• HYTOPTODEVICE Cisco SFP‑10G‑LRM compatible SFP+ 10G LRM transceiver 10GBASE‑LRM 1310nm 220m multimode LC DDM fiber optic module
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale Cisco Nexus switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for Cisco switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lr module 1310nm 10km smf for Extreme switch
  • HYTOPTODEVICE Cisco SFP‑10G‑LRM compatible SFP+ 10G LRM transceiver 10GBASE‑LRM 1310nm 220m multimode LC DDM fiber optic module
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale Cisco Nexus switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for Cisco switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lr module 1310nm 10km smf for Extreme switch

Cisco SFP-10G-LRM Compatible SFP+ 10G LRM Transceiver | 10GBASE-LRM 1310nm 220m MMF Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE drop‑in replacement for Cisco SFP‑10G‑LRM SFP+ 10G LRM transceiver, 10.3125Gbps 1310nm FP laser, 220‑meter reach over OM3 / OM4 multimode fiber, duplex LC interface with full SFF‑8472 DDM support. Pre‑programmed Cisco‑specific EEPROM to avoid third‑party transceiver alerts. Bulk wholesale, private‑label marking and custom EEPROM programming available for data‑center integrators and global distributors.
NO. Brand  Compatible P/N Remarks
1 Cisco SFP-10G-LRM 
2 Arista Networks  SFP-10G-LRM 
3  H3C  SFP-XG-LRM-MM1310 
4 HPE ProCure J9152A
5 HPE Aruba J9152D
6 HPE BladeSystem 455889-B21
7 Huawei  OSXD22N00 
8 Dell 330-2403 
9 Juniper  EX-SFP-10GE-LRM
10 Brocade  10G-SFPP-LRM 



Description

Cisco SFP‑10G‑LRM Compatible SFP+ 10G LRM Transceiver | 10GBASE‑LRM 1310nm 220m MMF Bulk Wholesale

Product Overview

HYTOPTODEVICE SFP+ 10G LRM transceiver functions as drop‑in alternative for Cisco SFP‑10G‑LRM, purpose‑built to deliver stable 10‑gigabit performance over OM3 / OM4 multimode fiber on Cisco enterprise and data‑center switches.
This MSA‑compliant 10GBASE‑LRM SFP+ optical unit adopts 1310 nm FP laser architecture, delivering 220 m transmission via duplex LC connectors. It meets IEEE 802.3aq, SFF‑8431 and SFF‑8472 industry standards, equipped with complete DDM real‑time diagnostic capability helping network technicians locate fiber‑layer faults efficiently.
Every HYTOPTODEVICE SFP+ 10G LRM transceiver ships pre‑flashed with Cisco‑optimized EEPROM profiles, eliminating unrecognized‑transceiver pop‑ups and unexpected port shutdown risks. Low power draw reduces thermal stress inside densely populated racks. Perfect for data‑center refresh, intra‑building short‑reach backbone links and high‑volume purchasing for system integrators and overseas resellers.

Key Technical Specifications
 
Cisco Compatible SFP-10G-LRM Vendor Name HYTOPTODEVICE
Form Factor SFP+ Max Data Rate 10.3125Gbps
Wavelength 1310nm Max  Distance 220m@OM3/300m@SMF
Connector Duplex LC Transmitter Type 1310nm FP
Cable Type 50/125µm@OM3 MMF, 9/125μm@SMF Receiver Type PIN
TX Power -6.5~-0.5dBm Receiver Sensitivity < -10.0dBm
Power Consumption ≤1W Receiver Overload 1.5dBm
Protocols IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber Compatibility: Designed exclusively for G.652 OS2 single-mode fiber. Multimode fibers (OM3/OM4) or incompatible connector polish types (e.g., APC if the module requires UPC) will cause high attenuation and reduce transmission range.

  • Maintenance & Polarity: Clean LC optical connectors regularly before insertion. Dust and debris on the end face can lead to signal loss and degrade SFP+ 10G LR performance.

  • Distance & Link Budget: Supports up to a 10 km transmission distance within the standard optical power budget. Excessive fiber splices, patch panels, or sharp bends will shorten the usable range.

  • Thermal Management: Operating power consumption is ≤ 1 W, requiring no additional heat sinks under standard commercial temperatures (0°C to 70°C).

