• HYTOPTODEVICE Cisco compatible 1.25G 120km DWDM SFP module
  • cisco compatible 1000BASE-DWDM SFP module from hytoptodevice
  • hytoptodevice compatible 120km long-haul DWDM optical transceiver with DDM monitoring
  • Bulk buy Cisco compatible DWDM optical transceiver HYTOPTODEVICE
  • HYTOPTODEVICE Cisco compatible 1.25G 120km DWDM SFP module
  • cisco compatible 1000BASE-DWDM SFP module from hytoptodevice
  • hytoptodevice compatible 120km long-haul DWDM optical transceiver with DDM monitoring
  • Bulk buy Cisco compatible DWDM optical transceiver HYTOPTODEVICE

Cisco C53 DWDM‑SFP‑3504‑120 Compatible 1.25G DWDM Optical Transceivers | 1000BASE-DWDM 1535.04nm 120km 100GHz | HYTOPTODEVICE

High-performance Cisco C53 compatible 1.25G DWDM optical transceiver replaces original DWDM-SFP-3504-120. Featuring 1535.04nm wavelength and 100GHz ITU grid, this SFP module delivers stable 120km single-mode transmission. Factory calibrated for batch procurement, telecom DWDM expansion and enterprise long-distance network upgrades. 
 CH Cisco Compatible P/N Remark
CH50 DWDM‑SFP‑3740‑120
CH51 DWDM‑SFP‑3661‑120
CH52 DWDM‑SFP‑3582‑120  
CH53 DWDM‑SFP‑3504‑120  
CH54 DWDM‑SFP‑3425‑120
CH55 DWDM‑SFP‑3347‑120
CH56 DWDM‑SFP‑3268‑120
CH57 DWDM‑SFP‑3190‑120
CH58 DWDM‑SFP‑3112‑120
CH59 DWDM‑SFP‑3033‑120
CH60 DWDM‑SFP‑2955‑120
CH61 DWDM‑SFP‑2877‑120
Description

Cisco C53 DWDM‑SFP‑3504‑120 Compatible 1.25G DWDM Optical Transceiver | 1000BASE-DWDM 1535.04nm 120km 100GHz | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE C53 1.25G DWDM optical transceiver serves as a cost-effective, fully compatible substitute for the Cisco DWDM-SFP-3504-120 module. Tuned to the standard C53 ITU channel at 1535.04nm (195.2 THz) with precise 100GHz channel spacing, this 1000BASE-DWDM module delivers consistent, low-latency transmission up to 120km over standard single-mode fiber. Optimized for carrier-grade DWDM multiplexing systems and enterprise cross-regional network construction, it is an ideal choice for large-scale module renewal, wavelength resource expansion and project bulk procurement.
Built with high-precision TEC wavelength locking components and high-sensitivity APD receivers, this DWDM transceiver effectively suppresses adjacent-channel crosstalk in high-density wavelength environments. It supports intelligent DDM real-time diagnosis, tool-free hot-swap installation and 24-hour continuous low-power operation. Every production batch undergoes rigorous wavelength calibration, optical power consistency testing and long-duration aging screening, ensuring uniform and reliable performance for commercial network deployment and engineering delivery.

Key Technical Specifications

 Cisco Compatible DWDM-SFP-3504-120 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1535.04nm Max  Distance 120KM
Connector Duplex LC Transmitter Type DWDM DFB (Cooled)
Cable Type SMF Receiver Type APD
TX Power 0~+5dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤2W Receiver Overload -10.0dBm
Protocols SFP MSA, SFF-8472 Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Connector: Use OS2 single-mode fiber with LC-UPC connectors only (LC-APC strictly prohibited). Match transceiver wavelength with your DWDM ITU channel.

  • Optical Attenuation (Crucial): Never direct-connect! Since Tx reaches up to +5 dBm, install a 15–20 dB inline attenuator at the Rx port during lab/short-link testing to keep input power below -10 dBm and prevent receiver burnout.

  • Architecture: Built with a Cooled DFB (TEC) transmitter and a APD receiver (sensitivity ~ -32dBm,32 dB link budget).

