MikroTik S-31DLC40D Compatible 1000BASE-EX Fiber Optic Transceiver | SFP 1310nm 40km SMF Bulk Wholesale | HYTOPTODEVICE
Product Overview
This 1000BASE-EX fiber optic transceiver delivers full pin-to-pin and firmware compatibility with MikroTik S-31DLC40D. Custom EEPROM programming eliminates device recognition errors and system alarms for seamless plug-and-play operation on MikroTik routing and switching platforms.
Featuring 1310nm wavelength and 40km single-mode fiber reach, this fiber optic transceiver ensures stable long-distance gigabit transmission, ideal for wide-area network deployment, bulk procurement and inventory stocking.
Every fiber optic transceiver undergoes strict MikroTik compatibility verification and high-temperature aging tests, delivering consistent batch quality for commercial wholesale and large-scale network implementation.
Key Technical Specifications
| MikroTik Compatible |
S-31DLC40D |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP |
Max Data Rate |
1.25Gbps |
| Wavelength |
1310nm |
Max Distance |
40km |
| Connector |
Duplex LC |
Transmitter Type |
1310nm DFB |
| Cable Type |
SMF |
Receiver Type |
PIN |
| TX Power |
-5.0~0dBm |
Receiver Sensitivity |
< -23.0dBm |
| Typical Power Consumption |
≤1W |
Receiver Overload |
-1dBm |
| Bit Error Ratio (BER) |
1E-12 |
DDM/DOM |
Support |
| Protocols |
SFF-8472 MSA Compliant, IEEE 802.3ah-2004 |
Operation Temperature |
0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
- Fiber Choice: Use Single-Mode Fiber (SMF) only. Do NOT use MMF
- Laser Safety: Never look directly into optical ports or fiber ends.
- ESD Safety:: Wear an anti-static wrist strap before handling.
-
Connector Match: UPC/PC polish only. Do NOT use APC
-
Cleanliness & Dust: Keep dust caps on all unused ports and connectors at all times. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
-
Optical Attenuator Required for Short Links: For testing or short-distance connections (<10 km), connect a 5dB–10dB optical attenuator to the RX port to prevent damaging the receiver.
-
Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.
-
High Loss/Packet Drops: Check fiber bend radius (>30 mm); inspect optical power levels; clean optical connectors
-
No Link: Swap TX/RX fiber connections; clean fiber end-faces; verify port settings.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
This MikroTik-compatible fiber optic transceiver supports zero-alarm plug-and-play operation with mainstream MikroTik routers and switches, fully compatible with new and legacy RouterOS firmware versions. Supported device series are listed below:
-
MikroTik CCR Series Cloud Core Routers
-
MikroTik RB2011/RB3011/RB4011 Enterprise Router Platforms
-
MikroTik Enterprise Gigabit Switching & Routing Devices
2. Multi-Brand Cross Compatibility
Compliant with SFP MSA standards, this fiber optic transceiver module supports multi-brand interconnection, meeting mixed-vendor equipment procurement and wholesale distribution needs.
3. Free Value-Added Services
HYTOPTODEVICE delivers complete fiber optic transceiver procurement packages: free sample validation, custom EEPROM programming, OEM options, low‑MOQ bulk wholesale and stable long‑term project supply contracts.
Main Application Scenarios
-
Wide-Area Network Construction: Bulk deployment of 40km long-reach fiber optic transceiver for cross-town, cross-branch and remote base station fiber interconnection
-
Network Distributor Inventory Stocking: Cost-effective MikroTik S-31DLC40D replacement fiber optic transceiver for daily wholesale and retail distribution business
-
Enterprise Network Upgrade & Expansion: Batch procurement of gigabit SFP optics for MikroTik routing and switching equipment renewal and long-distance network expansion
-
Global Network Product Wholesale: Customizable low-MOQ fiber optic transceiver for cross-border network equipment traders and system integration suppliers
Connectivity Solutions(Applications)
1.1GbE Switch-to-Switch Connectivity

2.1GbE Switch to Media Converter Connectivity
The Core Feature
1.40km 1G Low-Power Interconnect
High-efficiency, low-power design that prevents overheating and signal drop, optimized for enterprise data center scaling.
2.Host-Tested for Proven Interoperability
All fiber optic transceivers pass real
Palo Alto Networks device testing. Pre-flashed EEPROM ensures zero-alarm recognition, fixing third-party module incompatibility and link flapping for safe bulk purchase.Specific Compatibility Video available upon request.