  • Industrial Grade Option: For outdoor cabinet deployments requiring extreme temperatures, contact sales for our industrial-grade (-40°C to 85°C) SFP+ 10G LR modules.

Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware

HYTOPTODEVICE SFP+ 10G LR module matches mechanical dimensions and optical performance indicators of original Extreme 10GB‑LRLX‑SFPP. Custom‑tuned EEPROM firmware suppresses third‑party transceiver warning logs. Every production batch undergoes real‑machine traffic testing on genuine Extreme hardware to prevent signal offset and unstable long‑distance fiber performance.

Validated Extreme Platforms:
• Extreme X440‑G2 / X460‑G2 Enterprise Switches
• Extreme VSP 7400 / VSP 8400 Chassis‑series switches
• Extreme X695 high‑density data center switches
• Extreme Summit series rack‑mount enterprise switching appliances
• Enterprise servers equipped with SFP+ capable network interface adapters

2. Multi-Brand Cross Compatibility

Built upon universal SFP+ MSA standard, HYTOPTODEVICE SFP+ 10G LR transceiver maintains stable performance across EdgeCore, Cisco, Arista, Juniper, Dell, Huawei and other mainstream network hardware. Ideal for multi‑vendor mixed‑fabric open‑compute environments, inter‑building fiber runs and legacy structured cabling renovation projects.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

• 10‑km inter‑building single‑mode fiber backbones for Extreme open‑compute data centers
• Phased network refresh migrating legacy infrastructure toward 10‑gigabit speeds
• Long‑reach 10G uplink connections for aggregation and top‑of‑rack white‑box switches
• 40G‑to‑4×10G breakout mixed‑speed fabric construction
• Bulk supply for global optical component distributors and system integration contractors
• Multi‑vendor hybrid data‑center rack‑to‑rack long‑distance fiber interconnections

Connectivity Solutions(Applications)

1. 10G to 10G for Switch-Switch Interconnection
Build low‑latency reliable 10G trunk links between Extreme core and aggregation open switches. The 1310nm DFB laser preserves clean signal quality across full 10km OS2 fiber spans, supporting heavy east‑west data traffic while simplifying dense LC patch‑cord management.

10G‑to‑10G switch‑to‑switch trunk built with Cisco‑compatible SFP+ 10G LRM transceiver over multimode fiber

2.10G for Switch-Media Converter

This Extreme compatible SFP+ 10G LR module establishes stable long‑haul fiber links between Extreme switches and remote optical media converters. It extends campus network coverage without replacing existing copper cabling for distributed branch sites.

Fiber interconnection using SFP+ 10G LRM transceiver between Cisco switch and media converter within data‑center premises

3.10G for Switch to NIC

Install HYTOPTODEVICE SFP+ 10G LR transceiver on Extreme TOR switches and server SFP+ NICs for rack‑to‑rack interconnection. Compact SFP+ footprint improves port density, and low‑power characteristic prevents rack overheating under full‑port populated conditions.

10G uplink from Cisco top‑of‑rack switch to server SFP+ NIC using multimode fiber plant

4.10G Structured Cabling Deployment

1310nm long‑reach single‑mode design fits perfectly with standardized enterprise LC fiber infrastructure. Compatible with centralized fiber distribution frames, it supports expandable multi‑site campus growth and reserves smooth upgrade paths for future higher‑speed generations.

Enterprise multimode LC structured cabling deployment with mass‑installed SFP+ 10G LRM transceiver modules

The Core Feature 

1.10G High-Density & Ultra-Low Power Connectivity

Low‑power, high‑density SFP+ 10G LR module delivers cost‑effective 10G upgrade paths for Extreme‑based networks. Multiple connection topologies support phased expansion without full hardware replacement.

Power‑saving high‑density SFP+ 10G LRM transceiver for multimode fiber reuse in Cisco‑based data‑center 10G upgrade



2.
Verified Host Interoperability

Each production batch of HYTOPTODEVICE SFP+ 10G LR transceiver gets physical testing against Extreme open‑switch firmware and other mainstream network operating systems. Pre‑tuned EEPROM register data suppresses unauthorized‑transceiver warning logs, delivering consistent plug‑and‑play reliability for bulk‑order clients.


