: What methods can check signal quality after C33 module installation?
A: Use native device DDM diagnostics to view real-time TX/RX optical power. Combine port link status, packet loss and BER metrics; steady power levels and zero packet loss confirm stable long-term transmission.

Q8: Why install a 10-15dBm fixed attenuator during short-distance lab testing of this 80km DWDM SFP?
A: The 80km-rated TEC laser outputs high optical power. For testing links shorter than 15km, a 10-15dBm attenuator is mandatory to avoid receiver saturation, bit errors and permanent port burnout during lab debugging.

Q9: How to fix issues when received optical power exceeds hardware acceptable threshold limits?
A: Excess incoming optical power destabilizes fiber links and generates data errors. Install matching DWDM fixed attenuator to adjust power to standard operating window, recheck DDM readings for consistent stable transmission.

Q10: Is this commercial-grade C33 module suitable for outdoor or extreme industrial temperature environments?
A: This transceiver operates reliably 0°C–70°C for indoor data racks. Choose our wide-temperature industrial DWDM transceivers for exposed outdoor and harsh factory locations.

Q11: Does HYTOPTODEVICE Cisco compatible C33 DWDM support DDM / DOM digital diagnostic monitoring?
A: Yes, this C33 1550.92nm module fully complies with SFF-8472 standards to deliver real-time DDM data: transmit power, receive power, internal temperature and supply voltage for proactive link maintenance & fault prediction.

Q12: How accurate are DDM optical power readings from this long-haul DWDM transceiver?
A: High-precision internal monitoring chips deliver power measurement accuracy within ±1dB, meeting global industry tolerance standards. Readings are reliable for daily network monitoring and field fault troubleshooting.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download