  • Thermal Management: Operating temp: 0°C to 70°C. Proper airflow is essential for TEC wavelength locking to prevent link drops.

  • Handling: Supports hot-swapping via bail latch. Always clean LC fiber end-faces before connection.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
Optimized firmware enables zero-alarm recognition and safe hot-swap for bulk C53 DWDM optical transceivers on mainstream Cisco switches, routers and optical transport systems, fully compliant with official Cisco DWDM standards.
  • Cisco Catalyst 2960/3560/3750/3850/9200/9300 Switch Series
  • Cisco ISR 1900/2900/3900 Integrated Service Routers
  • Cisco ASR 1000 Aggregation Service Routers
  • Cisco ONS 15454/15310 Optical Transport Systems
  • Cisco ME 3400/3600/3800 Metro Ethernet Switches

2. Multi-Brand Cross Compatibility

This DWDM optical transceiver complies with MSA standards and passes full interoperability tests. It runs stably on mainstream multi-brand network devices with no packet loss or link flapping.
  • Huawei AR / CE / S Series Switches & Routers
  • H3C S / ER / MSR Series Network Devices
  • Juniper EX / MX Series Routing & Switching Platforms
  • ZTE, MikroTik, TP-Link Enterprise-Grade Network Equipment

3. Free Value-Added Services

We offer exclusive free value-added services for all C53 DWDM transceiver modules to reduce your project deployment and maintenance costs.
  • Free custom EEPROM programming for special and legacy network environments
  • Lifelong free firmware refitting and version upgrade
  • Free pre-sales link budget calculation and loss evaluation
  • Free batch testing report and product qualification documents

Primary Application Scenarios

  • 120km long-haul metro DWDM backbone construction and wavelength expansion bulk projects
  • Telecom core network long-distance fiber backhaul and system upgrade
  • Cross-city enterprise private network and industrial park long-link interconnection
  • Multi-service aggregation for 100GHz DWDM MUX/DEMUX systems
  • Smart city and industrial long-distance optical transmission engineering
  • Bulk replacement of aging Cisco long-haul DWDM optical transceivers

Connectivity Solutions(Applications)

1.
Direct Cabling DWDM Solution
Cooperates with DWDM MUX/DEMUX devices to realize multi-wavelength multiplexing transmission. It supports efficient bandwidth aggregation, saves fiber resources, and is suitable for short-to-medium distance dense DWDM networking and data center interconnection.

hytoptodevice 120km fiber transceiver for Direct Cabling DWDM Solution with MUX DEMUX 1.25G

2. 120km Long-Haul DWDM Solution

Matches EDFA optical amplifiers to compensate link loss, stably supports 120km ultra-long single-mode transmission, and meets cross-city backbone, telecom core network and long-distance enterprise private network deployment requirements.

hytoptodevice 120km Long-Haul DWDM Solution with EDFA amplifiers


The Core Feature

1. Low-Power Data Center Efficient Connectivity

Under 2W low power design supports 24/7 stable data center operation. It reduces power consumption and heat output, enabling energy-efficient, high-stability DWDM long-haul connectivity and multi-service aggregation.

HYTOPTODEVICE low power DWDM optical transceiver, energy efficient data center network connectivity


2.
Verified Host Interoperability for Cisco Devices

Optimized firmware and precise calibration ensure full Cisco compatibility. All modules pass real-device verification for zero-alarm operation and safe hot-swap, matching official Cisco DWDM standards.
HYTOPTODEVICE multi‑brand compatible optical transceiver module, fully verified network host interoperability

3.Rigorous Testing, Uncompromising Reliability

Each optical transceiver undergoes full testing including wavelength calibration, optical power detection, 72h aging, 120km transmission pressure test and DDM verification, ensuring stable batch performance for commercial and engineering projects.

HYTOPTODEVICE full tested carrier grade optical transceiver module, high stability long haul optical equipment


FAQ

Q1: Can this C53 120km DWDM transceiver sustain stable full-range transmission in actual network engineering?
A: Yes. Our C53 DWDM transceiver is fully validated on standard G.652.D single-mode fiber. With reasonable link loss control and matched EDFA amplification configuration, it delivers stable error-free 120km transmission in real telecom and enterprise network environments, complying with commercial project delivery standards.