3.Rigorous Testing, Uncompromising Reliability

All units complete 10km fiber simulation, temperature cycling and 72-hour continuous traffic burn-in. Precision optical calibration minimizes signal fluctuation on long fiber runs. Built-in DOM enables remote fault detection for 24/7 backbone operation.

72-hour full traffic burn-in quality inspection for wholesale SFP+ 10G LR before shipment



FAQ

Q1: Is it feasible to install an SFP+ 10G LR unit into a 25G SFP28 port for regular network operation?
A: Most SFP28 physical ports feature backward compatibility for 10G SFP+ hardware and will auto‑negotiate down to 10Gbps line rate. Certain Extreme firmware revisions require manual port‑speed configuration to prevent unstable link negotiation states.

Q2: What factors trigger the “unsupported transceiver” warning message on Extreme network hardware?
A: This warning originates from mismatched vendor identification data stored inside module EEPROM memory. Our HYTOPTODEVICE modules ship pre‑programmed with Extreme identification parameters to bypass this validation check. Outdated switch firmware may also trigger this alert.

Q3: Can administrators access real‑time DDM diagnostic data from this SFP+ 10G LR module?
A: Yes, our HYTOPTODEVICE SFP+ 10G LR module supports complete DDM digital monitoring functions. Operators can retrieve live metrics such as transmit power, receive power, laser bias current, module temperature and supply voltage directly via Extreme switch command‑line interfaces.

Q4: How much power consumption should customers expect from this SFP+ 10G LR optical component?
A: Our commercial grade SFP+ 10G LR module consumes under 1 W during normal operation. Low energy consumption helps cut down overall thermal load inside racks when carrying out large‑scale module roll‑outs.

Q5: What working temperature range can this SFP+ 10G LR module sustain for continuous operation?
A: Standard commercial‑grade units deliver stable performance between 0°C and +70°C for indoor enterprise deployment. We also provide industrial‑spec variants rated ‑40°C to +85°C for outdoor cabinet and harsh‑environment deployment scenarios.

Q6: Both ends show valid transmit power readings, yet link indicator remains off, what brings about this issue?
A: This symptom generally points to receive‑side signal failure. Contaminated fiber end faces, damaged fiber cables, incorrect fiber category or accumulated excessive optical loss can block incoming light even though laser transmitters work normally. Checking DDM receive‑power readings accelerates troubleshooting workflows.

Q7: What practical distinctions exist between genuine OEM optics and third‑party SFP+ 10G LR replacement modules?
A: OEM optics are branded transceivers sold by network equipment vendors at premium price points. Our HYTOPTODEVICE third‑party alternatives follow identical MSA standards, come pre‑loaded with vendor‑specific EEPROM, complete full‑suite lab validation, and deliver obvious cost savings without compromising link performance for enterprise network builds.

Q8: Is SFP+ 10G LR module suitable for building‑to‑building interconnection covering a 500‑meter fiber span?
A: Absolutely. The 10GBASE‑LR specification supports up to 10 km transmission over OS2 single‑mode fiber. A 500‑meter cross‑building link falls well within its optical loss budget, on condition you deploy qualified single‑mode fiber and well‑maintained LC patch cords.

Q9: May I deploy passive optical splitters to duplicate traffic on point‑to‑point SFP+ 10G LR fiber links?
A: SFP+ 10G LR module is purpose‑built for bidirectional point‑to‑point Ethernet connections. Passive splitters introduce severe optical attenuation and cannot be applied for traffic splitting on this link type. PON‑optimized transceivers are required for splitter‑based network architectures.

Q10: Do infrared laser emissions from SFP+ 10G LR modules create eye‑safety risks for on‑site field technicians?
A: SFP+ 10G LR carries Class 1 laser safety rating under normal cabled operating conditions. Never stare directly into open module ports or unterminated fiber ends. Invisible infrared laser radiation may produce cumulative eye damage even without visible light output.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • HYTOPTODEVICE Cisco SFP‑10G‑LRM compatible SFP+ 10G LRM transceiver 10GBASE‑LRM 1310nm 220m multimode LC DDM fiber optic module
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale Cisco Nexus switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for Cisco switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lr module 1310nm 10km smf for Extreme switch

Download