• EXTREME Compatible 100BASE-LX 1310nm 10km SFP Optical Transceiver
  • 100Mbps Fast Ethernet Duplex LC SMF SFP Module for Enterprise LAN
  • Bulk Wholesale 10km 100BASE-LX SFP Transceiver with DDM Monitoring
  • Zero Alarm Plug and Play Extreme Compatible 100M SFP Fiber transceiver Module
  • EXTREME Compatible 100BASE-LX 1310nm 10km SFP Optical Transceiver
  • 100Mbps Fast Ethernet Duplex LC SMF SFP Module for Enterprise LAN
  • Bulk Wholesale 10km 100BASE-LX SFP Transceiver with DDM Monitoring
  • Zero Alarm Plug and Play Extreme Compatible 100M SFP Fiber transceiver Module

Brocade E1MG-100FX-10 Compatible 100M SFP Module | 100BASE-LX 1310nm 10km Bulk Factory Wholesale | HYTOPTODEVICE

Shop high-quality Brocade E1MG-100FX-10 compatible SFP Module. Standard 100BASE-LX 1310nm 10km single-mode SFP Module with DDM monitoring. Purchase factory direct bulk SFP Module for Brocade network upgrades with fast delivery. Support bulk wholesale, private label and custom EEPROM programming for global importers, distributors and system integrators.  
NO. Brand  Compatible P/N Remarks
1 Cisco  GLC-FE-100LX-RGD IND
2 Cisco  GLC-FE-100LX 
3 Extreme MGBIC-LC05
4 H3C  SFP-FE-LX-SM1310-D 
5 HPE(H3C)  JF832A older
6 Brocade E1MG-100FX-10 
7 Juniper  EX-SFP-1FE-LX 
8 HPE(H3C)  JD120B
9 Dell GP-SFP2-1L-C
Description

Brocade E1MG-100FX-10 Compatible 100M SFP Module | 100BASE‑LX 1310nm 10km Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE Brocade E1MG-100FX-10 compatible SFP Module is a reliable drop-in replacement for original Brocade optical modules. Adopting 100BASE-LX standard, 1310nm wavelength and duplex LC interface, this SFP Module delivers stable 10km single-mode fiber transmission with built-in DDM real-time monitoring, perfectly matching Brocade Fast Ethernet port performance.
Pre-flashed dedicated EEPROM ensures zero-alarm plug-and-play recognition on Brocade switching devices without extra configuration. With strict batch testing and stable consistency, this SFP Module is ideal for factory wholesale, bulk purchase and large-scale enterprise network renovation projects.

Key Technical Specifications

Brocade Compatible  E1MG-100FX-10 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 100Mbps
Wavelength 1310nm Max  Distance 10KM
Connector Duplex LC Transmitter Type FP 1310nm
Cable Type SMF Receiver Type PIN
TX Power -14~-8dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤1W Receiver Overload -8.0dBm
Protocols IEEE802.3ab, GR-468, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Port Matching

    Use standard G.652.D duplex single-mode fiber (SMF) with LC-PC/UPC connectors. Multimode fiber is not supported and will fail to reach 10km. Ensure the SFP port supports 100Mbps mode before insertion.

  • Installation & Hot-Swap Rules

    Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.

  • Link Loss Budget

    Offers a 20dB link budget for 10km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.

  • Operating Environment

    Commercial grade: 0°C to 70°C in indoor environments. Keep away from extreme heat, moisture, and dust for long-term stability.

  • Real-Time Monitoring (DDM)

    Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.

  • Bulk Deployment

    Standardize fiber types and port settings across enterprise LAN or ISP deployments for consistent performance.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware

Custom-tuned EEPROM enables zero-alarm plug-and-play for Brocade Fast Ethernet SFP ports, fully matching original E1MG-100FX-10 SFP Module performance without configuration adjustment.
  • Brocade FastIron FGS / FWS / SX Series Switches
  • Brocade ICX Series Enterprise Access Switches
  • Brocade Dual-rate 100M/1000BASE-X SFP Ports

2. Multi-Brand Cross Compatibility

This SFP Module complies with universal MSA standards for stable multi-brand interoperation. Custom firmware is available for mixed-vendor network SFP Module bulk deployment and procurement

3. Free Value-Added Services

We offer exclusive free value-added services for all  sfp modules  to reduce your project deployment and maintenance costs.
  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Cost-effective wholesale for large-scale deployment
  • Free custom EEPROM programming for special and legacy network environments

Primary Application Scenarios

  • Enterprise campus long-distance fiber interconnection
  • Cross-building office 100Mbps fiber links
  • Legacy Fast Ethernet network module replacement
  • ISP access and enterprise backbone transmission
  • Bulk procurement for HPE/H3C network expansion

Connectivity Solutions(Applications)

Deploy paired Brocade compatible SFP Module with G.652.D single-mode fiber to establish stable 10km 100Mbps point-to-point links for campus and enterprise network construction.

100M FAST ETHERNET COMPATIBLE optical module

The Core Feature

1. Low-Power Data Center Efficient Connectivity

With ultra-low power consumption below 1W, this 100BASE SFP provides stable, cost-effective Fast Ethernet connectivity. It is an economical solution for data center, campus and enterprise low-speed access networking.

Low Power 100BASE-LX SFP Transceiver for Data Center and ISP Network


2.
Verified Host Interoperability for Devices

Pre-flashed EEPROM supports hot-swap plug-and-play. The module is fully recognized by mainstream Brocade devices without alarms or configuration adjustments, enabling seamless network replacement and upgrade.
HYTOPTODEVICE Zero Alarm Plug and Play Cisco Compatible 100M SFP Fiber Module

3.Rigorous Testing, Uncompromising Reliability

Each SFP undergoes wavelength calibration, power testing, 72-hour aging and 10km link testing. Full quality inspection ensures stable batch performance and long-term reliable operation for engineering projects.

