• hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers

Cisco C24 DWDM‑SFP‑5817‑80 Compatible 1.25G DWDM SFP Transceiver | 1000BASE-DWDM 1558.17nm 80km 100GHz | HYTOPTODEVICE

HYTOPTODEVICE factory wholesale Cisco C24 DWDM-SFP-5817-80 compatible 1.25G DWDM SFP module. 100GHz ITU grid 1558.17nm wavelength, 80km single-mode long-haul transmission. Adopts Cooled DFB TEC laser and PIN receiver, low power below 2W. Zero-alarm plug-and-play for Cisco switches/routers, ideal for metro DWDM ring and wireless base station backhaul.
CH P/N CH P/N
C17 DWDM‑SFP‑6386‑80 C27 DWDM‑SFP‑5575‑80
C18 DWDM‑SFP‑6305‑80 C28 DWDM‑SFP‑5494‑80
C19 DWDM‑SFP‑6223‑80 C29 DWDM‑SFP‑5413‑80
C20 DWDM‑SFP‑6142‑80 C30 DWDM‑SFP‑5333‑80
C21 DWDM‑SFP‑6061‑80 C31 DWDM‑SFP‑5252‑80
C22 DWDM‑SFP‑5979‑80 C32 DWDM‑SFP‑5172‑80
C23 DWDM‑SFP‑5898‑80 C33 DWDM‑SFP‑5092‑80
C24 DWDM‑SFP‑5817‑80 C34 DWDM‑SFP‑5012‑80
C25 DWDM‑SFP‑5736‑80  C35 DWDM‑SFP‑4932‑80
C26 DWDM‑SFP‑5655‑80  C36 DWDM‑SFP‑4851‑80
Description

Cisco C24 DWDM‑SFP‑5817‑80 Compatible 1.25G DWDM SFP Transceiver | 1000BASE‑DWDM 1558.17nm 80km Bulk Wholesale

Product Overview

HYTOPTODEVICE 1.25G C24 DWDM SFP is fully pin-to-pin compatible with Cisco DWDM‑SFP‑5817‑80. It adopts standard 100GHz ITU-T grid and 1558.17nm fixed wavelength, supporting stable 80km long-distance transmission over G.652.D/OS2 single-mode fiber for dense DWDM multiplexing systems.
This module features industrial Cooled DFB (TEC) transmitter and PIN receiver, realizing precise active temperature wavelength locking. It effectively suppresses wavelength drift and adjacent channel crosstalk in compact 100GHz DWDM networks, with power consumption strictly controlled below 2W for reliable 24/7 full-load operation.
Pre-flashed dedicated EEPROM enables zero-alarm plug-and-play on Cisco switches and routers. It supports hot-swap installation and SFF-8472 DDM real-time monitoring, perfectly suited for carrier metro ring construction, remote base station backhaul and enterprise network bandwidth expansion.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-5817-80 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1558.17nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type PIN
TX Power 0~+5dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤2W Receiver Overload -3.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 10–15 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -3 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a PIN receiver (sensitivity ~ -24 dBm, 24 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Custom Cisco‑specific EEPROM signature eliminates alarms and port lockdown. No extra configuration or firmware upgrade is required for plug‑and‑play deployment across supported Cisco enterprise and carrier‑grade hardware.

Fully Compatible Cisco Platforms:
  • Cisco Catalyst 3850, 9200, 9300 Series enterprise switches
  • Cisco ISR 4000‑series multi‑service branch routers
  • Cisco ASR 1000‑series carrier backbone routers
  • Cisco ONS optical transport platforms supporting 100GHz DWDM SFP
  • All Cisco devices accepting original DWDM‑SFP‑5817‑80 transceivers

2. Multi-Brand Cross Compatibility

Compliant with universal SFP MSA specifications, this C24 DWDM SFP runs error‑free on Huawei, H3C, Juniper, MikroTik and other mainstream network hardware. Custom firmware adaptation is available for complex multi‑vendor DWDM environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