3.100% Tested for Zero-Defect Reliability
Step inside our
Test Center to see how we guarantee maximum network uptime and zero-defect reliability for every fiber optic transceiver before it leaves the factory.

FAQ
Q1: Are green APC LC fiber cables compatible with MikroTik S-31DLC40D fiber optic transceiver for long-distance networking?
A: No. Standard MikroTik SFP ports only support UPC/PC blue connectors. APC connectors trigger excessive insertion loss and alignment errors, resulting in unstable optical links.
Q2: Can MikroTik compatible 1000BASE-EX fiber optic transceiver be hot-swapped during device operation?
A: Yes. This compatible optical module features a full hot-swappable design, enabling safe plugging and unplugging while MikroTik routing and switching equipment remains running.
Q3: What is the long-term operational reliability (MTBF) of 40km 1310nm MikroTik fiber optic transceiver?
A: Qualified long-reach fiber optic transceiver boasts an industry-leading MTBF of over 1,000,000 hours, supporting stable long-term commercial network operation.
Q4: Do third-party MikroTik S-31DLC40D fiber optic transceiver deliver the same performance as original modules? A: Standard compliant third-party fiber optic transceiver delivers identical 40km transmission performance and RouterOS compatibility as original units, with more competitive bulk wholesale pricing.
Q5: Is commercial-grade MikroTik fiber optic transceiver suitable for outdoor uncooled cabinet deployment scenarios?
A: No. Commercial optical modules only adapt to 0℃-70℃ indoor environments. Outdoor unregulated deployment requires industrial-grade wide-temperature fiber optic transceiver.
Q6: What laser safety certification do 1310nm 40km MikroTik EX fiber optic transceiver meet?
A: The built-in 1310nm laser chip is certified as a Class 1 Laser Product, ensuring complete safety for daily network operation and maintenance work.
Q7: What is the typical power consumption of gigabit long-range MikroTik fiber optic transceiver?
A: This low-power fiber optic transceiver consumes less than 1.0W, effectively reducing overall energy consumption of enterprise network systems.
Q8: Can 1000BASE-EX MikroTik fiber optic transceiver adapt to 1G Fibre Channel network transmission?
A: Yes. The gigabit fiber optic transceiver supports both IEEE 802.3z Gigabit Ethernet and 1GFC Fibre Channel protocols for multi-scenario network interconnection.
Q9: Do standard MikroTik EX fiber optic transceiver support professional SONET and SDH transmission services?
A: Regular Ethernet fiber optic transceiver does not support SONET/SDH transmission, which requires specially customized multi-rate optical modules.
Q10: How to resolve common link down failures on deployed MikroTik 40km fiber optic transceiver?
A: Reverse fiber polarity, clean dirty fiber end faces, manually lock port speed to 1Gbps, and verify device compatibility to resolve link-down failures efficiently.
Q11: Which professional testing tools apply to MikroTik long-distance fiber optic transceiver signal detection?
A: An Optical Power Meter (OPM) or Visual Fault Locator (VFL) can safely and accurately detect the working status of 40km fiber optic transceiver.
Q12: What key factors cause CRC errors and packet loss on MikroTik long-reach transceiver links?
A: Dirty LC connectors, damaged single-mode patch cords, or optical attenuation close to -19dBm are the main causes of unstable data transmission.
Q13: Will using compatible third-party fiber optic transceiver void MikroTik network device warranties?
A: No. Relevant consumer protection regulations prohibit manufacturers from voiding device warranties due to the use of qualified compatible third-party fiber optic transceiver.
Q14: What quality testing processes do MikroTik compatible fiber optic transceiver complete before factory shipment?
A: Each batch of fiber optic transceiver undergoes 100% full testing including eye diagram analysis, optical power calibration, receiver sensitivity testing and MikroTik equipment interoperability verification.
Q15: Are MikroTik 1G 40km fiber optic transceiver compatible with mainstream fiber media converter devices?
A: Yes. The gigabit fiber optic transceiver works with all mainstream fiber media converters equipped with standard 1G-rate SFP slots.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
- ISO 9001:2015 certified manufacturing facility in Shenzhen
- Average lead time of 3–5 business days with DHL/FedEx express options
- Dedicated pre-sales engineering support for custom configurations
- Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy.
- We can provide inspection and shipping videos to make you feel as if you are right here with the product.
"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