HYTOPTODEVICE MSA Compliant Replacement Optical Transceiver Full Tested


FAQ

Q1: What happens if my singlemode fiber link is shorter than 2km (e.g., 100 meters)? Will it burn the receiver?
A: Short 100m to 2km single-mode fiber links will not burn or damage the receiver of this Brocade E1MG-100FX-10 SFP Module. Equipped with built-in optical power adaptive protection, this 100BASE-LX SFP Module automatically adjusts signal intensity for ultra-short fiber connections, ensuring safe, stable and error-free operation for short-distance enterprise networking.

Q2: Can I use UPC vs. APC fiber patch cables with 100BASE-LX transceivers?
A: This 100BASE-LX SFP Module is designed for standard UPC-polished LC fiber connectors, perfectly matching conventional G.652 single-mode patch cables. APC cables introduce excessive insertion loss and reflectance mismatch, which triggers unstable links and packet loss. For reliable SFP Module operation, always deploy UPC-terminated fiber cables.

Q3: Does 100BASE-LX work over OS1 and OS2 singlemode fibers?
A: The Brocade compatible 100BASE-LX SFP Module fully supports both OS1 and OS2 single-mode fiber types. Both fiber grades meet 1310nm wavelength transmission standards, enabling this SFP Module to deliver consistent 10km 100Mbps transmission performance for indoor and outdoor enterprise fiber deployments.

Q4: Why am I getting high Bit Error Rate (BER) or packet loss on my 10km link?
A: High BER and packet loss on 10km links are mainly caused by dirty fiber connectors, excessive fiber bending, poor splicing joints, or mismatched fiber specifications. This high-quality SFP Module features sufficient power margin; regular port cleaning and standardized fiber layout can eliminate most link instability issues for long-distance transmission.

Q5: How do I know if the optical laser has degraded or failed?
A: You can monitor laser status in real time via the SFP Module’s DDM diagnostic function. Gradually decreased transmit optical power, fluctuating operating temperature, and persistent link flapping are typical signs of laser degradation. No optical signal output and complete link outage indicate laser failure of the 100BASE-LX transceiver.

Q6: How can I test if the 100BASE-LX transceiver itself is faulty?
A: Verify SFP Module integrity through multiple methods: swap with a known-good working module for contrast testing, check DDM optical parameter data via switch CLI, inspect for physical port contamination, and test link status with standard single-mode fiber. Consistent transmission failure confirms a faulty 100BASE-LX SFP Module.

Q7: What is the difference between 100BASE-LX and 100BASE-EX or ZX?
A: 100BASE-LX SFP Module supports 1310nm wavelength and 10km transmission, ideal for conventional campus networking. 100BASE-EX extends transmission to 40km, while 100BASE-ZX reaches 80km with different optical power budgets. Our E1MG-100FX-10 module strictly follows 10km LX specifications for standard short-to-medium range enterprise links.

Q8: Is 100BASE-LX available in SFP, SFP+, or fixed RJ45 formats?
A: The 100BASE-LX standard only supports traditional SFP package formats, consistent with our Brocade E1MG-100FX-10 SFP Module design. It is incompatible with high-speed 10G SFP+ ports and electrical RJ45 copper ports, with no cross-format adaptive support.

Q9: Does the 1310nm Fabry-Perot (FP) laser degrade faster in high heat?
A: Long-term ultra-high temperature operation will accelerate the aging of FP laser chips and shorten the service life of the 100BASE-LX SFP Module. This commercial-grade transceiver supports 0°C~70°C stable operation; working within the rated temperature range effectively avoids rapid laser degradation and ensures long-term batch deployment stability.

Q10: Why are original OEM 100BASE-LX transceivers so expensive compared to third-party optics?
A: Official OEM transceivers carry brand premium, patent authorization and overpriced after-sales services, leading to high procurement costs. Our third-party Brocade compatible SFP Module retains full 100BASE-LX performance and zero-alarm compatibility, providing cost-effective bulk procurement solutions without sacrificing network stability.

Q11: Will using a third-party 100BASE-LX module void my switch OEM warranty?
A: Standard compliant third-party SFP Module will not void switch OEM warranties. Our E1MG-100FX-10 transceiver strictly complies with MSA and IEEE industry standards, features stable compatibility, and causes no hardware or protocol conflicts with original Brocade switching devices.

Q12: Is the laser in a 100BASE-LX transceiver safe to look into directly?
A: Direct eye exposure to the internal laser of a working 100BASE-LX SFP Module is unsafe and prohibited. Though classified as Class 1 laser, long-term or close-range viewing may cause retinal damage. Always power off the module and cap optical ports before manual inspection.

Q13: Can I downgrade a 1000BASE-LX port to run at 100BASE-LX speed?
A: Most Brocade dual-rate SFP ports support automatic speed downgrade. This 100BASE-LX SFP Module can be normally identified on 1000BASE-LX gigabit ports, automatically negotiating and locking at 100Mbps speed, realizing seamless adaptation of gigabit ports for Fast Ethernet networking.
Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • EXTREME Compatible 100BASE-LX 1310nm 10km SFP Optical Transceiver
  • 100Mbps Fast Ethernet Duplex LC SMF SFP Module for Enterprise LAN
  • Bulk Wholesale 10km 100BASE-LX SFP Transceiver with DDM Monitoring
  • Zero Alarm Plug and Play Extreme Compatible 100M SFP Fiber transceiver Module

Download