| NO. | Brand | Compatible P/N | Remarks |
| 1 | Cisco | GLC-EZX-SM-100 | |
| 2 | Arista Networks | SFP-1G-EZX-100 | |
| 3 | Huawei | eSFP-GE-ZX100-SM1550 | |
| 4 | Juniper | SFP-1GE-EZX-100 | |
| 5 | Brocade | E1MG-EZX-100 |
| Arista Compatible | SFP-1G-EZX-100 | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Max Data Rate | 1.25Gbps |
| Wavelength | 1550nm | Max Distance | 100km |
| Connector | Duplex LC | Transmitter Type | 1550nm DFB |
| Cable Type | SMF | Receiver Type | APD |
| TX Power | 0~+5dBm | Receiver Sensitivity | < -29.0dBm |
| Protocols | SFF-8472 MSA Compliant, IEEE 802.3ah-2004 | Operation Temperature | 0°C to 70°C (32 to 158°F) |
Full Compatibility List and Supported Devices of Fiber Optic Transceiver
One of the biggest advantages of third-party optical transceiver is their strong brand compatibility,which helps enterprises cut hardware costs without sacrificing performance.Our 1G SFP 100km optical transceivers are fully tested and certified to work seamlessly with the Arista Networks equipments:
Arista 7010T Series: DCS-7010T-48, DCS-7010T-48-DC
Arista 7050X & 7050X3 Series (utilizing 1G configurations/breakouts): DCS-7050SX3-48YC12, DCS-7050TX3-48C8, DCS-7050QX-32S
Arista 7150S Series: DCS-7150S-24, DCS-7150S-52, DCS-7150S-64
Arista 720XP Series (Campus PoE Switches): DCS-720XP-48Y6, DCS-720XP-24ZY4
Arista 7280R / 7280R3 Series (Data Center Routing): DCS-7280SR-48C6, DCS-7280QR-C36
Main Application Scenarios of Fiber Connection Module
Long-Distance Cloud & Edge Aggregation: Linking remote edge nodes or regional private clouds back to core Arista data center frameworks.
Campus & Municipal Backbone Networking: Bridging widely distributed locations—such as corporate multi-building campuses or smart city municipal networks—across distances approaching 100km.
Metro Ethernet & Telco Backhaul: Utilizing Arista switches to aggregate or backhaul 1G internet traffic across regional transport networks.
Disaster Recovery (DR) Mirroring: Connecting geographically isolated primary servers to secondary backup data facilities for safe synchronous/asynchronous data replication.



Q1: What is the Arista SFP-1G-EZX-100 transceiver designed for?
A1: It is designed for ultra-long-haul 1G Gigabit Ethernet applications over single-mode fiber infrastructure up to 100km.
Q2: Will Arista EOS flag this compatible module as an "unsupported transceiver"?
A2: No, our modules are encoded with precise Arista EEPROM signatures so they register natively as original modules without needing any special system override commands.
Q3: Do I need to force port speeds to 1G when putting this into an Arista 10G SFP+ slot?
A3: Yes. On many Arista switches, multi-rate slots default to 10G. You will likely need to use the speed 1000 configuration command under the interface profile.
Q4: What happens if I use this 100km module on a short 5km fiber run?
A4: The high-power APD receiver will likely experience "optical saturation" or sustain permanent damage. You must use inline optical attenuators to reduce the signal level to a safe threshold.
Q5: What level of attenuation (dB) is typically needed if testing this module in a lab?
A5: A 15dB to 20dB fixed optical attenuator is highly recommended for short-range benchmarking or loopback laboratory testing.
Q6: What is the operating wavelength of the Arista SFP-1G-EZX-100?
A6: It functions exclusively at 1550nm, the optimal spectral band for low-loss long-range fiber transmissions.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






