• hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Cisco C31 DWDM‑SFP‑5252‑80 Compatible 1.25G DWDM SFP Optical Transceiver | 1000BASE-DWDM 1552.52nm 80km 100GHz | HYTOPTODEVICE

Cost-effective Cisco DWDM‑SFP‑5252‑80 replacement module, 100GHz 1552.52nm, 80km single-mode, TEC DFB laser, DDM, zero-alarm plug-and-play for Cisco switches, ideal telecom metro DWDM fiber links.
CH P/N CH P/N
C17 DWDM‑SFP‑6386‑80 C27 DWDM‑SFP‑5575‑80
C18 DWDM‑SFP‑6305‑80 C28 DWDM‑SFP‑5494‑80
C19 DWDM‑SFP‑6223‑80 C29 DWDM‑SFP‑5413‑80
C20 DWDM‑SFP‑6142‑80 C30 DWDM‑SFP‑5333‑80
C21 DWDM‑SFP‑6061‑80 C31 DWDM‑SFP‑5252‑80
C22 DWDM‑SFP‑5979‑80 C32 DWDM‑SFP‑5172‑80
C23 DWDM‑SFP‑5898‑80 C33 DWDM‑SFP‑5092‑80
C24 DWDM‑SFP‑5817‑80 C34 DWDM‑SFP‑5012‑80
C25 DWDM‑SFP‑5736‑80  C35 DWDM‑SFP‑4932‑80
C26 DWDM‑SFP‑5655‑80  C36 DWDM‑SFP‑4851‑80
Description

Cisco C31 DWDM‑SFP‑5252‑80 Compatible 1.25G DWDM SFP Optical Transceiver | 1000BASE‑DWDM 1552.52nm 80km Bulk Wholesale

Product Overview

HYTOPTODEVICE C31 SFP is direct drop-in replacement for Cisco DWDM‑SFP‑5252‑80, 100GHz ITU-T 1552.52nm, stable 80km G.652.D single-mode transmission. TEC cooled DFB cuts channel crosstalk, power under 2W. Preloaded Cisco EEPROM avoids unsupported transceiver errors, hot-swap + SFF-8472 DDM for metro rings and cell tower backhaul.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-5252-80 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1552.52nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type PIN
TX Power 0~+5dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤2W Receiver Overload -3.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 10–15 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -3 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a PIN receiver (sensitivity ~ -24 dBm, 24 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Custom Cisco‑specific EEPROM signature eliminates alarms and port lockdown. No extra configuration or firmware upgrade is required for plug‑and‑play deployment across supported Cisco enterprise and carrier‑grade hardware.

Fully Compatible Cisco Platforms:
  • Cisco Catalyst 3850, 9200, 9300 Series enterprise switches
  • Cisco ISR 4000‑series multi‑service branch routers
  • Cisco ASR 1000‑series carrier backbone routers
  • Cisco ONS optical transport platforms supporting 100GHz DWDM SFP
  • All Cisco devices accepting original DWDM‑SFP‑5252‑80 transceivers

2. Multi-Brand Cross Compatibility

Compliant with universal SFP MSA specifications, this C31 DWDM SFP runs error‑free on Huawei, H3C, Juniper, MikroTik and other mainstream network hardware. Custom firmware adaptation is available for complex multi‑vendor DWDM environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

  • Metro DWDM Ring Networking: Standard C31 100GHz wavelength supports single-fiber multiplexing. It saves fiber resources for carrier metro backbone deployment and network expansion.
  • ISP Base Station Backhaul: Supports 80km passive long-distance transmission. It eliminates extra amplification equipment and cuts ISP operation costs.
  • Enterprise Cross-Branch Connection: Builds stable low-cost private optical links. It supports cross-region data synchronization and video conference transmission.
  • MAN Access Aggregation: Provides independent wavelength service isolation. It effectively avoids network congestion and improves MAN operation stability.
  • Industrial & IoT Transmission: Features excellent anti-interference capability. It guarantees stable 80km signal transmission for industrial and smart city monitoring.
  • Legacy Network Upgrade: Supplements exclusive C-band DWDM channels. It enables low-cost multi-service multiplexing and bandwidth expansion for old fiber networks.