  • Metro DWDM Ring Networking: Standard C24 100GHz wavelength supports single-fiber multiplexing. It saves fiber resources for carrier metro backbone deployment and network expansion.
  • ISP Base Station Backhaul: Supports 80km passive long-distance transmission. It eliminates extra amplification equipment and cuts ISP operation costs.
  • Enterprise Cross-Branch Connection: Builds stable low-cost private optical links. It supports cross-region data synchronization and video conference transmission.
  • MAN Access Aggregation: Provides independent wavelength service isolation. It effectively avoids network congestion and improves MAN operation stability.
  • Industrial & IoT Transmission: Features excellent anti-interference capability. It guarantees stable 80km signal transmission for industrial and smart city monitoring.
  • Legacy Network Upgrade: Supplements exclusive C-band DWDM channels. It enables low-cost multi-service multiplexing and bandwidth expansion for old fiber networks.

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Matches standard DWDM MUX/DEMUX devices, utilizing independent C24 1558.17nm wavelength for single-fiber multi-service multiplexing. It simplifies wiring and delivers stable gigabit transmission for medium and short-distance networking.



2. 80km Long-Haul DWDM Solution

Integrates EDFA amplification, DWDM multiplexing and managed chassis design. It compensates long-span fiber loss, stabilizes C24 wavelength signal, and adapts to carrier metro backhaul and ultra-long cross-regional transmission.


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Ultra-low power design reduces power consumption and heat generation. The optimized single-fiber structure simplifies data center cabling, enabling cost-effective and stable gigabit Ethernet transmission.

1G Data Center Connectivity low power single-fiber Gigabit Ethernet DWDM SFP solution


2.
Verified Host Interoperability for Cisco Devices

Calibrated firmware supports zero-alarm plug-and-play for Huawei, Cisco and other mainstream devices. It solves multi-brand compatibility problems and adapts to hybrid network deployment.
Verified multi-vendor interoperability for  Cisco  DWDM SFP transceiver

3.Rigorous Testing, Uncompromising Reliability

Integrating precise wavelength locking, stable 80km long-haul transmission and multi-scenario adaptability, this module forms a complete gigabit DWDM solution. It fully meets diversified networking demands for carrier metro backhaul and enterprise long-distance interconnection.

Comprehensive 1.25G 80km C17 DWDM networking solution for carrier and enterprise deployment


FAQ

Q1: Do 80km DWDM modules need attenuators for short links?
A: Yes. High-power TEC laser causes excessive optical power on short-distance links, resulting in receiver saturation, bit errors and unstable network links.

Q2: What core components does this C24 module use?
A: It adopts Cooled DFB (TEC) transmitter and PIN receiver. Active temperature control achieves precise wavelength locking and avoids crosstalk in dense 100GHz DWDM systems.

Q3: Which fiber supports 80km stable transmission?
A: G.652.D/OS2 low-loss single-mode fiber is required to guarantee sufficient link budget and stable long-haul transmission performance.

Q4: Does it support multi-vendor hybrid networking?
A: Yes. This HYTOPTODEVICE module complies with SFP MSA standards, running alarm-free on Cisco, Huawei, H3C and other mainstream network devices.

Q5: What is the module power consumption?
A: Optimized hardware design ensures power consumption below 2W, supporting long-term stable full-load operation.

Q6: How does temperature affect 100GHz DWDM performance?
A: Laser wavelength drifts with temperature fluctuations. Built-in TEC system stabilizes wavelength effectively. Operating beyond 0°C–70°C will cause wavelength offset and higher bit error rate.

Q7: Can EDFA extend the transmission distance?
A: Yes. 1558.17nm falls in standard C-band. EDFA amplification is available with proper OSNR optimization to prevent signal degradation.

Q8: Does the module support real-time link monitoring?
A: Full SFF-8472 DDM monitoring is supported for real-time detection of optical power, temperature and voltage, enabling remote link maintenance and fault pre-warning.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • hytoptodevice 1.25g DWDM SFP TRANSCEIVER module 80km smf for cisco switch
  • hytoptodevice 1000BASE-DWDM fiber optical transceiver 80km smf
  • cisco compatible 1.25G 1000BASE-DWDM 80KM optical transceiver bulk supply
  • hytoptodevice 1.25G DWDM MUX/DEMUX multi-channel fiber aggregation solution for Dwdm transceivers
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download