| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-40G-SR4-S | |
| 2 | APRESIA | H-SR4-QSFP+ | |
| 3 | Alcatel-Lucent | QSFP-40G-SR | |
| 4 | Arista Networks | QSFP-40G-SR4 | |
| 5 | Brocade | 40G-QSFP-SR4-INT | |
| 6 | Check Point | CPAC-TR-40SR-SSM160-QSFP | |
| 7 | Cisco Meraki | MA-QSFP-40G-SR4 | |
| 8 | D-Link | DEM-QX01Q-SR4 |
| Check Point Compatible | CPAC-TR-40SR-SSM160-QSFP | Vendor Name | HYTOPTODEVICE |
| Form Factor | QSFP+ | Max Data Rate | 41.25Gbps |
| Wavelength | 850nm | Max Distance | 150m@OM4/100m@OM3 |
| Connector | MTP/MPO | Transmitter Type | VCSEL 850nm |
| Cable Type | MMF | Receiver Type | PIN |
| TX Power | -8.0~1.0dBm | Receiver Sensitivity | < -13dBm |
| Power Consumption | ≤1.5W | Modulation | NRZ |
| Protocols | IEEE 802.3 40GBASE-SR4, SFF-8436 | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber Choice: Only works with OM3 / OM4 multi‑mode MPO‑12 trunk cable; single‑mode fiber cannot support 850nm SR4 transmission and will lead to link failure.
Distance Limit: Max 100m on OM3 MMF, max 150m on OM4 MMF; excessive splices, dirty end‑faces or sharp bends reduce actual working distance.
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Installation Specification: Hot‑plug supported; keep MPO connector end‑faces clean, observe minimum fiber‑bend radius requirements.
Operating Environment: Commercial temperature range 0°C‑70°C; maintain cabinet airflow to avoid module overheating.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
Primary Application Scenarios
• Intra‑data‑center short‑haul backbone links between Check Point security gateway appliances
• 40G high‑speed trunk expansion for enterprise security fabric architectures
• Top‑of‑Rack 40G uplinks connecting security gateways to compute and virtualisation server farms
• Rack‑to‑rack short‑range multi‑mode fiber connections inside security‑focused data‑center halls
• Enterprise and MSSP security infrastructure refresh and network modernisation initiatives
• Multi‑vendor hybrid‑fabric deployments for cloud security workload environments




1. 40G Connectivity for Data Center
High speed, low overhead. The QSFP+ 40G transceiver brings gigabit-class throughput to dense data center racks while drawing less power and taking up less space.



FAQ
Q1: Can HYTOPTODEVICE QSFP+ 40G SR4 work within mixed‑vendor hardware during multi‑brand security gateway project purchase? A: HYTOPTODEVICE QSFP+ 40G SR4 supports multi‑vendor security and switch environments, as our modules are pre‑programmed with brand‑specific EEPROM profiles; provide your exact Check Point appliance model and Gaia OS firmware version before you place purchase order so we can confirm full interoperability for your mixed‑vendor fabric deployment.
Q2: Is it practical to deploy QSFP+ 40G SR4 inside QSFP28 100G‑capable ports for speed‑down application on Check Point security appliances? A: You can install HYTOPTODEVICE QSFP+ 40G SR4 inside QSFP28 ports only if host security hardware supports speed reconfiguration down to 40G, since this speed‑down capability differs per appliance platform; verify port specification with your hardware vendor before completing your wholesale procurement.
Q3: Do buyers need mandatory firmware updates on Check Point Gaia OS to recognise third‑party QSFP+ 40G SR4 optic? A: Mandatory firmware upgrade is not always required for HYTOPTODEVICE QSFP+ 40G SR4, standards‑compliant modules can be natively identified by most Check Point Gaia OS builds; certain appliance revisions may need minor firmware update or feature license, please review official release notes before field deployment.
Q4: Can I directly interconnect HYTOPTODEVICE QSFP+ 40G SR4 optical transceiver with DAC or AOC assemblies on opposite link side for security backbone links? A: Direct interconnection between QSFP+ 40G SR4 optics and DAC/AOC assemblies is not feasible, because SR4 relies on multi‑lane parallel optical signalling while DAC/AOC adopt totally different physical interfaces; pair this optic only with matching SR4 transceiver or qualified media converter to establish valid security‑traffic‑bearing data links.
Q5: What real‑world transmission distances should MSSP integrators expect when buying Check Point‑compatible QSFP+ 40G SR4 for security data‑center build? A: This HYTOPTODEVICE QSFP+ 40G SR4 delivers 100‑meter working reach over OM3 multimode fiber and 150‑meter over OM4 multimode fiber following IEEE 802.3ba specification; select LR4 or ER4 single‑mode transceivers for any security‑bearing link that exceeds these distance limits.