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Matches standard DWDM MUX/DEMUX devices, utilizing independent C31 1552.52nm wavelength for single-fiber multi-service multiplexing. It simplifies wiring and delivers stable gigabit transmission for medium and short-distance networking.



2. 80km Long-Haul DWDM Solution

Integrates EDFA amplification, DWDM multiplexing and managed chassis design. It compensates long-span fiber loss, stabilizes C31 wavelength signal, and adapts to carrier metro backhaul and ultra-long cross-regional transmission.


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Ultra-low power design reduces power consumption and heat generation. The optimized single-fiber structure simplifies data center cabling, enabling cost-effective and stable gigabit Ethernet transmission.

1G Data Center Connectivity low power single-fiber Gigabit Ethernet DWDM SFP solution


2.
Verified Host Interoperability for Cisco Devices

Calibrated firmware supports zero-alarm plug-and-play for Huawei, Cisco and other mainstream devices. It solves multi-brand compatibility problems and adapts to hybrid network deployment.
Verified multi-vendor interoperability for  Cisco  DWDM SFP transceiver

3.Rigorous Testing, Uncompromising Reliability

Integrating precise wavelength locking, stable 80km long-haul transmission and multi-scenario adaptability, this module forms a complete gigabit DWDM solution. It fully meets diversified networking demands for carrier metro backhaul and enterprise long-distance interconnection.

Comprehensive 1.25G 80km C17 DWDM networking solution for carrier and enterprise deployment


FAQ

Q1: How to verify HYTOPTODEVICE C31 DWDM SFP fits my switches or servers?
A: This 1.25G 100GHz C31 module works alarm-free on Cisco and meets SFP MSA standards. Cross-check 1552.52nm, 80km and 1.25G specs with your hardware compatibility sheet. Compatibility video available upon request.

Q2: How to resolve Unsupported Transceiver warning on Cisco gear?
A: Our exclusive Cisco firmware rarely triggers alerts. Update device firmware then enable third-party transceiver permission. We provide custom EEPROM vendor-code flashing to bypass proprietary vendor locks, free re-coding service included. Reach us 24h for instant replies.

Q3: Can I re-code this C31 module for new network hardware later?
A: EEPROM supports full vendor reprogramming. Re-coding can be done easily via portable field-coding tools or engineering assistance, and we provide this service. Contact support 24/7, we deliver full solution within one working day.

Q4: Are these DWDM transceivers SFP MSA & SFF-8472 compliant?
A: All HYTOPTO DWDM modules strictly follow official MSA specs for uniform size, pinout and DDM functions to guarantee universal interoperability.

Q5: Will this C31 80km module hit full rated distance in real field deployment?
A: 80km rating tested on standard lossless G.652.D fiber. Extra splices, connectors or aged cable slightly shorten maximum reach.

Q6: How does the module handle slow power attenuation from fiber aging?
A: Built-in sufficient power margin avoids packet loss under mild long-term fiber loss. Severe attenuation fixed by cleaning connectors or adding EDFA amplifiers.

Q7: How to test real signal quality after installation?
A: Use built-in DDM to monitor TX/RX optical power, port status and BER. Steady power with zero packet loss confirms stable long-term transmission.

Q8: Why use 10-15dBm attenuator for short-distance lab testing?
A: High-power TEC laser on 80km modules causes receiver overload under 15km links. Install 10-15dBm fixed attenuator to avoid saturation, bit errors and port burnout.

Q9: Fix over-limit received optical power issues?
A: Excess input power destabilizes links. Install matching DWDM fixed attenuator, recheck DDM readings to maintain normal operating range.

Q10: Suitable for outdoor / industrial extreme temperature?
A: Commercial grade operates 0°C–70°C for indoor racks. Choose industrial wide-temperature DWDM modules for exposed outdoor & harsh factory environments.

Q11: Does C31 transceiver support DDM / DOM monitoring?
A: Fully SFF-8472 compliant DDM delivers remote real-time data: transmit power, receive power, internal temp and supply voltage for proactive maintenance.

Q12: How accurate are DDM optical power readings?
A: High-precision monitoring chip with ±1dB tolerance, reliable for daily network inspection and field fault troubleshooting.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download