Q2: What total link power budget is required to guarantee reliable operation of this 120km DWDM module?
A: A 120km link generally requires a total power budget of around 32 dB. Ensure your fiber plant loss plus connector losses fit within this budget. This reserved margin offsets fiber attenuation, splicing and connector loss, as well as minor link aging, ensuring long-term stable transmission.

Q3: What is the upper limit of input optical power to prevent APD receiver burnout?
A: This C53 transceiver’s built-in APD receiver is equipped with over-power protection. The maximum safe input optical power is +3dBm. Exceeding this threshold will cause signal saturation and permanent component damage, so deployment must strictly follow standard power parameters.

Q4: Is it necessary to deploy optical attenuators for short-distance testing and low-loss links?
A: Yes. For testing scenarios or transmission links shorter than 40km with low natural attenuation, external optical attenuators are mandatory. They avoid excessive received optical power, protect the APD receiver, and maintain long-term operational stability of the DWDM module.

Q5: Which single-mode fiber type delivers optimal performance for this 1535.04nm C53 transceiver?
A: This C53 DWDM transceiver is professionally optimized for G.652.D single-mode fiber, the most widely used fiber type for telecom long-haul transmission. It also provides stable transmission performance on G.657 bending-resistant single-mode fiber, adapting to most metro and backbone network deployment environments.

Q6: Which ITU grid standard does this C53 DWDM module support for wavelength networking?
A: This module strictly complies with the 100GHz ITU-T grid standard (195.2 THz / 1535.04nm) and is fully compatible with all 100GHz DWDM multiplexing systems. It does not support 50GHz grid equipment, ensuring precise wavelength alignment and zero crosstalk in high-density wavelength networking.

Q7: How does temperature fluctuation affect the wavelength accuracy of this bulk DWDM transceiver?
A: Equipped with high-precision TEC intelligent temperature control chip, this C53 module controls wavelength deviation within ±0.1nm in the 0°C~70°C working temperature range. Excellent thermal stability prevents adjacent channel interference and maintains consistent DWDM multiplexing performance under variable temperature conditions.

Q8: Does this C53 DWDM module support plug-and-play on multi-brand network devices?
A: Absolutely yes. Complying with universal MSA standards and equipped with adaptive firmware, our C53 module is compatible with mainstream devices including Cisco, Huawei, Juniper, H3C and ZTE. It achieves zero-alarm operation and is suitable for mixed-vendor network deployment and batch procurement.

Q9: Can this 1.25G SFP module work normally in universal SFP+ dual-rate ports?
A: Yes. This 1.25G DWDM SFP module supports automatic rate identification of SFP/SFP+ dual-rate slots. It operates stably without port alarms or rate mismatch, offering high flexibility for network device compatibility and system upgrade.

Q10: Does this long-haul DWDM transceiver support real-time digital optical monitoring functions?
A: Yes. All C53 DWDM optical transceivers support standard SFF-8472 DDM/DOM real-time monitoring. It accurately displays real-time data such as operating temperature, working voltage, transmit power and receive power, facilitating daily operation maintenance and project acceptance detection.

Q11: What is the typical power consumption of this 1.25G 120km long-haul DWDM SFP?
A: The typical power consumption of this module is less than 2W. The ultra-low power design effectively reduces long-term operating energy consumption and equipment heat load, making it highly suitable for 24/7 continuous operation in data centers and telecom computer rooms.

Q12: Can EDFA optical amplifiers be matched with this 1.25G 120km DWDM SFP for long-distance transmission?
A: Yes. This C53 DWDM module is perfectly adapted to EDFA optical amplifiers. EDFA effectively compensates fiber link transmission loss, enabling stable 120km ultra-long-haul transmission, which is the standard matching solution for long-distance DWDM engineering deployment.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • HYTOPTODEVICE Cisco compatible 1.25G 120km DWDM SFP module
  • cisco compatible 1000BASE-DWDM SFP module from hytoptodevice
  • hytoptodevice compatible 120km long-haul DWDM optical transceiver with DDM monitoring
  • Bulk buy Cisco compatible DWDM optical transceiver HYTOPTODEVICE

Download