Q6: Which optical wavelength specification does wholesale‑order QSFP+ 40G SR4 from HYTOPTODEVICE adopt for parallel lane security‑traffic transmission? A: Our HYTOPTODEVICE QSFP+ 40G SR4 utilises industry‑standard 850nm VCSEL array, running four independent 10G NRZ lanes to achieve aggregate 40Gbps throughput; this wavelength design is optimised for short‑haul multimode fiber intra‑security‑data‑center connections.
Q7: What operating temperature range applies to commercial‑grade QSFP+ 40G SR4 when purchased for Check Point appliance rack deployment? A: Standard HYTOPTODEVICE commercial QSFP+ 40G SR4 modules operate reliably within 0°C‑70°C ambient temperature range, while industrial‑grade variants support ‑40°C to +85°C for harsh non‑data‑center locations; notify our sales team during your purchase inquiry if you require industrial temperature parts for your security project.
Q8: Does HYTOPTODEVICE QSFP+ 40G SR4 support breakout function to reuse existing 10G SFP+ ports during Check Point security fabric upgrade projects? A: Breakout into four separate 10G links is achievable with HYTOPTODEVICE QSFP+ 40G SR4 when paired with compliant MPO‑to‑4×LC fan‑out cable; this practical architecture helps security buyers maximise existing 10G hardware investment during infrastructure renovation.
Q9: Can security administrators read lane‑by‑lane real‑time optical metrics after purchasing HYTOPTODEVICE Check Point‑compatible QSFP+ 40G SR4? A: Per‑lane real‑time optical monitoring is available on HYTOPTODEVICE QSFP+ 40G SR4 thanks to built‑in DDM/DOM functionality, allowing operators to retrieve transmit power, receive power and module temperature data directly from Gaia OS CLI for routine security‑fabric link health diagnostics.
Q10: What physical fiber connector interface comes fitted on the replacement QSFP+ 40G SR4 module for Check Point security appliance procurement? A: HYTOPTODEVICE CPAC‑TR‑40SR‑SSM160‑QSFP substitute QSFP+ 40G SR4 uses 12‑pin MPO/MTP connector with 8 functional optical fibres for four transmit plus four receive lanes; all trunk cables, patch cords and panel adapters within your security‑fabric cabling system must match this connector type to bring up valid inspection‑traffic links.
Q11: How will MPO cable polarity Type A/B/C impact successful link bring‑up after bulk purchase of HYTOPTODEVICE QSFP+ 40G SR4 transceivers for security gateways? A: MPO polarity mismatch ranks among common root causes of link‑down events for HYTOPTODEVICE QSFP+ 40G SR4 security‑fabric deployments, as Type A, B and C polarity follow different fibre mapping rules; collaborate with your cabling engineer to confirm correct polarity type before purchasing matching fiber assemblies for security infrastructure.
Q12: Why should MSSP project buyers choose QSFP+ 40G SR4 optical transceivers instead of low‑cost DAC cables for Check Point rack‑to‑rack security‑fabric connections? A: HYTOPTODEVICE QSFP+ 40G SR4 optics bring practical advantages over DAC for many security‑fabric rack‑to‑rack links, DAC cables only support maximum 3‑7‑meter distance and cannot be field‑repaired; SR4 supports up to 150‑meter reach, flexible cable routing and easy individual module swap during security‑appliance hardware maintenance windows.
Q13: What key procurement differences exist between genuine OEM Check Point optics versus HYTOPTODEVICE MSA‑compliant QSFP+ 40G SR4 transceivers for MSSP deployments? A: HYTOPTODEVICE compatible QSFP+ 40G SR4 delivers equivalent hardware performance following global MSA standards, while OEM transceivers carry original Check Point vendor branding with premium pricing; our compatible units can realise significant security‑project cost reduction and come with HYTOPTODEVICE‑backed warranty and technical support resources.
Q14: What pre‑shipment quality validation procedures does HYTOPTODEVICE perform for each QSFP+ 40G SR4 before bulk security‑project shipment? A: Every HYTOPTODEVICE QSFP+ 40G SR4 undergoes complete 100‑percent optical parameter testing including transmit power, receive sensitivity and BER measurement plus multi‑security‑appliance compatibility verification; full test documentation can be provided upon request for large enterprise and MSSP tender purchase projects.
Q15: Can security integrators order pre‑sales sample units of HYTOPTODEVICE QSFP+ 40G SR4 before committing to large‑volume bulk procurement for Check Point environments? A: Sample testing is supported for HYTOPTODEVICE QSFP+ 40G SR4 transceiver orders, with small‑quantity sample shipments available for real‑machine validation on your Check Point security appliance hardware; contact our sales team to get sample pricing and production lead‑time for your upcoming security‑fabric network upgrade project
Packaging & Custom OEM Solutions
Each QSFP+ SR4 module is individually sealed in ESD-safe anti-static packaging and stocked for same-day dispatch. Bulk orders can also be customized with OEM packaging—logo printing and private labeling included—built for network distributors, system integrators, and enterprise deployments.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.



